Touchpad is not in harmony with my orders.

Similar Questions

• Scrolling on the touchpad does not. U410 with Windows 8.

  Scrolling with two fingers on my touchpad sometimes does not work. After the reboot, it works. I installed the new drivers yesterday and it worked fine all day, but at the end of the day is has stopped working again... Any suggestions?

  Thank you!

  
  

• Manuel Standby Database not in harmony with the missing archivelogs

  Hello
  
  Operating system: Solaris
  DB: Oracle 11.2.0.1 EA
  Do not use RAC or ASM
  
  I have a Production database which is in archivelog mode and standby server DR.
  The two servers (Prod, standby) have the same structure and exact db name/version.
  
  We manually scp archive logs and recover them to a database of manual standby via the SQL Scripts "cron". (I.e. the value of automatic recovery on; restore database Eve ;))
  Recently, we got out of sync with our log files and were not applying on the eve. As part of the maintenance of the Prod, these log files have been removed and are no longer available.
  I tried several ways to 'rebuild' our database awaiting. I tried to prod Shutdown, backup all files db and scp sleep them, recreate standby controlfile and startup mount and recover the.
  Whenever I try to apply a new journal archive via recover Eve, here are the errors:
  
  ORA-00279: change 211077622 September at 27/01/2012 12:18:42 necessary to screw 1
  ORA-00289: suggestion: /oradump/arch/PROD/PROD_arch_1_69486_736618850.arc
  ORA-00280: change 211077622 thread 1 is in sequence #69486
  
  
  ORA-00308: cannot open archived log ' / oradump/arch/PROD/PROD_arch_1_69486_736618850.arc'
  ORA-27037: unable to get file status
  SVR4 error: 2: no such file or directory
  Additional information: 3
  
  ORA-10879: error reported in parallel recovery slave
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' / oradevices/PROD/oraPRODsystem1.dbf'
  
  When I check v$ log_history, new newspapers have not been implemented.
  I also tried the method 'Restore from incremental backup via YVERT' with the same results.
  
  Is there a way to re - create own forward and ensure that the chain of the newspaper which is now defective gets fixed or reset?
  Finally, I would get DataGuard here, but this isn't the case at the moment.
  Thanks for your suggestions.
  
  -Dav

  If you use the backup to cold to create the database pending, check whether you have followed these steps.

  1. Remove
  all the data files and the database pending controlfiles.

  2. create a new controlfile eve of production to standby by using the following command
  "change the database create controlfile as 'Location'"; "."

  3. move the controlfile back to the location of the server database of such relief as specified in the initialization parameter file.

  4. replace its appropriate place that was taken through cold backup all data files.

  5 startup nomount

  6 change the mounting base pending;

  7 restore database pending.
  CPS archives newspapers sequence which is posed by the database of the production.

  You can try these steps.

• firefox 38-how can I get the box options old back and NOT a browser with the orders page?

  I want to go the pop up box that opens when I go to TOOLS - OPTIONS and NOT a web browser page. How do I do that?

  The browser.preferences.inContent is no longer supported in Firefox 42 and later is not possible to open an independent window by setting this pref to false.
  Bug 1140495 - Remove glass preferences support

  Optionally, create a button on the toolbar of bookmarks for the subject: preferences and hold the Shift key and left click to open the page in a new window.

  You can watch the extension Classic theme restaurateur.

  • General UI (1): The options Page (topic: preferences) in a window
  • https://addons.Mozilla.org/firefox/addon/classicthemerestorer/

• Cannot start, it updates - computer time is not in harmony with an updated certificate

  Hello

  When you run Windows update in Windows XP, I had
  http://www.4shared.com/photo/E01o8Y7L/fig143.html

  But the date & time of the machine is actually very good. Any advice?

  Thanks a lot & best regards, human Chen

  see if that helps

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Model of session not in sync with the Http Session

  Hi all
  
  I have an application developed in JDev 11.1.1.4 and we do not use the ADF security for the connection.
  The problem occurs, random is that some of the LOV on my homepage get null (having no data). These LOVs are met using the values passed as a parameter of the feeder link (values fundamentally HTTP session to the web layer). So I added a method in the workflow to set the value of session at the model layer (default method). Also, each call to the call of the Impl Am I am setting the value in the HTTP session and then call the method, but some how what is the value of model session level is not in harmony with the HTTP session and the list is empty.
  
  The entries of what I can do to get out of this prblm?
  
  thnk

  In this case you need to replace the method of activateState/passivateState of your store/bed and am the values of the xml structure, you get as parameters to this method.
  For more information, see the docs http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcstatemgmt.htm#sm0495

  Furthermore, is nothing, you must open a SR on that it works as expected.

  Timo

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR

• Satellite PRO A200-1 s 1 with Windows 7 x 32. Touchpad does not work

  Hello world
  I installed Windows 7 on my Satellite Pro A200-1 s 1, recovered all the drivers on the Toshiba site, everything works fine (less than the webcam that doesn't work even with the previous s.o. XP or Vista...). But my Touchpad does not work... No Fn + F9, no drivers, nothing works. And in my control, Manager of Panel devices seem to be going well.
  Any suggestion?

  Hello

  You reinstall the driver for the touchpad?
  Check it!

  Also check if the option disable touchpad when USB mouse is connected is not checked. That are in the control panel-> mouse-> device settings

• Satellite C660-1CN - touchpad do not start with Windows

  Hello
  I have problem with Toshiba Satellite C660 - 1CN PSC0QE.

  Touchpad do not start with Windows 7 Home Premium.
  All the drivers are up to date.
  BIOS - lastest.

  After logon, I need to click on * double * "FN + F9" and after it is OK until the next reboot.

  I tried:
  several drivers of Synaptics - no change.
  Reinstall Windows - no change.
  Mini Windows XP Hiren - no work.
  Default BIOS - no change

  After that I installed 'toshiba value added package' I can't turn on the touch pad at all.

  To be honest, I never heard the show. According to specification for laptop, your laptop came with Win7 home premium 64-bit. With factory settings touchpad should be activated after the OS has started.
  I can read you have reinstalled Windows. Have you reinstalled with the original recovery image and tested with factory settings?

• Tecra M3 - touchpad does not work with Windows 7

  I have a Tecra M3 I've updgraded to Windows 7. The touchpad does not work.
  The Web of Toshiba site has a Windows 7 drivers for this model. I tried install the driver of the touchpad and PVAT from the A11 model but still cannot make it work.

  Can anyone help? The audio is not working either.

  This old Tecra is not supported for Vista, so it can be difficult to find the correct drivers.
  I can see Tecra M4 is supported for 32-bit Vista, so use this with Win7 32-bit Vista driver in the hope that this will work.

  Audio driver? Let Win7 look good pilot. By the way: your Tecra has AnalogDevices AD1981B audio chip inside. Try to find the right driver Googling autour.

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite A350-20 q - Touchpad does not

  Hello members,

  I have a Satellite A350-20 q that is running a Windows Vista Home Premium 32-bit operating system. The problem is with the touchpad which stops working when the laptop is connected to the
  AC power supply and everything that happens, I can feel the static on the buttons near the tablet which are metallic.

  The touchpad works fine when it runs on battery and it causes a lot of trouble because I move around a bit and can't take my mouse around.

  I called Toshiba support, but all said, it was to replace the charger that does not make any sense to me but I try, and again, it doesn't help much.

  The touchpad works very well when Vista is installed and is not updated, but once the system is fully updated it starts to cause problems and I can't yet determine which update is the cause of the problem that there are many Windows vista updates are installed.

  Help, please!
  I installed all the drivers and have the latest synaptic driver installed on the system right now.

  Thank you.

  Abhishek

  > I had called support of Toshiba, but all said, it was to replace the charger that does not make any sense to me but I try, and again, it doesn't help much.

  I think that this logic because the touchpad does not work ONLY when the AC adapter is connected.
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141976𢪘
  He has helped about the similar issue and replacement AC adapter!

  > The touchpad works very well when Vista is installed and is not updated, but once the system is fully updated it starts to cause problems and I can't determine same update is the cause of the problem that it is has many windows updates vista that are installed.

  How a windows update to do the buttons on the touchpad statically? It is meaningless for me so be it hardware or software s problem

  If this software (update of the OS) then deliver the power adapter should not all affect on the buttons on the touch pad but if there s a hardware problem, then the OS updates should not affect the functionality of the touchpad as well

  I think that it s a strange question and you should get in touch with a local ASP (partner) in your country in order to check the touchpad.

• Satellite P300D - touchpad does not work

  I have a Satellite P300D-131 with Windows 7 64 bit. The touchpad does not work.

  Activation with Fn + F9 has no effect. The device manager says that the device is functioning.
  Who knows the reason? Could be a driver problem.

  Where can I get a driver appropriate? I already searched the Download Center of Toshiba software without success.

  On this virtual path, it is not easy to offer a diagnosis in order to answer your question may be some speculation on the possible reasons.

  In your ad, it is not clear since when you have this problem.

  I installed Win7 64 bit on several laptops P300 and everything was ok.
  Since when you have this problem? I can't imagine touchpad doesn't work all the time since when you use Win7.

  It is interesting that I ve seen that Windows update offers updates of the driver Synaptics listed as optional update. Perhaps you have it installed?

  Did you install driver touchpad of Toshiba download page? If Yes, have you tried to remove it and test the features?

  Does touchpad work in safe mode?
  Open the properties of the mouse and check if peripheral is enabled/disabled?

• Problem with an order

  From here to the United Kingdom, I placed an order on the site Apple.com for an iPadPro more coverage and paid with my credit card of the United Kingdom. It was a gift and I wanted it to be delivered to my brother in San Diego, the order went through fine. The cover was delivered by UPS, no problem. The iPadPro has not been delivered however the OnTrack driver said the package was delivered but the delivery note showed a false signature. Apple investigative team have been informed and a few days later a another iPadPro was actually delivered to the correct address, this time by UPS and signed for the wife of my brother... all fine - however yesterday (a few days later), a package was left (unopened) and anonymously on his doorstep so he informed Apple and they didn't know what to do! After discussion with another Member of the staff of my brother said that, because I ordered it since the United Kingdom I would receive a tag back for me to then send it to my brother so that he can return the iPadPro to Apple, they even had the nerve to tell him to take it back to an Apple store! What an absolute mess! and disgusting service - I wish that I had not bothered with online ordering, I should have transferred money to my brother instead. Of course no apologies and nowhere near a satisfactory transaction, I use Apple products since 1986 without problem at all here in the United Kingdom... pathetic.

  A question to the technical support that we, your fellow users might be able to help you? In the case of contrary and youyou want just to provide feedback to Apple, this isn't the place. Apple is not read here. Use the comments link:

  http://www.Apple.com/feedback