Touchpad is not woreking - frozen cursor

Similar Questions

• Lenovo s g80 touchpad does not (far left, to be more precise on the thick part of 5 cm), the cursor moves sometimes

  A part of the my s g80 lenovo touchpad does not (far left, to be more precise on the thick part of 5 cm), the cursor moves sometimes, bought this tour only 2 weeks before. I use especially the usb mouse, so never experienced this problem before, I do not know if it is still there since I bought. I contacted lenovo saying this problem, they asked to reinstall the driver for the touchpad from the link given, the problem persists and they claimed his driver with w7 incompatibility and reinstall the operating system? Please say a solution for this problem, I can't change the os now :(

  Lenovo/support forums is the place to ask, its their software/driver.

  Unless of course you make the mistake of using windows update for drivers, if so try to make back the driver, or reinstall on the Lenovo support site

• Mouse/Touchpad does not work

  I have a hp 2000-bf69wm, 8 64-bit windows.

  The touchpad does not work and is not a mouse cursor. Any suggestions?

  You could try a Hard Reset.

  Forced to Power Reset - "Hard Reset".

  • Perform the Hard Reset .  Start the computer and connect

  Hard Reset is a reset of the driver; This isn't Windows 8 resetting that installs the operating system.  The procedure to hard reset does not erase your files or it destroys your Windows installation somehow.

  Why a power reset works to solve some problems:

  Hard Reset erases the pilot instructions that generally persist to boot-to-boot.  The Hard Reset is a way to force the computer to read the instructions of drivers and software stored in the operating system.  The compensation action and forcing a new reading on the disk and software drivers can solve some problems.

  Sign in and check...

  =====================================================================================

  Find, open, and read the following file named: difficulty TouchPad / ClickPad

• Touchpad is not working properly in the Satellite A200

  I have wired rather question for you, may be common.
  Touchpad on my laptop is not working properly, and I'm wondering someone can tell me what 'wrong with it. My problem is at the bottom,

  When I turn on the laptop, I can connect to the through the use of the touchpad, but after I logged in the only thing that I can move the pointer over the programs, but I can't double click or do anything else. When I double-clicked the icons it does nothing.

  So I thought I might turn off something by mistake, can I use the touchpad to connect.

  Can someone please tell me how to solve this problem or what I can bring to a service center?

  Hello

  If you can still move the cursor using the touchpad touchpad is not disabled.
  Perhaps a button configuration has been changed.

  Usually, you can configure the touchpad the touchpad settings.
  Did you check that?

  You can find the settings in the control panel-> mouse
  There should be an Advanced tab.
  Go ahead and check the settings of the advanced feature.

  Here, you can configure the simple buttons and also the touchpad.

  If you will not be able to reach these settings so I recommend reinstalling the driver for the touchpad again!

  Good bye

• frozen cursor need help

  laptop Presario CQ60, p/n NB2276UA. frozen cursor. Methods

  has tried without success: 1-held power until the wide button. poweroff 2 walls and the battery for 30 seconds. Replace the battery & connect to the power supply. Pressed power on b utton while pressing F10 repeatedly. has selected normal startup.

  In addition, have no external mouse and have 3recovery disks but don't know how to use.

  Old man needs help. Thank you

  Hello

  Still in Safe Mode, open windows control panel, open Device Manager and open 'mouse and other pointing devices '.  Right click on your touchpad device and select Properties.  Click the driver tab and then click on the "Roll Back Driver" button.  Wait for this process to finish, and then restart Windows to start normally.  See if this contributed to the issue.

  Kind regards

  DP - K

• Dell place 11 Pro keyboard - touchpad does not

  touchpad does not now

  has worked for 2 months - then stopped working

  noticed 'urgent' download for touchpad on dell driver support page - downloaded and installed

  still does not

  pls advise

  I actually found a way how to solve this problem. Tried above all, disconnect battery, registry fixes and etc... In all cases at some point touchpad become unresponsible. But what I found accidentally - while the touchpad is not respond to gestures and does not move a cursor - function click on the touchpad still works. in any case, this close to me do not have a solution.

  As always, the solution is just magic - all you need to do to restore a bloody thing - is to run SynaUtilitySfx.exe, while the Tablet is connected to the keyboard. The utility will fail saying that the touchscreen device not found - but this will allow touchscreen and a touchpad. Despite I'm an IT professional - I can't explain what is happening, but this method has worked for me.

  I disconnected the keyboard shelf and set the keyboard on the charge, which immediately ruined the touchpad when I connected the keyboard for Tablet. I ran new SynaUtilitySfx.exe - all work. A few times to prove: it does not fix the bloody thing!

  You can get SynaUtilitySfx.exe stuff from the dell Web site, they call it Panel Touch Firmware on Dell place 11 Pro 5130.

• Precision touchpad 7510 periodically freezes, the cursor moves its own

  Just got a new Precision Mobile Workstation 7510 a week ago. Out of the box and before installing updates or new software, the touchpad randomly every minute or so, stop answering the entry and the cursor would be very slowly thumbs itself (usually slightly crawling upward and to the right). This would happen for anywhere from a few seconds to 10 or if, before the touchpad would start working again. No change in the past week.

  The pointer stick works as usual at the time the touchpad does not.

  I tried all of the suggestions I found recommended or would think:

  • Reinstalling Windows from the original image (did this two times)
  • Reinstall the driver (I already had the last being, but I also well reinstalled and then removed and reinstalled version freshly downloaded from the latest version provided on Dell.com)
  • Disable the pointer stick
  • Deactivation of gestures
  • Unplug all devices, including the power adapter
  • Restart in Mode safe (persists, although maybe the normal touchpad driver is still loaded in Mode safe)

  I was about to call Dell (I support Pro) thinking that it is a problem material, but interesting, there is no sign of trouble in the compatible installation screen mouse Dell GUI BIOS. I guess if it's a hardware problem, it would still appear there.

  FWIW, the icon of Dell touchpad in the toolbar State system sometimes, but not always, poster touchpad entry at the center of the touchpad when this happens. The movement of the cursor is very slight - at a rate of a few millimeters to each instance, for a total of about an inch of arrow for more than 10 minutes (I'm looking at do it now while I have this post from my old machine).

  Suggestions for anything else to try before I call support and schedule a call for a touchpad/palmrest of replacement?

  Don't want to jinx it, but... it's been about 24 hours that the tech came out and replaced my touchpad and things worked great since then.

  It seems that it was a material that delivers a replacement is resolved.

  Thanks to Terry for configure sending tech support without making me go through all the hoops to talk to tech support. I have long been happy with Dell ProSupport, but Terry help me set up just to do very easily. Thank you!

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite U940-103 with Linux - Touchpad does not & poorly programmed FN keys

  Hello

  I bought a toshiba Satellite U940-103, and I installed ubuntu 13,10 dual boot with windows 8.1.

  The problem is that the touchpad is not working and the fn are false (fn f2 key suspend the computer instead of the brightness control).

  I tried to install linux different sistem (Mint cinnamon 15, 13.04 ubuntu, ubuntu 12.04.3) but they still have the same problem, even in the live cd.

  I tried to ask the Italian Forum of ubuntu, but they have solutions do not work...

  Thanks for the help
  Yun

  * PS.* sorry for my bad English. Is it normal that my laptop seems overheated and my battery life seems to be reduced when I use Linux?

  Hello

  Yes, you're right!
  In the direct (stable mode without having to install), the touchpad does not work.

  However, once installed, it will work.

  In regards to shortcut keys, yes they are mapped correctly.
  They are treated to the old-fashioned way (former Toshiba models had the mapping used by Linux on this model).
  If you want help, file a bug report on bugs to Ubuntu system.

  You can always change the brightness by using the GUI (Control Panel > brightness & Lock).

  Fun with Ubuntu on your device!

  Tom BR