Touchpad no longer works on NB100-12 has

Similar Questions

• Touchpad no longer works when Equium L40 has been moved

  I have 2 laptops computers Equium L40 x.
  Both have recently begun to encounter the same problem with their keyboards.

  For some reason, whenever the laptops are horizontal, the keys do not work.
  However, once the laptop is tilted, the touchpad works very well.
  I can then return the phone horizontally, where he works, until the next time he decides to stop working!

  I would have thought it was an isolated issue, but for the fact that it happens on BOTH my laptop!
  Laptops were both purchased in August 07, and so, unfortunately, both are guarantee.

  Anyone experienced the same thing, or give me any advice to offer?

  Hello Nik

  Your story sounds really amazing. I have never heard something like that. Tilting laptop is not for me so good idea. What do you think about this? :)

  Sorry, but I don't know if anyone here can offer explanations. The best thing you can do is to show it to the service. Perhaps there is a contact problem. The strange is that you have noticed the same problem on two laptops.

  Have you noticed that from the first second, when the notebook is on or later after some time?

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Satellite C70 - A - 15 d - Touchpad no longer works

  My touchpad no longer works. Windows 8.1.

  New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

  Any idea where I can get the zip file of work?

  Are there function keys that enables / disables the touchpad?

  Thanks for the tips!

  + The message was edited: model number added to the object.

  many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Split 13 x 2 touchpad no longer works

  I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

  Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

  Hope this works for you.

• Satellite C55 - Touchpad no longer works

  Hello

  The touchpad on my C55 no longer works.

  After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

  A few days ago, I think that some Windows updates have been launched.

  Is that what someone else has had this problem and can you give me a solution please?

  In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

  The driver for the touchpad seems to be ok.

• Mouse Touchpad no longer works correctly

  My touchpad mouse no longer works correctly.  I'm unable to double-click, even after changing the speed setting in the control panel.  In addition, items are selected when appropriate without a click. This could be a virus or a definition that has been accidentally changed?  I tried to restore to a previous point, when things were working properly and that did not help.

  Check with your PC manufacturer for support.  You may need to update your driver.

• Synaptics Touchpad no longer works correctly

  Hello Internet!

  Hear my fate and tremble: I recently updated my drivers from the official manufacturer website Synaptics touchpad.  Before the update I could press twice on the upper left of the touchpad to enable and disable the touchpad.  It is a convenient feature that I have grown very fond of.  However, after the update this feature no longer works!  I'm so devastated...  I really enjoyed watching the pretty light outline of my touchpad to turn to a hurt red when it has been disabled.  I suppose I could return the drivers back to their old form, but I wanted to check if anyone knew a separate fix so that I could have as well the new drivers and the old features that I loved so much.

  My model number is: A6Y49UA #ABA

  My operating system: Windows 7

  Thanks for your help, I remember you when I am the dictator of the world.

  Hi @El-Nacho .

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I see that you updated your driver from the manufacturer's website.  HP recommends that the drivers listed on the HP driver page.  These drivers have all been tested and known to work properly. When you install the drivers of the manufacturing site, they may or may not work properly with your laptop.  Can of OEM and sometimes change a driver so that it works properly with your exact laptop.

  Download or update of software and drivers for HP computers

  If you don't have a problem with the old driver, I suggest you do a roll back driver.

  15.3.11.0 is the version recommended for your laptop and Windows 7.

  Here is a link to the driver download page if you need it. HP Pavilion dv6-6c10us Entertainment Notebook PC Drivers

  Good luck!

• Satellite M70 PSM73C - touchpad no longer works

  For some reason any my touchpad isn't working.

  After trying unsuccessfully to get it working again, I found the software installation driver (tpdrv-xp - 603056.zip) on the Toshiba site.
  I thought I would uninstall and reinstall to fix the problem, but when I try to start the installation I get the cryptic error messages.

  The shield of the installation does not work yet.

  Anyone who has had success or knows how to get this software to install the touchpad?

  Thank you.

  What error message you get exactly?

  To reinstall or update the driver for the touchpad, you should delete the old first in Add/Remove Programs, restart your computer and install the new version from the Toshiba site.

  Check this box and post your result.

• Portege R600-10 q - Touchpad no longer works

  Hello

  My touchpad has stopped working. I tried to turn on and off with the FN keys and this did not help - can someone let me know what I can do to get it working?

  brand

  Hello

  Maybe you should put the exact cell model and the OS you are using.
  What do you think about this?

  In any case, what happens if you connect an external mouse? Can you work with it?

  What is the other FN keys work? Perhaps only the utility ON / OFF touchpad isn t work and can be solved with a new installation.
  In addition, you must update the driver for the touchpad.

  Good luck!

• Satellite Pro L450D - 12 X - pad touchpad no longer works

  My daughter used the laptop earlier, when suddenly the mouse pads and buttons right and left click stopped working.

  I tried to restart and even restore to an earlier time, but nothing he will work again.

  Any ideas what this could be and how it can be sorted?

  Thank you.

  Hello

  Have you checked if the touchpad has not been disabled by mistake using the FN + F9 keys?
  Please check this box.

  In most cases, this tiny option would be to neglect and in most cases, this is the reason why the touchpad does not work.

• Synaptics touchpad no longer works on Qosmio G50-133

  My Qosmio G50-133 suddenly lost it of keypad touch, it no longer works, the panel of mouse control shows the synaptics without any inside information tab.
  I uninstalled, rebooted my windows 7 with no luck and I just can not find a driver for it on the toshiba site or anywhere...

  Sosmeone there a clue?

  Hey cool.
  Thanks for the comments.

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them