touchpad not working not as same as before

Similar Questions

• Security computer analyzed online company and the computer is not the same as before.

  Original title: microsoft tech 35?

  I had a security scan my computer online company, they said they found like 35000 problems. They said that many of them were only a technician 35 microsoft able to solve questions. I told them that I wanted my money and they wanted to charge me another 350.00 to fix. My computer is not the same as it was before, and I would just it back as it was. I tried to restore to yesterdays configuration, but it is not the same... Please help!

  Sunday, September 23, 2012 15:06:37 + 0000, nickguthrie wrote:

  I had a security scan my computer online company, they said they found like 35000 problems. They said that many of them were only a technician 35 microsoft able to solve questions. I told them that I wanted my money and they wanted to charge me another 350.00 to fix. My computer is not the same as it was before, and I would just it back as it was. I tried to restore to yesterdays configuration, but it is not the same... Please help!

  Why do you have do this them? Have you contacted them or the fact that they call
  you?

  If they call you, it's a scam and with various names and phone
  numbers, who becomes very common lately.

  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, which knows what losses they did are
  where confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.
  2. change all of your passwords, especially banks or other
  financial sites.
  Ken Blake, Microsoft MVP

• Keboard and Touchpad 355 G2: Does not work at the same time

  Hello

  I am trying to configure my laptop for games, but I can't get my touchpad and keyboard work at the same time. I tried to disable palmcheck but that did not work. Anything else I could do?

  Thank you

  Hello

  Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.

  You too, can be able to work around this problem as follows.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  Version of the Synaptics 17.0.18.8 driver

  Disable your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.

  If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

  Note: If it does not, your existing driver are here.

• HP Envy 17 J099nr: touchpad not working-Windows 10

  Just upgraded windows 8.1 10 last night after finally got my laptop working again (broke 2 times with perhaps years of use value) and now my touchpad does not work. It was working fine all day and now it just stopped. And if I try to go into advanced options of mouse all that he says are "control panel extension is incompatible with the version of the driver," but the stripping of everywhere I see all the drivers are up to date and does not even give me an option to update.

  BaggierGordon41

  Hello;

  Let me welcome you on the HP forums!

  I read your post on the sudden touchpad problems in Win10 and wanted to help.

  Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.

  You must go to settings, update & Essensials--> Windows Update.

  Then choose Advanced Options--> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, iff, you can, you should see if you can restore the drivers that are causing the problem.  Do you it by going into Device Manager, see if the wireless card is always listed and so, trying to restore the last driver update.

  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/

  If it does not, an alternative is something known as a repair installation.  It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.

  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10

  Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

  After that, some people have reported is that, by going in the settings of the BIOS on the main tab, by changing the Advanced setting at the base, their features returned.

  If this is not the same for the BIOS settings, or if that doesn't work, you can try to use the synaptic website touchpad drivers: http://www.synaptics.com/en/drivers.php
  Note the comment on the page to set a Restore Point before trying one of these drivers.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing happened until now

  Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing has happened so far.

  Same question, the lock in action field icon is absent.

• Touchpad not working not not Z580

  Hello.

  First of all, I hope that my post is placed in the right place.

  Since yesterday my notebook computer touchpad (Z580) stopped working after full initialization of Windows 7 (I can use it for a few seconds) so I know it is not a material thing. I've also updated my drivers, still the same problem. And I can still use a USB mouse.

  I searched the internet a solution but without success.

  I have my laptop for about a year and I'm very happy with it.

  Hope someone knows the answer.

  Jeroen.

  Tanks, but since this morning my touchpad started working properly again without doing anything special.
  I don't know what started the problem, I tried many different things without success, I also restarted my laptop several times yesterday, nothing worked.
  But I'm glad its not now.

  Thank you for your support.

  Topic can be closed now.

• Elan Touchpad not working not

  I ask this because I have not found a decent solution for my problem.

  Gigabyte P35G Laptop v2 running Windows 8.1 64-bit pre-installed. 'MOMENTUM input device' is what is to come on my device manager, but only after I select "hidden devices". It does not appear normally. It does not appear under Device tab MOMENTUM under mouse properties, and he does not like the material under properties of the mouse either.

  I completely uninstalled the driver and reinstalled. Nothing happened. When I select the device in Device Manager, I was informed that "this device is not present, is not working properly or is not all its drivers installed." Error code 24. »

  Pretty much anything, hoping that a more knowledgeable person can help do not find. I'm leaning towards the idea that my touchpad is simply broken.

  Hello

  Indeed, the touchpad can be broken (having a hardware problem). Check with the support of Gigabyte
  or a real computer store (that makes its own service in the workshop).
  Support for Gigabyte
  http://www.gigabyte.com/support-downloads/technical-support.aspx

  Gigabyte Downloads
  http://www.gigabyte.com/support-Downloads/Download-Center.aspx

  These can help:

  Panel of configuration-Device Manager - mice and pointing devices - Double click on the TouchPad
  -Pilot Tab - click on Update Driver (which is may not make anything as long as MS is far behind)
  drivers of certification), now RIGHT CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself
  (all in it). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here are the similar steps in XP, Windows 8, Windows 7 and Vista is the same, except
  We need clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 7 caused synaptics touchpad not working Windows Update

  Hello

  I ran the windows 7 updates from last night on my laptop HP G62-373DX.  When I started my computer touchpad not working.  I went into Device Manager & it is said that the touch pad is damaged or missing.  In addition my Kaspersky anti-virus is also disabled now.  I tried to reset the device and also made a system restore back to before I was running updates.  Neither work.

  Any suggestions?

  After talking with support for some time, they suggested I run a recovery, but I could not do this without a mouse (tab would not work to get me through the options).  I don't have a mouse so I thought I'd like to borrow a & then get back in touch with technical support.  In the meantime, I decided to try & get my anti-virus online.  Not sure if this is what fixed it or what, but after I downloaded the update for my anti-virus my touchpad started working again.  Perhaps, that was blocking the installation of the new driver?  Who knows, it works fine now so fingers crossed I don't have any problems more.

• Nightly Ubuntu connects not with Ubuntu 11.10 3.0.0 - 17-generic, but firefox 11.0 kernel is still working in the same kernel version (the source of the problem since 3.0.0 - 16A gave no problem)

  Every night of Ubuntu does not connect (crashes and doesn't stop not withouyt one kill pkill or root) with Ubuntu 11.10 and the recent 3.0.0 - 17-generic kernel

  11.0 Firefox still works in the same kernel version and I use it now. The source of the problem is perhaps the core Ubuntu since 3.0.0 - 16 core gave no problem

  Hello

  Please also check if this happens in a new profile. If the new profile is correct, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings in a different location (folder profile) separated from its files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

  You may also be able to find useful info here.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• Equium U400 touchpad not working not

  Laptop repair of my daughter: screen dead, volume control wrote letters to the screen when you use and the touchpad no longer works.

  Replace the screen and the palmrest which included the touchpad, but still can not touchpad to work.
  any suggestions?

  Now, the screen is good, but no idea what to do with control of volume.

  Any help appreciated.

  > Screen is now good, but no idea what to do with control of volume.

  I had a similar problem in my case it was related to dirty sensor.
  I could clean it with a jet of compressed air perhaps it was little dust between the volume wheel and the sensor that knows to clean it worked.

  On the touchpad:
  Well, I put t know what might cause this are sure you that it is not disabled by Fn + F9 key combination? Check the BIOS settings not sure if there is an option for touchpad but many BIOS also contains the power button for touchpad
  Otherwise, it might be possible that you have made some mistakes, while replacement of this part is all the cables connected properly?

• HP Jet 11 - d 010wm: touchpad not working not

  Hello

  I have a HP flow 11. I have upgraded to Windows 10 and had no real problem until I decided to update the drivers (I sent a message that drivers were outdated). I generally don't click on something like that because it causes problems and it was obviously the case.
  After the update, the touchpad stopped working. I tried various fixes, but nothing has worked.
  
  At one point, I went into Add / Remove programs and remove the touchpad Synaptics hoping that, when I rebooted, restart located the touchpad and the driver and reinstall correctly. I was wrong and I think it was a huge mistake on my part. Now I can't get the driver to work I downloaded.
  
  Is it possible that I can get the touchpad to work again. I use a mouse and that works fine but not effective for a laptop.

  Thank you

  Alisonf1

  There are five drivers chipset on hp.com for 11 stream and one is required for the touchpad work, I think it's Intel series IO driver without the support of connected intelligence.  Who install and reboot and see if that fixes it and if not, install the other four.

• Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64

  I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.
  Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course).

  Worse, it's that my touchpad (Synaptics) is listed in as a work Device Manager correctly. Hmm - I don't remember. Meet your possible suggestions - I tried to reinstall, I tried to use the A200 drivers (since Toshiba does not support drivers for Vista x 64 for line A100) and even had the newer drivers from the Synaptics site. Update Vista even me has new drivers - cool, I admit, but it still does not work, even if Windows does not seem to "know" about any help would be very appreciated :) it...

  PS (optional problem) I also have 2 unknown according to Device Manager devices - since I have no idea what they are, and because I don't think I'm missing something - I simply gave up on top of those - at least for now ;)

  Of course, nobody here the solution for you. :(

  Problem is that this model of laptop is not supported for Vista 64-bit. I don't really know what you can try. Maybe install driver designed for A300?

  I don't really know. You can use an external mouse with success?

• Y500 two-finger-tap touchpad not working not

  Hi I bought my Y500 a few happy days with her and there are in general. However, one day the two le deux-doigt-tap (par clic droit) sur le pave tactile - finger - tap (by right-clicking) on the touchpad stopped working. Here is a description.

  Everything else as far as I know, including the two fingers scrolling and the tap of a finger, etc. work well, but the tap two fingers stopped working even though it worked fine for a few days. I have a suspicious as to what caused it, but I'm not entirely sure. In any case, I think that it is probably a bug and probably software. One day I went into 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->"Scrolling"->"two fingers to scroll"->"enable cabotage. I played with the cabotage for awhile and soon off again because I don't really like it. However, that's when I noticed that my tap two fingers stopped working. I have double checked that 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->" by clicking on "->" click two fingers "is set on" secondary click (context menu, drag special) ", but the click two fingers still doesn't work, even after a reboot. I downloaded the latest driver (version 16.2.18.0) and it still doesn't work. I uninstalled the driver and installed it again and it still does not work. Now, I like to use the touchpad, but really hate to live without tap with two fingers for a right-click. Please help me with this, I thank you in anticipation.

  It seems to me a solution, but I don't know exactly why he has solved the problem. It seems that the problem might be that while the Synaptics touchpad device is a PS/2 device, it keeps software interference (of some sort) by being recognized as a SMB (System management bus) device. Which solved the problem for me was to go to 'device manager'-> 'system devices', locate "Synaptics SMB driver", and either disable it or remove it. The two-finger-tap touchpad must begin to work immediately.

• Aspire E1-571 touchpad not working not

  Dear Sir, iam using aspire E1-571 laptop.it is bought on last august.but currently this touchpad not working.iam using usb mouse.please solve my problem quickly.

  Have you tried to turn the touchpad with the function key?

  FN + F7 I think

  A symbol: