Touchpad on my Satellite C50-A-157 problem

Hi, I had some problems with the touchpad my * Toshiba Satellite C50-A-157 * portable.

I use windows 8, and I've had my laptop for a few weeks, but suddenly, all the vof
I can only use the touchpad and operate the cursor when I have one of the buttons of the mouse pressed.
I had to use the "Tab" key and the "arrows" to navigate through the menus and options.

The * F5 key does not work and I tried already to day/reinstall the device drivers. Troubleshooting does not seem to work either.

However, whenever I don't have the mouse button, and the sursor is not movning, when I move my finger up and down on the touch pad, it will sail through the vertical series of the closest options and the left edge of the screen.

For example, in windows 8 Start menu, the mouse will be immobile in the middle of the screen, but when I move my finger up and down on the mouse pad, seems to scroll the tiles on the left of the menu, highlighting each of them on the way upwards or downwards.

I realize that it is quite a long and boring post, so thanks for reading this day and any help/suggestions, you can give will be greatly appreciated, thank you.

It's really strange question. Try to roll back the OS to an earlier time before it started to happen just to see if problem will be solved. Post comments.

Tags: Toshiba

Similar Questions

  • Satellite C50-A-157 - cannot use the touchpad without maintaining the left button

    I know very little on my Satellite C50-A-157. Run on Windows 8. I'm main user/admin and all of a sudden I am unable to move the cursor of the mouse... only average, it seems, I beg, if I hold the botton left hand (at the bottom of the mouse pad) at the same time, it moves.

    But then high-lights everything.

    I tried pressing FN + F5, at the same time (nothing happens), even taken battery out back (once again does not solve issue) the arrow of the mouse/is just frozen on the page... This does not happen in my partners profile, (there is another user) the mouse seems to work fine...
    I thought it was the mouse pad, had used (as is the brilliant now), but this does not explain why it happens that under my profile/user, not his?

    If anyone can offer any help, very much appreciated... I only stumbled across the fact, it allows me to use (if I hold left button at the same time)
    Also tried the "sticky keys" shift x 5, even once it does nothing or to solve this problem.
    And entered the usinw of control panel Windows + X and distributed in troubleshooting, once again, not solved the problem.

    .. This does not happen in my partners profile, (there is another user) the mouse seems to work fine...

    Because the touchpad does not work using a different user profile, I guess that there must be only a software conflict.

    Usually you can activate or deactivate the touch pad by pressing F5 (or FN + F5), but have you tried this combination and that did not allow the touchpad...
    Then there where I bit you should simple uninstall the driver of the touchpad and after downloading the package of newer touchpad driver of the page of the Toshiba UE driver, unzip the and perform the new installation of the touchpad driver...

    Once the installation is complete, reboot the laptop...

    Good luck

  • Upgrade memory of satellite C50-A-157

    I am looking for the upgrade of memory and I need some advice. Please let me know if any of below works on my laptop?

    https://www.Amazon.co.UK/Corsair-CMS...ct_top?ie=UTF8

    https://www.Amazon.co.UK/HyperX-IMPA.../DP/B00KQCOV5C

    My laptop: Satellite C50-A-157

    Aloha,
    the revenge of CMSX16GX3M2A1600C10 Corsair 16 GB (2x8GB) DDR3 1600 Mhz CL10 passionate Notebook Memory Kit is probably compatible with your laptop if you have 2 slots for memory. Http://www.toshiba.co.uk/discontinue...ite-c50-a-157/ says here onley supports up to 16 GB. Kingston memory is a low voltage RAM is not compatible with your laptop. DDR3L - what means that which is low voltage

  • Satellite C50-A630 - start problem - cannot install OS Win

    TOSHIBA
    MODEL NAME: SATELLITE C50-A630
    P-N3520/4G/500G/15.6HD/DVD
    PART NO. PSCJGV-00400LAR
    SERIAL NUMBER 1E052899U
    CPU TYPE Intel (r) Pentium (r) CPU
    N3520
    THE 2.16 GHZ PROCESSOR SPEED
    Total memory 4096 MB
    System BIOS Version 1.10
    THIS Version 1.00

    I bought THE TOSHIBA MODEL NAME: SATELLITE C50-A630 without windows inside
    Now I am trying to install windows, but it has problem with starting.
    His boot not get FLASH DRIVE or CD ROM just showing, CHECKING THE MEDIA TWICE, then gives a message that there is no media device, please restart,

    Please help me on this problem

    Hello

    Do you have what system tried to install?

    The point is that Toshiba Satellite C50-A630 was equipped with the Intel Pentium processor * N3520 * belongs to the new * Intel Bay Trail * standard.

    It s a new technology that allows the use of systems capable of UEFI as Win 8 or 8.1 Win

    Failed to install systems that don t help UEFI mode.

  • Cannot get my Satellite C50-A-157 at startup

    Hi people I have a Toshiba satellite A-C50-157, just three weeks. It wouldn't connect to the internet last night, kept saying that it was unable to display the page. Then the cursor froze and the touchpad would not answer. I have attached the mouse and finally, he responded to that. Still wouldn't let me online so decided, I would like to do a system restore. He passed for centuries, and nothing seemed to be going, I had to go out so had to turn it off. Tried to get back in there today, but everything is the screen flashes between black and gray.

    Toshiba offices is closed, so I was wondering if someone can help out me? My knowledge is pretty basic, so any help would be appreciated!

    Hey cool. What did you do exactly?

  • Satellite C50-A-157 does not start a 1 TB HDD - media do not have

    Toshiba Satellite A-C50-157 - Media failed

    1 TB HARD drive is in good health, but the laptop no longer starts to him

    Help please

    New HARD drive is recognized in the BIOS settings?
    What do you mean with will start to him? Are you trying to install OS or what?

    Have you changed your BIOS settings - http://aps2.toshiba-tro.de/kb0/TSB2B03F30002R01.htm

  • Touchpad of my Satellite C50-A-19 t stopped working

    I didn't know what category it would go in... I'm sorry.

    I have a Toshiba satellite laptop and the mouse stopped working.

    _It has nothing to do with the function key (f5) the mouse turns off. _
    It stopped working yesterday.
    I can use the keyboard.

    My father noticed that by organizing in either the left or the right button, it moves, but it will not on its own. However when you try to move it vertically, it starts to scroll which he couldn't do before.

    Any idea on how to make it work?

    > I have a Toshiba satellite laptop
    Which one?

    > It has nothing to do with the function (f5) key that disables the mouse.
    If you have already tested if the touchpad isn't disabled?

    How about the external USB mouse? It work correctly?
    Have you tested the touchpad without connected USB mouse?

    > My father who noticed taking in either left or right button, it moves, but it will not on its own. However when you try to move it vertically, it starts to scroll which he couldn't do before.

    This looks like a function additional touchpad (as the gesture control, etc.)
    Here's a statement [how to change the settings of the Synaptics touchpad in Windows | http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm]

  • Satellite C50-A-157 Sandisk USB does not work in Recovery Media Centre

    I can't get Sandisk Cruzer USB to work in recovering from the media library. Have tried formatting but no luck.

    I read on another forum of Toshiba that Sandisk USB keys do not work and you need to use another brand.

    Anyone know if it's true?

    Thank you

    To be honest, I don't think that any USB Sandisk flash memory sticks don't work with Recovery Media Creator. But of course because of a problem of compatibility between the device and the software, it is possible that a USB flash memory stick would not be recognized.

    I have never known such problems with my Recovery Media Creator software.
    I could create a recovery media using two different USB sticks from two different manufacturers. One of them was a SanDisk flash memory stick.

  • Satellite C50-A0330 - keyboard problem

    When I press the F key on the system keyboard while I'm typing this message make a pop window with a question leave this page?

    When press 3 or R get passing same 3R by pressing C or V Gets CV.

    Please provide me the solution for this problem

    Hmm could you please check if the external USB keyboard would act in the same way as internal keyboard?

    In the case where the external keyboard would work properly, the issue could be related to keyboard internal malfunction.

  • Error BSOD Bad Pool Header - Satellite C50-A-157

    Hello

    I get a blue screen bad pool header error.

    It started after I updated some drivers, was one of the drivers does not work properly since, it's the IWD bus enumerator, it has a yellow exclamation point and this error, Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    I can't find a solution for this driver so I had to disable, I think that it is related to the bad pool header as I get it a lot more since the update. This often happens when I'm on the web, just from crashes and goes into the blue screen.

    Any help would be appreciated.

    Thank you.

    Hello

    Can you please tell us which laptop model you use, which are part of troubled hardware and drivers are updated.

    Please post some specific info. Your ad is fairly general.

  • 19 satellite C50-A-t - Touchpad does not

    Hello world
    I have a Satellite C50-A-19 t and I don't know why my touchpad don't respond often. This happens several times and is boring... How can I resolve this you problem?

    Thank you

    This should not be a touchpad issue.
    Test the same functionality as part of the external USB mouse.
    In many cases, the cursor would not respond because the system stressed.
    In the case of the background process stress and burden the CPU, the touchpad or mouse couldn't answer.

    But it's one of the possible reasons.

    Another reason for this problem could be the problem of the touchpad driver.
    This would require an update or the new installation of the touchpad driver.
    Usually the latest Synaptics driver is downloadable from the page of the Toshiba UE driver, but you might also try a newer version of Synaptics page:
    http://www.Synaptics.com/resources/drivers

  • Satellite C50-A569 - activation key Windows 8.1 problem

    I reinstall my windows 8.1 which came preinstalled on my Toshiba laptop. It will ask you an activation code for windows after installation. My Windows 8 come pre-activated, and I can't find my activation code. You can get me my activation code.

    Here is some information on my laptop:


    Satellite C50-A569

    Product code: PSCGNV - 00Y001AR

    Serial number: 2E161369S

    She was purchased by the Qatar.


    I hope you will reply quickly.

    Thank you.

    Hello

    According to specifications specification , you got your laptop with the preinstalled version of Win8.1.
    With other words, your laptop has been pre-installed with original recovery image designed for this model of laptop. Preinstalled recovery image should not be enabled.

    Recovery image is also saved on the HARD drive and it is possible for you to create bootable recovery media (backup recovery) that you can use for the installation of original recovery image.
    > I'll reinstall my windows 8.1 which came preinstalled on my Toshiba laptop.
    If I understand you right you try to use your laptop with the original recovery image again. Is this good?

    I really don't know what's the problem here, but after the first start, connect your laptop to the Internet and complete the installation. Preinstalled Windows must be activated automatically.

  • Display on Satellite C50-B919 problem

    Dear Sir / Madam

    I have a problem in the configuration of my screen, I have a 8.1 Windows as OS on my Toshiba Satellite C50 B919 and I downloaded the drivers several times on your site and it did not work.

    How can I solve this problem? I can t connect my laptop to an external display.

    Hi André

    As I see that you bought for laptop computer without an operating system preinstalled. I ve checked the download page of Toshiba for the Middle East, but, unfortunately the drivers are not available.

    What you can try is to install the drivers offered on the European download page.
    Here are few of them and you can try to install:
    Intel displays the version of the driver 10.18.10.3408
    Version of the display driver Intel 10.18.10.3412_4ID
    Version of the display driver Intel 10.18.10.3345_4ID

    Try to please and post comments.

  • Touchpad and sleep questions on Satellite C50-A-1DV

    I bought a Satellite C50-A-1DV for my wife and noted 2 significant 'features' that, to all purposes intention should be easily solved, but I'm damned if I can cure for her.

    1 the touchpad (at least, I assume it is the touchpad) seems incredibly sensitive. Supervised, another workspace (Windows 8) seem to open even without direct contact with the pad. It's really very annoying, but it's pretty much within the limits to be able to live with it.

    2nd machine is unexpected drops in a sleep/power saving mode. Now personally I have not met this when running through controls on it, but the pain in my ear tells me otherwise.

    Anyone else experienced this or better yet have a solution to this?

    > 1 the touchpad (at least, I assume it is the touchpad) seems incredibly sensitive. Supervised, another workspace (Windows 8) seem to open even without direct contact with the pad. It's really very annoying, but it's pretty much within the limits to be able to live with

    Changes to the touchpad can be applied very easily:
    Go to control panel-> mouse control
    Last tab device settings would offer you some additional options to enhance the functionality of the touchpad.

    Take a look at this Toshiba HowTo doc on the touchpad settings. It should be useful for you:
    [How do I change the settings of the Synaptics touchpad in Windows 8? | http://APS2.Toshiba-tro.de/KB0/HTD3101Z30000R01.htm]

    > the machine is down unexpectedly in a sleep/energy saving of 2nd mode. Now personally I have not met this when running through controls on it, but the pain in my ear tells me otherwise.

    Well, you could disable or change the settings of the unique power of the Panel-> power options.
    You will find the option for standby and hibernation

  • On the new Satellite C50-A-19U battery problem

    Hello

    A few days ago I bought a new notebook Satellite C50-A-19U.

    Everything works without problems, except when I unplug the power cable, the battery level goes from 100% to 50% both.

    If I try to charge the phone, battery load normally up to 50% and then spend 50% to 100%.

    Anyone facing this problem?

    Post edited by: tonybp

    I don't really know what may be the problem here. Try to use the battery until it will be completely empty and let it be fully charged again.

    Please watch carefully if the same happens again and send feedback.

Maybe you are looking for

  • I get the message to your mailbox is full!

    your mailbox is full... How can I make space inside?

  • Freeze in the computer

    Guys, I'm getting a lot of gel in my computer. I can't play games, watch YouTube videos properly. A program that allows to start 1 minute now hold 3 minutes. I know that it is now a problem of overheating or viruses. Please help me! What I did and af

  • Microsoft Home Publishing 2000 Premium

    I have Microsoft Home Publishing 2000 Premium program and the disc "Programs, drawings and Art" #2 has a crack in it.  Now I can't use one of the other disc 5 is possible I can't purchace the #2 disc?  I love this program of publishing and have been

  • 'Off' blackBerry smartphones appears next to the antenna icon where the bars are usually on 8330

    It seems that I somehow function phone off.  Although I turned the phone market by using the red button I suddenly the word 'off' in the upper left corner of the screen next to the icon of the antenna instead of the bars indicating signal strength. A

  • Need to change the font color

    Hi allI am a beginner to acrobat scripting.My requirement is I need to find more than 12 font size and change the color to black. Do not know how to start my coding.Help, please.Kind regardsK