Touchpad remote control AppleTV scrubs is no longer

Similar Questions

• Impossible to use the IR remote control after you install Touchpad

  I have a C40 that was used with the infrared remote control successfully for months. I recently installed a Touchpad plugging directly into the 2nd port eNet.  The software is underway at 6.2.0.  Immediately after that I have connected and started using the touchpad, it was noted that the unit no longer meets the IR remote.  The base of the camera flashes when ar buttons pressed on the IR distance indicating that the IR signal is received, but there is no response from the codec.  Is this a "feature"?  Can I use the remote and the touchpad?

  Hello

  Touch screen and remote control cannot work side by side. Once the touch screen is connected, it takes full control of the on-screen display, allowing no changes from the remote control. This is expected behavior.

  Hope that answers your question.

  Thank you

  Saint André
  Telepresence solutions group

• Satellite X 200-drivers Windows 7 for touchpad and remote control

  Going to be create drivers for touchpad (brilliant blue) and the remote control?

  > Going to be create the drivers for the touchpad (brilliant blue) and the remote control?
  I think so. If the Satellite X 200 will rely for Win7 Toshiba will provide all the necessary drivers.
  Unfortunately, we expect that Win7 will be officially available on the market.

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• Remote control on F25 no longer works

  I got my F - 25 1.5 years. We use it every day to watch and record TV in Media Center. Suddenly, the remote doesn't work. I replaced the batteries, disconnected & reconnected, and nothing changes. The red light on the remote control AND the receiver, both light up, but nothing happens.

  Please help me. I am at a total loss.
  Thank you in advance.

  Katy

  Hello

  I think that you need to uninstall the infrared receiver of the first device manager, and then restart the computer or scan for hardware changes. To do this, follow these steps:

  1. in Control Panel, double-click System, and then click the Hardware tab.

  2. click on device, click the infrared receiver Manager. The device is usually listed as Microsoft eHome Infrared Transceiver, but the name can vary depending on your configuration.

  3. in the Action menu, click on uninstall, and then click OK to uninstall the infrared receiver.

  4. in the Action menu, click Scan for hardware changes to reinstall the IR receiver.

  also try to remove the battery from the remote control for 2 minutes and put it back again

  Good luck

• long-lasting problems after windows scammersr had remote control of PC

  I got Asian male phone call to the effect that I had serious problems with a virus on my computer. He claimed to be the appeal on behalf of Microsoft Windows. Is not not in computer, I followed a number of directions to him which eventually led to him have the remote control of my computer. The number of callers evil disguised alarm of "oh my God" etc the alleged problems he has discovered and when the purpose of the payment was raised, I ended the call. The call lasted about 40 minutes, and he had the remote for about 5 minutes. It seemed to me that it was associated with a site named PC technocrat. My fear is now that he can have some future remote access or caused other problems that I have not yet thought.

  Unfortunately, once you give someone the remote control of your PC, they can do whatever they want.  There is no way for you to know what they did or did not.  You must assume the worst - they left behind software that allows them to take control of your system and/or take all the information they want it without your knowledge, and that they took any information they wanted while being connected.  Then contact the banks and other institutions in finaicial you do business with and take steps to protect your accounts and your credit cards.  Next would be to save only essential or element files and documents such as photos, music, etc and then destroy your computer and restore to factory new.

• Remote control no longer works

  I was wonderng if someone can help me...

  I have a Dell W3706MC 37 '' widescreen TV. The batteries seemed went into the remote control (the remote control flashes periodically blue), so I replaced the. Now, although the remote control seems OK (stops flashing), it will not work the TV... The TV works still manually - if the blue power light on TV now constantly flashing. Even wierder, the power light blinks when you press the remote control (if the remote control is get in touch with the TV), but the remote has no other effect on the TV...

  Does anyone have an idea what could be the problem - and how to fix...  (I tried unplugging the TV for a few minutes, but that made no difference)

  Thanks in advance.

  
  

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• Problem remote control Apple TV (not the App)

  Hello

  I have an Apple TV (3rd generation) and the remote no longer controls.  I have it odd and paired again, but still does not work.  I downloaded the Remote app, but that does not give me access settings, and that's what I have to do.  We changed provider Internet and the need to configure it with the new password, so he goes on the network... Any suggestions?

  TKS

  SACA

  When you say that the remote control does not work, to what it means? It is not recognized? It is not a click? Installed new battery?

  I was using the Remote with ATV 3 years app and it works beautifully. If it is coupled?

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• 4th gen Siri remote control has stopped working

  I had my 4th Gen Apple TV since November 2015. Last week noted that the TV shows and movies are glitching but if I do a reboot on the apple TV everything works fine again and have to do it every day.

  Today the Apple TV remote was working fine all day then when a finished film went to for use and there was flashing reaction flights when I pressed one of the buttons. At first, thinking it was maybe needing a charge on the charger. A few hours later I returned to use the remote and it still doesn't work do not at all. I went into the Apple TV menu using a remote old money I thought that I would check how much fresh had the remote and I went for the remote controls and devices > BlueTooth remote control is more is listed and the dial connection was but would not connect to the remote control?

  I tried to reboot that fixed the glitching to see if maybe he would take the remote, but still nothing. Does anyone else have this problem?

  Try to re-twinning of Siri remote:http://help.apple.com/appletv/#/atvbc9953e63

• Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

  Remote control stop scrolling left and right while he needed video first put in pause and scroll any help?

  It was an update designed by tvOS 9.2 to the user of the address which have been accidentally scouring...

  http://www.CultofMac.com/420160/scrub-through-video-on-Apple-TV-in-TVos-9-2/

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• Remote control does not respond with Toshiba 24D3434DB

  I recently bought a smart TV 24D3434D.

  I was incapable of analysis for all channels when I bought because I didn't have an aerial socket in the room in which I used it, but I was able to use the tv feature smart until suddenly the TV displays a screen telling me that no channel was available and no longer responds to the remote control.

  I returned to the store and the tv started to react to the remote control again and they were able to search the channels it. When I House and rekindled it remote control not responding until I tried again the next day after I left it unplugged over night.

  In the morning, I found that the remote was working again until I plugged the tv in an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  Anyone know why this is happening or what I can do to fix this?

  Thank you.

  > In the morning, I found that the remote was working again until I plugged the tv into an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  What adapter do you mean exactly?

  The remote control works correctly if the TV is connected directly to the power grid?

  To be honest, it's the first time I encounter this problem.
  Perhaps some sort of light affect the functionality of the remote control, it is maybe s really a TV or remote hardware problem.

  I guess to see what s twist exactly you should test with a different remote or another TV and same remote control.