Touchpad utilitiy Panel would not light on XP - Satellite A300D

Similar Questions

• In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist

  In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist, he said only "Connect burner and restart". I have already burned a music CD "RW", why he said burner "connect"? The burner is already installed? I tried the "Device Manager" thing wasn't working, thank you for your help. "

  Hello

  1. have you installed any third-party DVD burning software on the computer?
  2. could you give us the exact error message?

  Method 1.
  If you have installed a third-party software CD burning remove it and then try to burn the disc and check. Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Method 2.
  a. Click Start and type cmd into the search bar and press ENTER.
  b. in the type guest following command press ENTER.
     WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.

  Method 3.

  You can re-create the database of Windows Media Player and see if that fixes the problem.

  Stage i: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  Stage II: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  I hope this helps.

• ff22 has two high bars of the page, who act in the same way at the same time. In addition, the BACK button would not light on many web pages. This means that I cann

  Problem #1.

  First the top bar has a logo of firefox in the upper left corner and the words "Ask a Question/Mozilla Support-Mozilla Firefox" are on the right side of the logo. The first bar of the high a minimize, overlap and close the buttons at the top right. When I click on the logo, a short menu unfolds, has a choice as ' restore "..." "" loved ones ".

  The second bar from the top has the word "Firefox" in the upper left corner with an arrow down beside him. They resemble contrast white letters on an orange background of a huge button. When I click on it, displays a menu double glazing. He has a lot of choice as the new tab, new window private... Favorites, history, download... out. The second top bar has also minimize overlap and close the buttons at the top right, too. There are 7 Word securities "file, editing, display, history, bookmarks, tools and help" under this huge button orange at the top left. The logos and the address bar is less than 7 words.

  I don't have 2 best bars. They worry too much about property screen.

  Problem #2
  The BACK button isn't light upward, and may not work on many web pages.

  Thank you

  Looks like it is an application or a Firefox extension that causes this problem.

  You can start Firefox in safe mode to identify the problems: http://mzl.la/MwuO4X

  In addition, this article may be of interest to you: http://mzl.la/NjT73w

  --

  In addition, you can try to do a reset software Firefox, if you are not able to solve this problem: http://mzl.la/MnSTZB

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• Windows XP would not start on the Satellite A105-4324

  Hello everyone.
  I have a Satellite A105-4324
  Yesterday my laptop locked up all of a sudden. When I went to turn it back on it just kept restarting. It would allow me to start it in safe mode. I got a blue screen with a message that says "stop: C0000221 {bad image checksum}.
  The gdi32.dll image is possibly corrupt. The header checksum does not match the checksum calculated. »
  I have read online and discovered that I needed to replace the file GDi32.dll in Windows XP. Because I only have the recovery disk, I tried to restore the system without changing the HD partitions. After the recovery of the 2nd run drive, I got the message saying that it was the creation of the file of the CRC. And then I got an error message saying there was an error in recovery and turn off the computer. Now when I turn on the computer, the Windows XP screen comes on briefly and then the screen goes black. It does nothing else.
  I try to understand what I am doing wrong. If necessary I will bring the computer back to out of the box, but I need the files off the laptop first before doing this. I can't lose the files. Is it possible to fix this or is it possible to move the files on my desktop, even if now, the laptop computer does not have Windows XP? Is it possible to simply borrow from someone of another real Windows XP disk and load like that without losing files?
  Any help would be greatly appreciated. Thank you.

  Hello

  Are you sure that need file GDi32.dll in Windows XP?

  I searched a bit and found this document from Microsoft:
  http://support.Microsoft.com/kb/326687

  According to this MS document this problem may occur if there is a corrupted file in the folder in which Windows is installed and this file is not replaced during installation or one or more of the RAM modules that are installed in your laptop is faulty, or the RAM configuration is incompatible.

  So I recommend simply formatting (!) the disk HARD whole, erase all the available partitions and try to reinstall the operating system!
  You said you tried to install the operating system but without formatting the HARD drive. I think that the whole HARD drive must be formatted!

  The restore CD contains all the necessary files and drivers.
  But as you know the disk HARD formatting will erase all the files stored on the HARD drive. Sorry, but I don t see is possible to save the data.
  Hmm, maybe you can save the data by removing the HARD drive and connect via external USB HDD controller to another computer.

  If installation will not work, I guess that memory module is damaged.
  In this case, you should check the simple modules and if necessary you need to replace!

  Do you think that the guarantee is valid? If Yes, you must contact the ASP in your country because all replacements to be free!

  Good luck

• DVD player would not properly work on Satellite series

  After I installed the SP1 of Vista, I had to solve a number of problems, but the main one is currently the hard drive is working but without acknowledging any contents of the disc.

  I had to remove the upper & lower filters in the registry as shown in the windows forum to get the player to appear and kick again, but what i've got.

  Any help please?

  Bill

  Hello Bill

  SP1 is not yet supported and every strange question may be the result of a Microsoft patch included in SP1. Either roll you back OS to an earlier time using System Restore to see if the problem persists without SP1 or wait to see if Toshiba or Microsoft has a fix for this.

• HP printer Panel will not be upward, it will print. but NO Scan or Fax

  I have an HP 6500 A more. The front panel will not light.  It will only print, no fax or scan.  Why?

  It is possible that the printer has internal firmware hung up and is not responding or that there is a problem of internal with display electrical connection.

  Have you tried a hard reset of the printer?

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Unit back in

  Thus, try to plug the device into a direct socket instead of a surge protector.  This is to ensure that the unit becomes the right tension works as expected.

  If the hard reset does not address the issue, then try the steps outlined in the document, found here, to troubleshoot a non-responsive printer.  I hope this helps.

• Folio builder Panel will not be upgraded

  I'm on CS6 and I downloaded and installed 2.05.1. My folio builder Panel would not work unless I have done this and still now says that I have to do an upgrade! I need to prepare this folio iTunes make a date deadline. Help, please!

  Follow this link:

  http://helpx.Adobe.com/Creative-Suite/KB/disable-auto-updates-Application-Manager.html

• Keys inductive Y510-Touchpad and touch does not

  Hello world

  I am at a loss with my situation. Keyboard of my laptop Lenovo Y510, inductive keys/multi-media keys to touching, the volume and multi-media-Equalizer spend everything stopped working. I'm able to use a keyboard and an external USB mouse, and as of about an hour there was the keyboard works again. The inductive keys have power and the light up when pressed but do nothing.

  I've uninstalled and reinstalled the drivers for the touchpad. I know not what pilot control keys inductive so have not tried this option. I've heard say that installing SP1 (I'm running Vista 32 bit) can solve this problem, but have not tried. I have also heard that after use the cables that connect the mouse and the keyboard to the motherboard may squirm let go, but I don't know how to get it and check.

  I passed my warranty and would like to resolve this problem. I have built desktop computers and made repairs, but laptops are a new area for me. Need all the help I can get.

  More software Lenovo Energy Management usually controls these keys. Install it and you should be good to go!

• 11 flow: Flow 11 touchpad gestures works is not in Windows 10.

  I upgraded my Stream 11-10 Windows and now the gestures on the touchpad do not work. I can click on something and that works but the scroll and hitting swiping does not work.

  I've updated the drivers.

  Do the drivers simply not support this, or is there something I can do to get things to work.

  did you try going to the control panel - mouse and touchpad and change settings, (I assume you did)

  I had a problem with the touchpad gestures too. The synaptics driver delivered with windows on my hp Pavilion 10 would not save the settings I wanted. In my case, I wanted to get rid of the gestures.  But it would not keep my favorite settings after a reboot. I got the old hp support synaptics driver and it works better for me. The only problem is that windows maintains the new driver. To resolve this problem, you must change the device settings to not automatically download the drivers.

  Here's what worked for me to stop the new driver of constantly updating:

  https://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_update/how-to-block-automatic-reinstall-of-a-driver-or/bff07224-4ce2-4B42-AB29-68c3a305d730?auth=1

• S2740Lb - does not light

  * What is the serial number of 20-digit alphanumeric monitor?  CN-0P7D0G-74261-314-08GL
  * What is the revision number (A00, A01, etc.)?  A01

  * Brief description of the problem monitor?

  This monitor was purchased directly from Dell and has been used for a while (~ 6 months) before being stored and then moved to a new location.  When I tried to implement the system at the new location, the monitor did not turn on.  When I plug the power adapter in the power outlet, the green light turns on, but when I plug the power connector in the light on the AC adapter monitor turns off.  The monitor will power any.  I tried a second adapter and also used 3 different cords from wall to adapter that I had, but the behavior is the same - so quite clear the monitor is the question.

  Are there common issues that would cause the screen itself to short-circuit the power input like that?  I'm debating taking the back cover of the monitor to see if the connection plate where the monitor connections might have moved and is causing the problem?  Any other suggestions?

  Thank you very much.

   

  Manufactured 01/04/13. Is still under warranty through 04/01/16. Enter the service tag number here to check the status of the guarantee. Right, green adaptor LED must remain lit when plugged into the monitor. Remove the rear panel would void any remaining warranty. I would simply get the Exchange monitor if the warranty is still good.
  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open the "monitor warranty and replacement instructions.

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• Satellite C660-2EL off - would not turn back on this time

  I hope this is the right place to put this. I have a Toshiba Satellite C660-2EL and last night it shut down without warning, nothing. He would not go back at all, he just kind of this noise as if it were die a death slow and had the green light etc., but then off back again once, I noticed that my battery had come to lose (which sometimes happens) so I put back and tried again, nothing.

  I also tried with my charger and everything in place, again this time that there is an orange light flashing, no green light and a-type noise that squeaks really horrible. Come on now, this morning, I decided to try it all again and it works? * Anyone know what this could be? *

  I have insurance and I think just take it to them because of this and see what they think, as it's the second time it happened, although the first time, he never turned back, and Toshiba, it had some water damage and was so my fault and I had to send it to the normal setting so it can be fixed.

  Thank you all!

  On this virtual path, it is not easy to discuss these issues. Generally better you can do is to contact the nearest Toshiba service provider, ask for help and try to clarify this with the technicians.

  If you have a valid insurance try to ask for help and get free fixed.

  Sorry, but what else to say about it.