TouchSmart 15-D020nr: 15 D020nr touchsmart card mother replacerment
I currently have a HP touchsmart 15-D020nr laptop. Failure of the motherboard and I need to get a new motherboard. The system is designed with an AMD chip on it. I can replace it with a motherboard that supports Intel chip. The configuration appears mto is the same.
Currently, it is the system configuration, I have:
Here is the link to the motherboard, I have in mind:
Thank you
John
Email address: [personal information]
Hi @JohnM66,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your laptop HP TouchSmart 15 - d020nr and interest in replacing motherboards. Thank you for all the information on your system. Very useful.
It shows me that your motherboard is 747148-501 as shows in your Service Manual. This motherboard for models with your A4-5000 AMD processors and graphics UMA.
You can order Parts HPparts. I hope this helps.
Please let me know how it goes.
Thank you.
Tags: Notebooks
Similar Questions
-
Drivers Windows 7 x 64 for the card mother Memphis-M
Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.
Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.
I need:
Simple communication controller PCI Chipset, USB 3.0.
Thank you and waiting for a response.
Hello:
You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
Chip set:
Comms Simple PCI:
USB 3:
-
Replacement card mother Qosmio G10
After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:
1. second HARD drive internal no more seen.
2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
3. always on cooling fan.Upgrade the motherboard consisted of:
1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
2. loading the CD-ROM TCN0000006 official update tool.
3. no recovery BIOS or EC/KBC.Any idea?
I m wondering how you did update the information in the DMI?
As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
So maybe his bad card mother -
Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09
What started it stops early on with the error:
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
-Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03I have the option to continue with F! that works.
I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.
Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
The error indicates this device 01 because of controller 09 conflict
Have you tested the RAM?Recommend doing this! You can use a tool like Memtest or similar.
Maybe it isn't that a Ram problem and new modules could solve your problem. -
H8-1223: card mother HP Angélique Label of ports and diagram
Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case. The problem is the case connectors are labeled, but aren't the ports on the motherboard. I need to have the labels on the ports and connectors of my Board of Directors. The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset. I need information on the place where to connect or if these connectors at all. I'll try to send some photos if I can understand how this Bluetooth to my cell phone.
On the left is the cornerstone of HP mother. I wanted you to see the ports that are on the map. PSWD HP LPC. The line is the Corsair Obsidian Series 350 d connectors. How can I connect these? Or do I really need them?
-
HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6
So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.
To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.
If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.
Thanks to all who take the time to read/answer
Drew
At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.
You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.
EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.
Cards with BIOS double EVGA
http://www.EVGA.com/articles/00767/
I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.
Sapphire video card specifications
http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng
What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.
I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.
-
What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge
You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!
@ Big_Dave
Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;
Intel Core i3-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i3-3xxx (Ivy Bridge) Dual Core 456 Intel Core i5-3xxxT (Ivy Bridge) Dual Core 256 Intel Core i5-3xxxT (Ivy Bridge) Quad Core 152 Intel Core i5-3xxxS (Ivy Bridge) Quad Core 756 Intel Core i5-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxx (Ivy Bridge) Quad Core 676 Intel Core i7-3xxxK (Ivy Bridge) Quad Core 676 Intel Core i3-2xxx (Sandy Bridge) Dual Core 756 Intel Core i3-2xxxT (Sandy Bridge) Dual Core 256 Intel Core i5-2xxx (Sandy Bridge) Quad Core 95W Intel Core i7-2xxx (Sandy Bridge) Quad Core 95W Dual-core Intel Pentium G6xx (Sandy Bridge) 756 Dual-core Intel Pentium G6xxT (Sandy Bridge) 256 Dual-core Intel Pentium G8xx (Sandy Bridge) 756 and supported memory;
Dual channel memory architecture
Four DIMM DDR3 240-pin connectorsSupports DIMM DDR3 modules
PC3-10600 (1333 MHz)
PC3-12800 (1600 MHz)
Memory non - ECC, unbuffered
Supports 1 GB, 2 GB and 4 GB DIMM
Supports up to 4 GB on 32-bit systems
Supports up to 16 GB on 64 - bit systems
Frank
-
card mother Memphis-b: b of memphis
I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.
Please try the stitching as shown in the graphic below;
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
Pavilion Elite 300Z: identification of card mother sata socket
My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?
The plugs are numbered from 1 to 6. The boot order will follow in succession.
I found a reference. Can you check the color and number?
Dark blue - disc 1
White - disc 2
Light blue - Disc 3
Yellow - disc 4
Red - disc 5
Black - disc 6
-
Card mother MS-7613 Iona: Corsair XMS 3 2 X 4 GB DDR3 1333 mhz compatible?
Hi all.
I have a simple question: is this compatible with the standard ram card mother MS-7613?
http://www.Corsair.com/en/CMX8GX3M2A1333C9
How did you select the Corsair ram? I can't find a link suggesting its compatibility with your exact computer. I found three different modules 4 GB here who are recdommended. Found an example of it on Amazon.
-
I get a Toshiba satellite 1900-102 with a default card mother work
Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?
Or does anyone know where to find that?
Hi Erdl,
I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!
In my opinion, you will have more luck at ebay or used equipment selling home pages!
Sorry
Campino -
Questions card mother ThinkStation D20
Hi I was wondering the card mother D20 does support Geforce SLI? Ordinary GPU not of Quadros?
Also I was wondering what is the shape of the motherboard? Is it E - ATX or ATX?
Welcome to the forum
SLI is only supported by Quadro in workstations. It is a limitation by NVidia, not Lenovo. Very few applications workstation (CAD/DCC/oil/gas/etc) supports either benefit from SLI anyway so diminishes the need of this.
Map of the D20 system is a layout owner but closer to E - ATX. You need to change your D20 chassis if you are planning a Board from the aftermarket. The spacers will be the biggest obstacle with wiring being a close second.
-
Question about the HP 2AFB hand/card mother.
I'm looking to level/add in a graphics card in my PC for games purposes. I was wondering if a GeForce GTX 710 would be able to be added to this motherboard? Any answer would be useful!
Hello
Your machine has appeared shortly for a special promotion, it is similar to the following machine located on different countries with the SAME montherboard
http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03806462
Figure 1: The card mother Tenby-U
-
Need drivers chipset card mother AmethystM (MSI-7184), for Vista 64 bit OS
I'm looking for the proper chipset drivers, or compatible drivers, for the card mother MSI-7184. The chipset is ATI RS482 & ATI SB400. Specifically, I'm looking for the following drivers:
PCI express filter driver - currently using Catalyst 8.3 ATI PCI Express (3GIO) Filter Driver
Configuration AMD address map - currently using the standard driver microsoft
HyperTransport (MC) Configuration of the Trace Mode - currently using the standard driver from microsoft and DRAM AMD
AMD HyperTransport Configuration - currently using the standard driver microsoft
Configuration of various AMD - currently using the standard driver microsoft
ATI i/o Communications Processor LPC Controller - currently using the standard driver microsoft
ATI i/o Communications Processor PCI Bus Controller - currently using the standard driver microsoft
Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft
Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft
Controller ATI i/o Communications Processor USB 2.0 EHCI - currently using the standard driver microsoft
Controller IDE ATA standard - currently using microsoft standard driver - it's supposed to be SATA I think that my HD is connected to it and its SATA
Standard ATA IDE Controller - currently using the standard driver microsoft
Bridge standard CPU PCI - currently using the standard microsoft driver - what is supposed to be ISA instead of the processor?
PCI and standard PCI to PCI Bridge - currently using the standard driver microsoft
I'm looking for drivers because my CPU usage is constantly at 45-60% usage. My processor is an AMD Athlon 64 X 2 4200 +. Devices and drivers of Thease are what Vista has recognized and loaded. I don't think that is correct. Any help on this would be greatly appreciated.
SeanOK, I found the appropriate drivers!
ATI drivers:
Drivers of North Bridge: catalyst 8-12_vista32-64_sb_72277
SMBus, & IDE drivers: catalyst 8-12_vista32-64_72274 - run the program so it extracted all files in c:/ATI do get out. Then manually install two IDE controllers and SMBus drivers by using Device Manager.
Also, I solved the problem with the hardware interupts. The on-board USB controller and suport Legacy interfere with the video card. To fix this go into the BIOS and under Advanced, disable Legacy support. Then in Device Manager disable all three usb controllers. These controllers have been disabled as soon as the missing of interruptions. I'll get a PCI usb so I can still have USB ports.
Message edited by shfire2000 on 01/26/2009 21:51 -
Formosa card mother IPMMB-F: motherboard of Formosa
I bought HP Formosa card mother IPMMB-FM 685772 - 002 but NO driver CD. Please tell me where I can download the driver from the motherboard. Thank you!
Some drivers for the motherboard are to HP following self service driver download web document.
http://support.HP.com/us-en/drivers/selfservice/HP-envy-H8-desktop-PC-series/5295996/model/5297197
The motherboard is used in some of the h8, h9-1300, h9-1400, 700-000 Phoenix and Phoenix 800 - 000 series desktop PCs. check each for Windows 10 pilots.
http://support.HP.com/us-en/product/HP-envy-H8-desktop-PC-series/5295996/model/5297197/product-info
Maybe you are looking for
-
HP Pavilion g6: Hp Pavilion g6 windows 8 disabled system
After 3 incorrect attempts, 93158477 was the number given
-
Two tasks that share the same resource in sequence
I'm the current exception "the specified resource is reserved.". I understand that you can not run two tasks that share the same resource at the same time. However, is it true that you can not run two tasks that share the same resource, one right aft
-
Allocation of for loop processor timed in RT
Hi all I work in a real-time system. In my code I am using two timed loops for this I want to configure two processors for these two loops. So please let me know somebody that how I can configure it. Is it simply to give the number at the entrance of
-
HP flash drive with operating system Win98 v255w
can I use a flashdrive USB HP's v255w on a Win98 OS machine? Driver support is required? I'm trying to get some files a former office of Win98 my laptop running XP and would like to make using a USB thumb drive. Cannot get the Win98 machine to recogn
-
Add text to the subject line of message
Hello I am trying to add a menuitem to the menu change Email which should add a text at the beginning of the subject line. I could add a menuitem to Email edit menu and was able to view the subject of the message using the provided RIM sample. Howev