TouchSmart 600-1055-Message of disk error hard hd521-2w

Similar Questions

• Win 8 on Touchsmart 600-1055?

  My Touchsmart 600-1055 (exactly 3 years from dec / 2013) has experienced a hard drive failure. I bought a new hard drive but have no restore disc and HP don't use them more for this model.

  So: Did anyone see a problem with the installation of Windows 8 on this old system? I understand that it may not work because of drivers... but that's it or throw the PC, which is always a great PC for some uses.

  I appreciate the answers.

  Hello

  Windows 7 is still the best at this stage, but if you want to switch to Windows 8, it's your choice and you will need to find one or two drivers for your computer. A lot of friends in this forum will help you.

  Kind regards.

• disk error hard laptop computer hp Pavilion dv6

  I get three disk errors hard when I do drive hard main self-test: hard drive 1 303 fast and complete 1 305 hard drive and hard drive 1 smart 301. Also, I can't open windows normally, it will just go straight to the repair start and even that does not work! I don't have the chance to back up my files and I don't want to lose them. Help, please!
  Thank you

  The hard drive has failed and needs to be replaced. Once you have replaced the HARD drive you will need to perform the HP system recovery so that Windows and hardware drivers are reinstalled correctly.

• What is ' disk error hard master 3d "problem

  When I start my computer, it always tell me "3d master hard disk error, press F2 to resume." sometimes I need to reboot several times to start, sometimes I can't start. What is the problem with my computer? Please help me, thank you!

  I would like to run CHKDSK to check the hard disk for errors.  Click Start-> computer.  Click the C: drive, and then click Properties.  Click the Tools tab, and then click check now.  Click on the Scan for bad sectors recovery attempt, then click Start and click OK.  Be aware that it can take up to several hours depending on the size of the hard drive.

  I hope this helps.  Good luck.

• B440 M2 SLES boot fom SAN 11sp3 fails with "disk error hard gruber" on NetApp FAS3240 lun

  Hello, gurus

  I'm doing POC for client trying to deploy SAP.  Try B440M2 starting VIC1280 2 x directly from 3240 NetApp via FC.

  Prepared 450 GB lun 0 on FAS3240, he mapped OK. In the political profile of UCS for created B440M2 service startup to boot from lun 0.

  SP3 GUI SLES 4 SAP 11 installation ISO found thin installation, lun 0 path very well, but, when the system goes to the reboot disc it does not start

  with a few «grub error hard drive» 2.2.1(d) UCSM.

  He works the config? Or, get sth to make B440 SLES LUN 0 with OS just install.

  Rgds, Yuri

  When your installation detects the lun and installs, okay, that means, this FC zoning, and lun mapping/masking is ok.

  Boot failure: something might be wrong with your boot strategy?

  Can you please send your startup strategy? and the vhba of your PC?

  BTW.

  -is - this classic SAP or HANA?

  -have you checked

  Installation of Linux on a LUN SAN Bootable

  This section describes how to install Red Hat Enterprise Linux (RHEL) or SUSE Linux Enterprise Server (SLES) on a SAN LUN logical disk or a RAID using Cisco UCS Manager GUI and the KVM Console.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/OS-install-gu...

• Disk error hard satellite L50-B-235

  Laptop stopped recognizing Bluetooth, so restarted, but when you start it says something to check a disk and repair the hard disk, which then laptop crashed before completing. Would not start once again, it is:
  1 past age on the toshiba screen then tell no boot device
  2 load the login screen, then past ages in front welcome saying windows preparation and loading a temporary profile. When he made a mistake shows saying Windows detected a hard disk problem. Back up your files to prevent loss of information and then ask the computer manufacturer to determine if you need to repair or replace the disk. It will then crash after 10 to 30 minutes and the blue screen with my critical_process_died error, which restarts always shows described in 1.

  I have Windows (updated 8) 10 and the laptop is less a year. I've tried various searches on google and fixes, including:
  Update of system drive where Windows is is locked
  Check disk either from the start menu or the command prompt in the temporary profile
  Changed the boot order and then back again
  Several reboots
  Open to the top of the unit and removed, then replaced the hard drive

  Nothing worked, I do not have the recovery media and not really means for the moment. This could be a real hard disk problem (it heats up during boot ups) which would mean it needs to be replaced? If Yes is that these can be purchased with Windows installed on it?

  While I update to windows 10 I have a probem with the use of the hard drive because he moved to the use of 100% and the laptop just crashed.

  I search in the Admin Panel and I discovered that I have a service called host system: local system (private network). I tanslate it Spanish which is the language was my laptop.

  Also I have a problem whit the video card because systems always use the graphic istead intel video card (AMD one). I tried to solve this problem in istalling the graphic control of AMD program, but the program doesent work better because the use of the hard drive is always more 100% and the experience of the computer laptop full length.

• disk error hard dv6t, failure of hard drive not

  I am currently working for my intermittent problems of girlfriends with his laptop HP DV6T 3100.  The unit occasionally freezes and crashes, and then retrieves and returns to normal.  Occasionally of the boots to a hard drive error.  When it does not read the hard disk, the BIOS test pass.

  For a brief period he not tell the reader at all, but after I pulled the drive and put it in an external enclosure, another machine was able to read and to test the hard drive, which showed no signs of problems.  Smart function and the test was well outside, and I was able to start another machine out of the outer casing, which had none of the symptoms.

  I reconnect the SATA cable, he taped down as Ive read that this model has some problems holding the SATA cable in.  I also replaced the cable a few days ago and the machine is still issues regularly do not start, or when it does, gel on what anyone who accesses the hard drive because then more a minute or two, IE: Windows Live Mail, showing recently used documents in the office, or download files from Chrome.

  From what I can tell, it seems to be a problem with the hard drive on the Board controller, but I'm not familiar with how HP defines the unit upwards, or with Windows in general, as I'm an Apple guy.  Is there something else that reveal ask this question, because I don't think it's the hard drive, as it works perfectly out of the machine.  No details on this issue would be appreciated, as so far been relatively useless HP support, claiming that it is certainly a hard drive problem.

  Hello romanaz1987.  I understand that you encounter some problems with the hard drive in your friend DV6T.

  I share your diagnosis - which seems to be a problem with the hard disk controller.  The reason why I believe that it is only your steps of troubleshooting narrowed down the issue well enough.  The hard drive is known for work that you are able to use it in an external enclosure without problem.  In addition, the next thing I would try personally would have been reinstalling/replacing the SATA cable and you did both.  So, that leaves either the motherboard or controller hard drive as the culprit.  Unfortunately there is no way that I know to further diagnose the issue without taking the laptop to a technician.

  How long have you tried using the hard drive in the enclosure?  Given that the problem is intermittent, it may be useful to use the hard drive in the enclosure for an extended period of time.  It'll still exclude strange intermittent problems with the drive.

  I suggest take this laptop to a local technician, if she is no longer under warranty (you can check here).  A technician will be able to more practical tests that don't translate well on the forums.  If you are still in warranty, then you should definitely, contact HP support and let them know about the problem.  If you are in the USA / Canada, the number is 1-800-474-6836.  However, if you are in another part of the world, you need to visit HP's Support around the world to find contact information for your country.

  I'm sorry you have encountered this problem, but if you have any questions feel free to ask.  Also, I hope you have a nice evening!

• Disk error hard 3F0 - but the hard drive is readable from another computer

  I have a HP pavilion DV7-3060us running Windows 7 home 64-bit

  This morning, he decided to not start and gives me an error 3F0 complain about a missing boot disk.

  I have a disc that is cloned several months ago that I put there and that he can use at the moment.

  I put the 'wrong' drive in an external enclosure and checked that I can see from another computer.

  I tried to run a chkdsk on it that 'fixed' some mistakes, but I still get the error 3F0.

  I would really like to fix broken files which do not allow the system starts.

  Any suggestions on how to do it?

  Thanks in advance (and I will credit good answers)

  I don't know what I'm doing, but take a look at this article

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• Blue screen with this message. STOP: error hard c0000221\system root\system32\ntdll.dll

  no internet connection, without starting, windows will not open, etc. safe mode goes to the blue screen with the message above.

  Usually a terminal problem, IE HD / memory problem

  http://pcsupport.about.com/od/fixtheproblem/a/ntdlldll.htm

• 600-1055: replacement fan

  I have a HP Touchsmart 600-1055 NY539AA need to replace fans.  Where can I find these?  I looked online and can find a lot of fans, but none that appear to be a direct replacement.  Someone at - it a good source?  Thanks in advance!

  Hello

  Please bookmark the following link which shows all the parts available for your machine:

  http://PartSurfer.HP.com/search.aspx?SearchText=NY539AA

  Looks like you need a fan (part number 537510-001). You can buy from the link above (check the square to the left of the part number). Not available on Amazon now:

  https://www.Amazon.ca/HP-537510-001-blower-M5/DP/B0085J39RE

  https://www.Amazon.es/sparepart-HP-blower-M5-537510-001/DP/B0085J39RE

  Kind regards.

• SMART hard disk error message

  I have a Pavilion dv4-2045dx and I got the "SMART hard disk error" message since last night after my daughter felt my cell phone and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do.

  Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Hello

  GeneiRene wrote:

  I got this error since last night after my daughter felt my laptop and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do. Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Sorry to bring bad news, but... If you have a SMART hard disk error then the drive is toast. There is no way around that.

  The INTELLIGENT notification system gives you a report that the BIOS sees when it queries the hard disk during the Power On Self Test, he always does before the start in the Windows operating system.

  I hope that you have created a set of HP recovery cd. If you did, then you still have your operating system intact. If you do not, you can buy a replacement of HP recovery disk. They are inexpensive.

  Best regards

  ERICO

• Tecra S4 - 125 shows built-in HARD disk errors

  I bought the Toshiba Tecra S4 - 125 and I have problem with built-in HARD drive.
  New SATA HDD does not work.
  The built-in "Disk ERROR" message appears from time to time and system stops the HARD drive boot and startup is very slow.
  HARD is not detected in the BIOS disk settings.

  What is the problem here?

  Thank you...
  Abdel

  Hello Abdel

  If I understand you right that you bought it used a Tecra S4. Right?
  This error message the first day or what?

  Is that what you traded a HDD with a new one?
  Sorry for these questions but your ad is a little confusing.

• Qosmio G15R - built by HARD disk error

  Hello

  I get an error message that says "built in hdd error" when starting my laptop. The laptop has 2 HARD drives. A 40GB and the other 60 GB.

  I tried both in the slot to HDD1 and I still get the same message. I was able to use the recovery disk on the 60 GB HARD drive and was able to boot the laptop. He worked for an hour then I got the same message from disk again. Everything is plugged in fine.

  Can anyone help?
  Thank you.

  Hello!

  Have you already tried to install Windows on the 40 GB as suggested boarder?
  And have you checked the 40 GB or 60 GB using Drive Fitness Test?

  If Drive Fitness Test doesn't indicate a mistake I guess that the HARD disk controller is defective. This controller is welded/fixed on the motherboard and so you have to swap the motherboard together.
  It's a little tricky. Of course you can try it yourself, but an authorized service provider can do for you.

  Good bye

• Portege R600 built-in HARD disk error

  My Portege R600 works very well until today when he came with the built-in "Disk error" message when I turned on it. He then lists the following:

  Intel Boot Agent GE v1.3.24

  PXE - E61: Media test failure, check cable of
  PXE - MOF: exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready...

  I'm leaving on a trip to South America and do not have access to the system disks.

  Can someone help with this problem?

  Hello

  If you get an error of HARD drive and after that the message PXE boot, it seems that your internal HARD drive is not recognized more...

  Have you already checked the BIOS if the HARD drive is it recognized?
  Otherwise I think you need to replace the HARD drive :(

• SMART hard disk error after replacing HD

  Hello!

  I SO hope that this someboidy is able to help me.

  I'm NOT a novice but I am confused.

  I replaced with the same model HD HD CQ58 provided with COMPAQ because the old HD was shot - how it happened escapes me.

  Anyhoo, after screwing a new HD I wanted to put OS on it, but I get the following error just after pressing set button / stop:

  SMART disk error

  INTELLIGENT drive control has detected an imminent failure. So no los data, please backup the content immediately and run the system diagnostics hard drive.

  Hard drive 1 (301)

  F2 System Diagnostics

  ENTER - Continues start

  For more information, please visit: www.hp.com/go/techcenter/startup

  I will return the LINK later.

  First of all, I pushed ENTER. What has emerged is:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  F2 System Diagnostics

  For more information, please visit: www.hp.com/go/techcenter/startup

  I pressed F2 and this is what happens:

  I get the diagnostics Menu.

  Version 1.6.0.0 - BIOS

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  Memory test

  Check the hard disk

  Language

  Output

  I pressed Hard Drive Test is the "Quick Check" and that is the message I get:

  INTELLIGENT control: NOT AVAILABLE

  DST short: NOT AVAILABLE

  ==============================

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  I tried the LINK, it does not exist.

  I also went in the Boot Options in the BIOS to boot from a USB and put the USB HD in the first place.

  When I restart it does not recognize a USB key. I tried Windows 8 and UBUNTU which ususally works on all the machines I've fixed so far.

  No chance whatsoever.

  As I mentioned earlier:

  I'm puzzled.

  I have no recovery CD and cannot make one because I'm not running Win8 on any of my PC.

  Thus, any suggestions?

  Help, please

  Thanks in advance

  Henry of Kai

  First of all:

  Thank you all very much for taking the time and you answer!

  And now, for what happened after I did all what has been proposed:

  Nothing.

  The message remained the same.

  Still no hard drive (even if it was new)

  Then I took a hard drive to work with Win7 on it from another machine, put it in the Compaq and... nothing.

  I tried the USB with Win8 (NTFS with Rufus) does not.

  I don't know why, I tried again, but when I used the same USB with UBUNTU Live - 14.04. on that I had taken or tried before... He recognized at startup.

  Weird hard drive wiped completely since it was not recognized by the BIOS (one with Win7 on it... data paths but I had backup ).

  So, now I'm running the faithful Tahr on the Compaq and it works fine.

  I will try to put the original Win8 on it, but the system doesn't seem like more since USB NTFS NTFS are not recongised at startup.

  Well Anyhoo, I got the machine to work.

  Would have been nice to know what was wrong with him to solve future problems, but at least I had to register in this forum

  So I could bore you guys with questions in the future.

  Take care

  Kai