TouchSmart 600-1315xt will turn off by itself

Similar Questions

• C50-A-1HF satellite will turn off by itself after 2 seconds

  Hello

  the laptop turns off by itself after 2 seconds when I turn it on. This happens if I shutted down or choosed hibernate before (Win8.1).

  This means hibernation is not at all useable.

  The next time I turn it on it works quite normal! Sleep mode works as well. Standby mode it is ready for use after open them both as a repetitive. Fascinating!

  I looked on all the settings of the BIOS, but I found nothing what could be the reason for this behavior.

  Perhaps there is a correlation with another strange behavior. The battery will not be charged over 80%. I do not use the green mode. I have to turn off the laptop and remove the battery completely for a minute. After inserting and booting Win8.1 what it charges again at 100%.

  The discharge time is approximately 3.5 hours. Otherwise, the battery is ok.

  But after the next discharge up to 10% charge that up to 80% more.

  These two effects are not normal. But I don't think (or better, I hope) that there is a material defect.

  Is there a chance does not post the laptop to a repair service?

  Best regards

  Onurbi

  Hey man it are so strange problems and it's not easy to say what to do. All you can do is to install the original recovery image and test with the settings once more, of course without changing anything or install updates or additional applications.

  If possible to do this and test it for a while.
  > Is there a chance does not post the laptop to a repair service?
  As you probably know your possibilities to do something about this are very limited and if there is permanent problem I think you should contact the closest service Toshiba and clarify all of this.
  You have the new laptop model and it should work properly. If you are not happy and there are service problems Toshiba should take are about it and help you.

• Toshiba 40L7335D will turn off by itself after several hours of use

  My Toshiba 40L7335D TV periodically turns off by itself!
  Bought a few days, everything else works perfectly during the day, but after several hours of use of the TV is off!

  Is a problem that someone else has or knows?

  Please see the user manual * page 74 *.
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7335-4050-English.PDF

  _Energy saving Settings_
  + The TV automatically turns off (standby) after 4 hours, if you do not use not the TV, either from the remote or the TV Control Panel. +

  and

  _No signal Power Down_
  + TV turns off automatically after 15 minutes when no signal is detected.

• System Restore will turn off by itself.

  It happened, but rarely and without apparent cause or sequelae. Larely, it was repetitive, once again no reason apparent, but apparently interconnected with the sudden disappearance of HP Quickplay, also by itself. My two scans, MSE and MBAM didn't pick up malware.

  I have since restored to an even better version PS. My PC works fine without apparent probs.

  I checked SR seconds ago and it is powered and creating RP of as usual.  But an individual isolation of SR is very troubling. How prevent it from happening again?

  Hi Coolnewyorker,

  Thanks for posting in the Microsoft Community. I understand that the system restore will automatically close on the windows vista computer.
   
  I apologize for the inconvenience and no need to worry I'll be more than happy to help you.
   
  1. What antivirus application do you use on the computer?
  2. did you of recent changes to the computer before this problem?
   
  Follow the steps and check if that helps.
   
  Method 1
  Check the status of the shadow copy volume service. If it is, then try to restart the VSS service and check.
  (a) click Start, type services.msc in the start search.
  (b) search for the shadow copy Volume service.
  (c) make a right click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.
  (d) if it is stopped, select start or restart. Make sure that the service is started and set as automatic.
  (e) click on apply and OK, if you make changes.
   
  
  Method 2
  You can also try temporarily disabling computer security software and check if it makes a difference. If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  
  Method 3
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
  Let us know the status of the issue and if you need help I'll be more than happy to help you.

• Equium A100 - 02L - backlighting will turn off by itself

  Hi people, I have another strange problem on a Toshiba laptop and I hope someone can tell me where to find a solution.

  The laptop turns on ok and post ok, screen is fully informed and nice n bright. Immediately after the POST the back light turns off, leaving me with an almost unreadable screen.

  First thought was obviously backlight inverter, the light was turned off in the bios also screen. It has been replaced twice with the same question.
  Next thought was the screen, also replaced with the same result.
  The only thing I can think of now would be sensor hibernation or the motherboard itself. I do not see the sensor cover on this model and I don't want to think about whether the motherboard until everything else is excluded.

  Any advice would be greatly received, thanks in advance.

  Hello

  Have you tried an external monitor to your laptop computer? It would be interesting to know what is happening there. Maybe the same thing happens here or not.
  Check this box!

  Normally I would also say that it s ups the FL, but you have already replaced it. By the way: you did it replace yourself and have you taken a Toshiba original spare part or another?

  A friend also replaced me the FL inverter but with Toshiba no spare part. He worked only a few weeks

• What to do when iPhone 6 will turn off by itself?

  I've had my iPhone since June of 2015 6. I have always been careful enough with it and have never broken broken screen or caused dents in the aluminum body. At the beginning of January 2016 (this year), I had not had a single case on my iPhone and he got up on the table and accidentally drop playing with it. When I picked up back, the screen completely faded and discolored unusual and then turns off completely. The screen went black and regardless of how many times I tried to turn it on, restart it or to load, it still lights. I went to the Sprint store two days after using watch it. The person helping me to told me it would be about a two-hour wait. I come back to the left, after an hour and 45 minutes, and the employee told me that they could not find what the problem and gave me a replacement. The replacement has acted since with it restarts itself when not in use. For example, if I use my iPhone for 30 minutes straight, it would be turned off after that I locked and would not come until after about 20 minutes of me trying to restart it. A red screen might flash just before going off as well. Unfortunately, this happens at least once every day. I tried to go back to the Sprint store, and told me to try the Apple Store. I have not tried to make an appointment and go for the moment. Are there solutions to the problem that I am experiencing that I can do myself or is that called to replace another?

  First of all, you should have taken the first device at the Apple Store, because they are the ones who run the service under warranty, and the unit was still under warranty. Your replacement the Sprint device, it is unclear what kind of device you have received from Sprint, and that can not be under warranty. I recommend that you make an appointment at the Genius Bar to the nearest Apple Store to have this unit looked at and whether she has any guarantee in this regard. It could be a device that Sprint provided you may not have any warranty on this topic and Sprint messed up you the 6 month warranty on your iPhone. The flash screen you describe looks like a hardware problem.

• Satellite A30 554 will turn off by itself.

  My Satellite A30 554 for a reason any began to turn off on its own after working for a while or even during startup. This happens both in Win XP and SUSE 10.0. I used the CD recovery to format the entire hard drive and reinstall the system and even during this computer just turned off, so it's sort of a problem material I think. Suddenly, this thing started to happen as early as last week. I have also had problems with before starting - just get a black screen instead of system startup, but usually remove the battery and put the rank or start once helped. Computer two years ago, and I think the warranty is over. What may be the cause of the problem and what can I do now to solve?

  Hello

  Sometimes the notebooks closed because of overheating problems. There are a few reasons why units overheat. One of the reasons is the Sales cooling fans. Fans don property t work because of dust inside the laptop. In this case, I recommend to check the ventilation openings and clean it. You can use the vacuum to suck up dust.

• Record will turn off by itself

  I have a Sansa Clip + 4 GB and like it a lot.  He plays very well and when he records it superbly.

  However, when I want to record a class, I start recording, put it in reverse so that the microphone is pointing towards the sound source.

  I come back later and find the turned entire drive, and when I go to play the record, it's a few minutes of time, while the class was an hour of time.

  I'm doing something wrong?

  You can sleep under tension, so it turns off after a certain period of time?

  You have enough free space (memory) to record for the hour? These things recorded in WAV format, so they use a lot of memory for recording space.

• BlackBerry Smartphones BB9780 will turn off by itself in time

  Hi, my BB9780 turns off automatically at random whenever I take a call, click on an icon... I have to then remove the battery and restart, which takes a very good time. Please send me a solution.

  Details of phone below.

  Carrier - Bharti Airtel

  BlackBerry 9780
  Smartphone (3G, Wi - Fi)
  6.0 bundle 863 (v6.0.0.285, platform 6.5.0.54)
  Band 3G 1,2,5,6
  The kernel v3.8.6.5 encryption
  Brand version: 1.0.99.496Q
  The micro Edition configuration: CLDC-1. 1
  Micro Edition profile: MIDP - 2.1
  Micro Edition JTWI Version: 1.0
  Micro Edition Media Version: 1.1
  Micro Edition PIM Version: 1.0
  Micro Edition file Version: 1.0
  Edition micro Bluetooth Version: 1.1
  Micro Edition location Version: 1.0.1
  Micro Edition Security and Trust Services (APDU) Version: 1.0
  WLAN Version: 4.2.1.40
  www.BlackBerry.com
  Copyright © 1997-2010
  Research In Motion Limited.
  All rights reserved.

  Finally solved the problem. Passed under my mobile network setting 2g & 3g to only 2g as iam not using 3g. Now, everything seems to work fine. Phone stops only when the battery is low.

  Thank you.
  Ganesh

• Why Satellite 200cds will turn off by itself?

  After 25 minutes to do not touch, weather active or not, it just shuts down and the power led flashes red (all other LEDs are off). He's not coming by pressing the power button then.

  I don't think that there is a power management, because it is so old, but I can't be sure, I have found no manual of Toshiba or Google sites. Can anyone tell what the power blinks red led?

  Hello

  It's a FAIRLY OLD machine so I wonder why you´re always use it. Isn´t a little nostalgic, it? ;)

  Regarding your problem: this 'extinction' appears exactly 25 minutes? It would be useful to know whether the machine really has some powermanagment then you should be able to change settings in the bios.

  If you know how to get to the bios, then it try it. Unfortunately, I Don t know how to get the bios on this machine (perhaps by pressing ESC, DEL or F2... I'm not sure).

  See you soon

• Satellite A200-1AH will turn off by itself

  My computer closes itself sometimes without any reason! (and then when I try to open it a few seconds later it closes!)
  Can someone help me what is the problem? =(

  Thank you...

  Hello

  Have you read this forum and other discussions concerning similar behavior for laptop?
  There is enough discussion on these issues, and in most cases, it s related to the temperature inside the laptop.

  This can happen if don t cooling modules run with maximum efficiency and the vents are clogged with dust.
  You can try to remove the dust of ventilation with the can of compressed air.
  This spray can be purchased from various online retailers.

  welcome them

• Satellite A200 will turn off by itself continuously

  Hello

  I have a problem with my laptop because it stops itself constantly, having used internet for 30 minutes, or immediately after launching a major program like photoshop or autocad or a game.

  I spotted that it also runs very hot fast in a few minutes could be related? What could be the problem?

  Hi mate.

  Quest - what? I think I know what could cause this problem.
  I think that it s associated with high temperature. The CPU and the GPU create a lot of heat while running a powerful software (app chart, games, etc.).
  Eventually, the cooling modules can cool the CPU because of dust.

  Remove dust from the cooling fans and the grids using a jet of compressed air.
  This tool is very useful and can be bought from different merchants online.

  Ciao

• T440s Windows 7 taking two fingers will turn off by itself

  I have a Thinkpad T440s I bought a coupleof months ago. My problem is that the two finger press on in the Synaptics Control Panel is disabling itself. In this case completely at random. In this case I have to open the Synaptics Control Panel and re - activate. I went weeks without this occurring to have sometimes happen four or five times a day. I reinstalled the drivers Lenovo synaptics and this still happens. Is there any solutions to this? It is extremely frustrating to have to stop working at random intervals for all of this box.

  Any help much appreciated.

  System Specs:

  Windows 7 Enterprise 64-bit

  Intel Core i7-4600 2.1 GHz 2.7 GHz

  8 GB RAM

  McAfee 4.8.0.1500

  Information of the touchpad:

  SMS Version: SMS 12.0
  Synaptics ClickPad V1.0 on the SMB Port
  Driver version: 18.0.7.40
  FW Version: 1.0
  Interface: SMB

  

  The only solution I've found is a workaround.

  Download "two_finger-scroll. In the settings, clear the scroll and only leave the option which allows two finger tap. The value that it runs when windows starts. It is quite annoying to have to run a background program to solve this problem, but I guess that's how Lenovo rolls these days.

  https://code.Google.com/p/two-finger-scroll/

• Why my streaming media guard function turn off by itself?

  First of all, my firewall is controlled by Norton 360. But they say that's not their product that does, so I come to you for the answer. streaming media feature that enables or disables the media streaming in the network and sharing continues to fade, after I reset or when I sometimes restart my system or it comes will turn off by itself! How can I fix it? All my computers on this network, and sometimes, they all will turn off the sharing of multimedia files. I do not understand what is the cause or how to solve this problem, I ran Microsoft fixit to try to fix it without help, I contacted Norton without help. This is really frustrating to have to move forward and backward to enable multimedia networking file sharing and sharing.

  Hello

  This problem can be caused if the reader Windows media sharing service network has been disabled on your computer.

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2 have what Microsoft Fix It you tried?

  Follow the steps below.

  Method 1:

  Check and make sure that the network of Windows media sharing service player is running on the computer.

  (a) click Start, click run, typeservices.msc in the Open text box, and then click OK.

  (b) in the Services (Local) list, right-click theWindows media player network sharing, and then click Properties.

  (c) to ensure that the service is started and the startup type is set onautomatic.

  For reference:

  Change media settings in Windows Media Player streaming

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player

  Method 2:

  Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 3:

  Try to disable and enable Media Player and check.

  Step 1: Turn off Windows Media Player:

  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.

  Step 2: Enable the Windows Media Player:

  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF