TouchSmart 610 1150y: No Audio output device is installed after the system recovery

I recently experienced an issue that forced me to do a system recovery. I upgraded Windows 10 months passed without problem from 7. After saving, I did the recovery. The Beats Audio System will not work now and the system indicates device output Installed in no..

I tried to download drivers without impact. I also uninstalled the audio controller (IDT High Definition Audio CODEC) via Device Manager and rebooted him the system. Doing so resulted in a warning on the unit triangle. When I try to download software updates for it, it starts to download the driver, and then sends an idicating error message that a driver has been found but the device does not work. The audio worked perfectly until I ran the recovery, so it seems not to be a hardware failure.

Can you suggest a way to solve this problem or to diagnose the problem?  Thanks for any help you can provide!

Mark

Finally! I found a solution! A Google search for a Codec IDT pilot lost in Windows 10 randomly suggested another thread here on the HP Forum. After several suggestions, is affected:

1. Select IDT High Definition Audio CODEC on Device Manager.

2. Select the driver tab.

3. click on Update Driver... button.

4. Select-> Browse my computer for driver software.

5. Select-> let me collect a list of drivers for devices on my computer.

6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

Displays warning message, but the answer Yes.

7. Windows has updated your driver software.

Key is step 6.

Perfect! Worked like a champ!  Problem solved... just took me two weeks to find.

Tags: HP Desktops

Similar Questions

  • "No Audio output device is installed" after installing Windows 7

    • I installed my windows 7 64-bit today (previously used 7 ultimate, which is the first operating system, I used on this computer because it is fairly new) and after installing some things, trying to get internet work etc. I know that my sound is not working. There is a small speaker symbol with a small red circle with a white cross on it that says "no Audio output device is installed." When I go over it. Troubleshooting comes up with nothing. I tried searching forums but the suggestions I've found is came up with nothing. I tried to go into Device Manager, re-installing drivers there and display hidden devices. I have also shown disabled/disconnected devices in the menu "playback devices". I use headphones instead of speakers (because I do not have all the speakers) and while I got ultimate they worked only when it is connected to the rear. My friend computer, which helped me to set up my computer says that it was a problem with the ultimate place of my computer, do not know if this is related but thought better include it anyway. Your help is much appreciated, thank you in advance.

    I have no sound Windows 7 either. I just upgraded from XP Home to Windows 7 Home Premium 32 bit on a Virgin Media freedom Netbook. Everything except playing the sounds works perfectly.

    I checked in the Device Manager. An audio device high definition is installed. There is a recording device installed also. However, no midi playback is available.

    I tried an update and uninstalled and reinstalled automatically. No joy.

    I understand that Microsoft GS Wavetable Synth V1.1.  is a software-only device for playback. It is not a hardware driver. I know that it is present on the netbook because Tuneup 2010 detected it as peripheral to read. However Windows 7 has not detected. Is there a Windows 7 compatible driver for this? If not, is a coming soon?

    PS I've restored temporarily XP from an Acronis backup image. Sound worked perfectly as before, so I know there is no hardware problems

    You will need to keep the control working drivers for the audio device. Win 7 will not play sounds without a.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • No audio output device is installed on the Satellite U300

    Dear Sir.

    I bought this computer new laptop, when I start windows for the first time, there is no Audio output device installed. So I use the recovery of product to install the new system, but also not something, I download the driver of Toshiba but also no noise website.

    This is the Description of the error:

    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

    Signature of the problem:
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: hdaudio\func_01 & ven_10ec & dev_0260
    Configure the class GUID: {4d36e96c-e325-11ce-bfc1-08002be10318}
    The PnP problem code: 0000000-a
    Driver name: RTKVHDA.sys
    Driver version: 6.0.1.5473
    Driver date: 28/08/2007
    OS version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033

    Can you help me with this you problem.
    My system: Satellite U300 - Windows Vista 32.

    Thank you and waiting for your support.
    Osama katilo

    Hello Osama

    You bought your laptop at the Canada too?

  • Message "no Audio output device is installed" after changing graphics card

    Hello

    Thanks in advance for your help. I have a desktop pavilion, model No. KZ754AA. I just got a new graphics card installed, and as has been done, the above message appears in my "speaker" icon. devices and when I click on playback devices are NVIDIA hdmi output, however, it is said also they are not connected but I know that the cable is properly connected. I used to have installed Realtek I think, but that has now disappeared. I tried d/l of HP drivers, but it still did not work. Help, please. Thank you

    Hello:

    The solution is simple, but obscure.

    So, I'm happy that you came here before making a lot of troubleshooting that most of us would try unless we knew that the answer is simple.

    Why it happened...

    Your PC think you have installed not only a video card, but also a sound card, because it has built-in HDMI sound card.

    Thus, he dutifully automatically disabled the integrated audio system as it disabled the embedded video.

    Restart the computer and press the F10 key at the beginning of the HP welcome screen to access the BIOS.

    Looking for an embedded audio setting normally in the device setup menu.

    You will find it the value auto or off.

    Change the setting to "Enabled". Save the setting it by hitting the F10 key and again when you go out to save settings and exit.

    When you restart in Windows, you should now have your new built-in audio system and when you plug an HDMI cable from your video to your TV card, you should then get the HDMI audio.

    Paul

  • No Audio output device is installed... need more suggestions I already tried the solutions proposed by the Help menu.

    I get the message "no Audio output device is installed" with the little thing red x in the lower right corner of my computer screen. I looked up problems and common solutions.
    I uninstalled the device drivers in the menu equipment and also in the menu programs and features, after this, I restarted my computer before reinstalling.
    I did it too, but instead of reainstalling manually, I plugged my audio in a different speaker and let the computer to reinstall the driver by itself.
    I restarted the computer, the system restored the computer, put it to sleep, awake it save, close and let rest before restarting it.
    I checked the BIOS menu and changed the sound is activated instead of auto and tried uninstalling and reinstalling my drivers with this option, but the small x is still there.
    When I go into my control panel Device Manager and open the sound video and game controllers, I see my Realtek High definition audio. I open it to properties and it says it's working properly... then why my sound is not working? I've also updated the drivers and downloaded specifically on the realtek site, but no difference was filed.

    The sound is working again. I went camping for 2 days and came back, and it worked. It did NOT work once again before I left, he was dead. It sounds terrible, it of quiet and fades quieter and the but it works.

    None of the suggestions given here did something to help my problem. The proposed update does not work on my computer, I couldn't even download. I'll probably install a new sound card, but I would have liked your comments on this suggestion since I asked if this might be the problem several times. I'm annoyed that there was no way real and say what my problem is that after I answered engineers none of them responded to additional feedback I had given.

  • No Audio output device is installed, the Code 10 messages after reinstalling the drivers

    I try not to cry on computer problems, but this one really has me in tears.  NEED HELP from the COMPUTER GURUS: PC with Vista Home Premium SP1, Toshiba Satellite U305-S5077, Realtek High Definition Audio V. 6.0.1.5473 is the most recent update audio driver.
    I started to receive messages "No Audio output device is installed", but the sound is always back to restart. At work this morning - now it doesn't. Also The Sound, video and game controllers tab disappeared from the list of device completely Manager so the Realtek device showed is more upward.  : O
    A ran a diagnosis of Toshiba.  Next to his it read: No.
    And I went through the control panel and found 'Add the material legacy' reinstalled the Realtek driver. Now it says it is installed but you can't download the software updates. "This device cannot start - Code 10" is the message.
    Been working on it since 10 this morning, trying different things on different techniques for one, without success... until now.
    Help?

    Hello

    I suggest you follow the link and check.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    I also suggest to run the system restore date when it was working fine.

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  • My computer lost it's sound: "no audio output device is installed".

    My computer lost it's sound twice today because he has "no audio output device is installed". The first time, it fixed it's self after that I tried a few things and now that I tried those things again and waited a lot longer so I did the first time there is still no sound, please help (P.s. I'm using windows 7 and it's a laptop)

    Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • No audio output device is installed

    audio does not work. When I take the pointer to the audio symbol in the taskbar, it reads "no audio output device is installed". pls help me solve this problem

    You upgrade to Windows 10 or was your system shipped with it?  If you can provide information about the system, I will be able to help you.

    In general, if you went you could look for drivers updated on www.hp.com/go/support in support and drivers to see if a new sound driver is available.

  • WANTED m6 that no audio output device is installed

    Hi, I was looking at a CD on my m6 DESIRE last night and it worked fine.  Today, I have the speaker with a red icon in the lower right corner of the screen and when hovering over it says "no audio output device is installed".  I tried to uninstall the device driver, but that didn't fix it there.

    The driver for device "IDT High Definition Audio Codec" under sound, video and game in Device Manager controllers also has a yellow exclamation point.  When I uninstall and reboot, sometimes just with the yellow mark again.  If I try to upgrade the driver, I get an error message "Windows found driver software for your device, but has encountered an error trying to install it."  A device attached to the system does not work.

    Help...

    Installation of this driver fixed the problem: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = US & swItem = ob-109687-1 & jumpid = reg_r1002_usen_c-001_title_r0002

  • Satellite T135-S1305 - no audio output device is installed

    Recently my laptop make some loud beep sound,

    The first time I just restart and it was OK but on the last time I restart and it also stopped but now the speaker near the clock symbol is signed with X and there is no sound, "no audio output device is installed".

    What can be? What should I do?

    THX.

    Hello

    Have you tried to install the audio driver?
    For the most part, there is a solution!

    Satellite T135-S1305 is a series of laptop Toshiba us.
    The driver can be found here:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    The Conexant audio driver installation should help you.
    Here is also a nice youtube video, but rather the Sigmatel driver you must use the Conexant driver
    http://www.YouTube.com/watch?v=9lZzBDkpWkk

  • Satellite U300-152 - no audio output device is installed

    The sounds are works well when I do update windows, update antivirus and updated some software like adobe air and adobe shockwave but when I open the laptop the next morning, there is a red cross marked in the speaker icon on the lower right of the laptop and it says : "no audio output device is installed".

    I couldn't find the sound and game controller in Device Manager so I'm frustrated. Its been 3 days now, I use the laptop without noise.

    Can you please help me in this matter?

    My laptop is Toshiba Satellite U300-152
    Windows 7 Ultimate but not pre-installed (Vista Home has been the pre-installed)

    I tried to download the latest audio driver from realtek high defintion, but its still does not. Tried several restarts, System Restore, disable antivirus but does not yet.

    I don't know what can be the problem but the fact is that updates Windows update offers some drivers and, in general, you should not install their Mr. with other words, you should only use the drivers from Toshiba.

    What can you do now? Have you tried to reduce the OS to an earlier time (before installing updates) and check the functionality?

    One last thing. Software driver Sound should start with Windows, then please check MSCONFIG > startup if the sound software is listed and enabled it.

  • Satellite T130 - 11 H - NO Audio output device is installed

    I brought this new * Toshiba T130 - 11 H Satellite * (Windows7 / x 64) last week and at first, it was fine...

    Although I now have the speaker icon formidable with a RED CROSS in the lower right of the screen!
    It's become such a pain now - ive never had a problem with the sound with one of the laptops ive had.
    The message error is always 'no Audio output device is installed."

    I have tried everything - system restore, reinstall everything, download different drivers... Pray!
    When going to the Control Panel/Device Manager / sound, video and game controllers - I do not see the:

    Intel(r) High Definition Audio HDMI

    I remember when I got it I got an another "HD Audio Device" in this category - it is the one which has totally gone now and is quite important what I do:

    Please PLEASE please can someone help!
    Is it a hardware failure?
    Is there something I need to download?
    Is there something special I need to

    Will be grateful for any comments. Thank you so so so much to read :)

    Hello

    Go to the Device Manager and in order to choose the hidden devices.
    Now you should see all the devices that are available on this system.

    Now go to the sound, video and game controllers and remove the Intel(r) High Definition Audio HDMI, audio Conexant high definition Smart, etc.

    In system devices, remove the Microsoft UAA Bus driver for high definition.

    Now, restart the laptop.

    After the new operating system reboot Windows should recognize all devices again.
    Check this box!

    If this does not download the Conexant audio driver and reinstall

  • "No Audio output device is installed" on Portege M600

    Hi all

    I had this problem. Today in the afternoon, I was working with my M600 while listening to music. Suddenly, there's like a voice of vibrations... as "zzzz" voice. I was surprissed and decided to cut my music player (I use winamp) and continued complete my work. But, whenever I did by clicking on, this noise appeared with 'click' sound. So, I decided to turn off the PC.

    But now, I surprised because when I turn on my PC, there is "No Audio output device is installed" msg with the sign of the Red Cross on my speakers. I do not anything for the sound before. I have not installed anything. I have day my anti-virus, but that's all.
    This is not the first time happened. I had - a little - this problems twice but it was because I had windows update and I solved it by restoring the system.

    I did system restore, but it still won't work. I really need a help, since sound is so important to me!

    Have idea what had happened and how to handle this?

    Thank you in advance.

    Putri

    Have you tried to install a new sound card driver?
    You can find this driver on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com

    Of course, it could also be a hardware problem with your motherboard and/or the sound chip but try first to update the driver.

    The sounds you describe could also be a HARD drive problem.
    Look in the event viewer for errors.

  • Satellite U300 - no audio output device is installed - Vista

    I suffer from the ubiquitous error "no Audio output device is installed".

    -Go to control panel does not help, none of the controllers of games or sound devices are displayed
    -I am perfectly to date on service packs for Vista
    -J' reinstalled the driver

    Is there anything else I should try?

    Hi don

    Just one thing: is your laptop comes with Vista preinstalled?
    Sounds back works with factory settings?

  • Satellite L300D-243 - no audio output device is installed

    Hello

    I look for a similar problem in the forum but have not found anything that's been resolved.
    I'll try to explain how my problem came.

    My sound is fine until when a few days ago I tried to lower the volume and then all of a sudden it froze.
    Came a message that his unit has stopped working.
    I restarted the laptop, but it has not started at all, nothing on the screen, just the fan runs at slow speed. I figured it by removing one of the plates of ram and then with the possible one began almost success except he was not an indication of a sound, just the message "no audio output device is installed", and an 'x' on the taskbar icon sound.

    In Device Manager it is not anything related to an audio device High Definition Audio Controller except under the menu system devices.

    So what do you think, is this a hardware or no problem and is it fixable.
    Hope someone can give me an answer.

    Thanks in advance!

    Have you read this thread:
    https://Forum.Toshiba.EU/showthread.php?82746

    Open the Device Manager.
    Then expand the sound, video and game controllers, click on the Realtek High definition Audio choose: turn OFF, then turn ON.

    If you can not find Realtek HD audio device (this is the sound card), so I recommend you click on view and choose 'show hidden devices '. Perhaps the sound card appears in the list...

    In addition, visit the Realtek driver page and download and install the latest Realtek HD audio driver.

    Hope that it could solve the problem

Maybe you are looking for

  • Portege R700 - sound only in Windows Media Player

    I have a R700 with the RealTec sound when you use Windows media player, but not when you try to listen in flash, video, or audio system PC. Can anyone help?

  • HP Officejet Pro 8620: printing from iPhone 6

    I just installed an update to my i-phone 6 - ios 10.0.2 and can no longer print.  First of all, I received a message that the printer is paused.  Now, I get a message that the printer is busy.  I can print from my laptop.  I closed my printer, reset

  • Satellite U200-115 fail to start

    Suddenly, our old Satellite of 2 year won't start.Power supply is OKI have a 'product' recovery CD, but this seems to destroy all data and programs.I've never had a boot diskI am running (working) Windows XP Any advice welcome.

  • Problems with the CQ61-412nr

    I recently bought a laptop CQ61-412nr. I went down to XP Professional using the guide on this forum, but I encountered some problems: 1. the graphics driver will not install. I used the tools of modder (although I am not sure that I've used them corr

  • ThinkStation S30 has problems with SSD MX100

    I installed a MX100 Crucial 256 GB SSD in my S30 machines running Windows 8.1. The BIOS seems to recognize the MX100 and I was able to do a new install of Windows 8.1 which seems to work OK. However, the Crucial software Executive Storage fails to fi