tracing of dynamic data but the diagrams showing the previous acquired data too

Hi, I'm developing a curve of voltage signal at the same time as it is acquired by the computer of the amplifier to locking SR830. I used a XY trace and placed inside the loop, where the data are acquired.

Please find the attached VI.

Cory K wrote:

Altenbach says:

The express VI 'built the xy graph' has an entry "reset?" Wire a real in order to reset the internal data. In your particular case, do a '= 0' on the final iteration of the Interior for the loop and thread it reset entry.

Now I'm confused. He does not want to keep the previous data or not?
He made it seem like it's getting only 1 point in the chart, but he wants to keep all the data in the chart

Sorry, my post was incomplete. You must double-click the express VI 'build xy graph' and uncheck'erase data on each call.  Easy enough?

Whenever you want to start over, thread a real for the reset entry to clear the history.

Tags: NI Software

Similar Questions

  • Bought an ipad at a reseller on ebay but the previous owner of the ipad has not removed its link to ID apple for ipad. How can I remove this link to create my own link ID apple now?

    Hi all

    I'm looking for emergency one-handed helpig on this:

    Bought an ipad at a reseller on ebay but the previous owner of the ipad has not removed its link to ID apple for ipad.

    What should I do to remove this link and create my own link to apple to my account alle ID now?

    Bright ideas?

    Thanks in advance.

    BR,

    Bodo

    Sorry, but the only option is to return the iPad.

  • I need to remove my camera but the previous owner does not exist

    Hi I have an ipad that has not been deleted correctly, and the previous owner is not available for me how to remove this ipad for my son can use it x

    Sorry, but there is no way t go around blocking activation. Contact the previous owner in the contrary case, your device is useless brick.

  • ePrint, claimed printer need unclaiming but the previous user is unknown

    Hello

    I hope someone is able to provide some advice/help on how to make a printer, already claimed, not claimed for eprinting? The previous user has left the company, and I have the printer now...

    Thanks in advance for your help

    Hi, if you remove the front panel display web services printer it will make printers inactive email address and you can then re-enable web services to generate a new certificate claim code (email address). Let me know the model of the printer if you have problems with this.

    Best

  • Dynamic action on the region

    Hello

    Request Express 4.1.0.00.32

    I have a report region on a page that is conditionaly displayed depending on the value of an element of page Pn_ITEM = "HIDE".

    I have dynamic stock running on the page that fill a collection and update the report without the need to submit the page. However, I need to show the report somehow when the collection contains at least one of the members present.

    I tried the following:

    1st real action running pl/sql that adds a record / member of a collection, then a 2nd action sets the value to a page Pn_ITEM = true 'SHOW' action item and a 3rd that should show the region based on the value of the real action 2.

    My collection has an added member. The value 'SHOW' is applied to my article on Pn_ITEM page by the dynamic action but the region of report I want now displayed is not displayed. Obviously if the page is submitted, the report will now be shown however I can't send the page at this stage that's why I need to do this dynamicaly or through javascript and on the application process.

    Any ideas how to get my region report to display once the collection has at least one member without submitting the page?

    Thanks in advance.

    Remove the requirement for the view from the region. You don't want this here since it completely stops rendering region if the condition is not fullfilled to the render time. You want that he made, but not displayed.

    Add css to the region (inline, class):

    style="display: none;"
    

    Add real action that will do a refresh on your area (component - refresh, select your report as an affected item region).

    Now, either:
    Add a real action of type run javascript. Since you can not put conditions on the real actions, we will test the condition in javascript.
    Choose one:

    if($v("Pn_ITEM")=='SHOW'){
    //if you want to target the region to be shown by an ID (static id?)
    $("#region_id").show();
    };
    
    if($v("Pn_ITEM")=='SHOW'){
    //if the triggering element would be the region to be shown
    $(this.triggeringElement).show();
    };
    
    if($v("Pn_ITEM")=='SHOW'){
    //if you'd want multiple affected elements to be shown at once drop the [0]
    $(this.affectedElements[0]).show();
    };
    

    Create a new dynamic action that has the same conditions of release as your other dynamic action.
    Specify a when condition:

    $v("Pn_ITEM")=='SHOW'
    

    Create a real "Show" type action to show the region.

    Final result should be your dynamic action creating an item in the collection, an update of the report based on the item (but still not represented) and finally a show in the region.

    Remember that stocks will also fire on page load (so don't forget to check the box on the actions of true), otherwise the region does not appear initially.
    I would say that the item is probably not necessary, but depends on any other logic, you might have on your page and possibly interacts with it.

  • Independent migration of LWAPP and dynamic interfaces on the controller 4404

    We are currently migrating from a stand-alone environment. Access points currently take wireless clients and put

    their right in separate VLANs that SSID that they associate with. Each SSID is another customer

    So we are essentially acting as a service provider. We try not to get involved with the functions of layer 3.

    Each range of IP of SSID is ordered by a customer or a third party. So far, we didn't specify an address from DHCP server, the client is getting on one VLAN and it is up to the customer to assign their own intellectual property details.

    Now that we're migrating to LWAPP I found the following-

    -J' need to specify an IP address for each dynamic IP address for each WLAN

    -J' need to specify a DHCP server for each dynamic IP address for each WLAN

    Because I have no control of the PPE, I put in the details of false dynamic Interface but the correct address of the DHCP server.

    It seems to work.

    My questions are as follows:-

    1 / is there a way I can simply place clients in a VIRTUAL LAN using LWAPP equipment so we didn't

    get involved with Layer 3 configuration?

    2 / I noticed when I got a DHCP address on a test laptop client, the DHCP server is 1.1.1.1. The only thing in the network that I know is the virtual IP address of the controller that is used for groups of mobility. Is this normal?

    3/on the controller is the query DHCP has passed from the management or the dynamic interface?

    3 / What is the IP address of the dynamic interface actually used for? At the beginning I forge the DHCP server use it as a source, but my setup works with a bogus address.

    Welcome to the world of LWAPP! It's a pretty confusing to get, so I hope I can answer some of your questions.

    Before directly answering your questions, I want to give you a little if a glimpse as to how traffic flows in LWAPP environment. All traffic LWAPP is placed in a tunnel to the controller (this is why LWAPP APs is no longer need to switch trunk links). Traffic is désencapsulé and sent to the appropriate interface switching environment (management or dynamic). The source address for traffic is changed to match the control interface for traffic must return to the controller in order to get the customer. For example, IP addresses are required on the controller.

    1. think of the controller as a layer 3 switch that masks the identity of its customers. By sourcing all traffic from itself, it ensures that all traffic comes back to him, how it forwards traffic to the client via the LWAPP tunnel. False addresses you entered are actually being used on the network, then you will want to register those with the people in charge. If someone uses this address, it will eventually drop your wireless network.

    2. it is normal. The virtual IP address is also used for DHCP service. Because the controller blocks all emissions, it must the DHCP proxy for each client, where the virtual IP address as well as the need to specify the address of the DHCP server.

    3. I don't know what interface it gets passed on. Maybe someone else can answer.

    4. see above for a description of what it is.

    One last thing. What, exactly, are these fake addresses to which you refer? They are real addresses which comes with? They correspond to the VLAN that you places on? You give them suitable default gateways?

    Don't forget that by configuring these, they are real addresses on your network that you should be able to ping. And yet once, if the address is duplicated on the network, it has the potential to get to the bottom of your wireless network.

    Let me know if this can help, and if you have any other questions!

    Jeff

  • Static text is much better than the dynamic text with the same font settings

    Hello

    I have exactly the same parameters for static and dynamic text, but the static text seems much sharper. Someone knows why?

    Police: Trebuchet MS

    Size: 30 pt

    Anti-alias for readability

    There is a slight difference, but I would not say much better. Incorporate you the dynamic text characters.

  • Insert row into table 2D retaining the previous values

    Amendment of data entered in a 2D array and also displayed a table. When the time rolls 3 columns of data are held and then created line. Problem is the line moves downwards, but the previous data is not stored. I tried using shift register, but that only auto markings lines table to fill as the iteration of the loop. Looks like a basic really simple problem but going round in circles on this one there...

    In this case, the function 'Replace table subset' is what is needed to replace the last values in line with the current values of the user interface.

    On the evolution of the time, an addition occurs.

    An update of the VI is attached.

  • I need help to connect my used ipod touch. The previous owner did not mention that I needed their icloud account to set up my account icloud to the ipod touch.

    I need help to replace a previous owners icloud/apple id. So I can replace with my apple/icloud id, we use it and I was ignorant, I needed previous owners apple id replace it with mine. The previous owner just told me how to reset or to put in recovery mode, but the previous owners apple id needs to turn off find my iphone settings. If I can replace with mine. The difficulty. Help, please!

    You run into the lock of Activation

    Find my iPhone Activation Lock

    If you can't have the previous owner to do

    Turn off find my iPhone Activation Lock

    then back for a refund since yo cannot use the device. Apple isn't going to help.

    If yo cannot come back, turn the unit into the police because it is likely, lost or stolen

  • Windows 7 Image Backup - where can I find the previous image after new backup?

    My previous hard drive died, and I replaced it.

    Good news: I did a backup of the system before the death of completed HDD.  The image is under "WindowsImageBackup" folder on my external drive.

    Then I replaced the HARD drive, picked up at the factory reset.

    Before restoring the image backup, I took a step extra stupid: I thought that I should save its current state before as I have restore the previous state in case any thing wrong, so I started to sign--> system and security--> backup and restore--> backup now

    Bad news: the new backup image sub-folder of "WindowsImageBackup" even erased my previous image!  They have different timestamps, so different names, but the previous image has disappeared after a new creation.  In fact, I killed the new backup process immediately after that I was disappearing from the previous image.  He has not finished, but I can't find my previous image!

    BTW, there is a lot of space on my drive.  It is only 20% used!

    Are there ways I can retrieve my previous image?

    BTW, I use Windows 7 Home Premium.  By default, all parameters are as I do factory reset.

    Suggestions and help is very appreciated!

    Hello

    With the publication of the description, I understand that you have accidentally deleted the system image backup file. I've certainly you will help answer your query.

    I wish to inform you that there is no way to get the previous system back image - which has already been replaced however, you can try a few steps to get the old image to the top, although there is no guarantee that it will work but still, you can try and see if it helps.

    First of all, I suggest you to rename the WindowsImageBackup to WindowsImageBackup. Old then follow the screenshot and select the option highlighted in yellow color select another backup to restore files of.

    Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

  • The call following .swf and close the previous?

    Hi guys,.

    I have a great difficulty using the loadMovie command.

    I want to do a book and at the end of each chapter, the next button will appoint at the next .swf, but the previous should disappear.

    For the moment, I created an empty movieclip named "load" in all .flv files... It stands for the whole time. But when I go to the next swf, it loads above the previous file, accumulating files one above the other.

    Here is the AS what I use in the last picture of my flv:

    Stop();

    next_btn.onRelease = function() {}

    loadMovie ("next_file.swf", load);

    }

    prev_btn.onRelease = function() {}

    gotoAndStop (previous_page_frame)

    };

    Then. all I want to do is create a sequence: 1 2 hits and close file 1

    .. and have the opportunity to return to the previous file, when I want to: in the first image of file 2, the back button will appoint file 1.

    Any ideas? Thank you very much

    You should have a main swf that takes care of everyone else, including your first chapter.

    but, if you want to do it your way, you can use in the main scenario for each swf:

    this.loadMovie ("nextswf.swf"); this.loadMovie ("prevswf.swf")

  • I've deleted all my iBooks but the phone memory shows 4.5 GB of data. How can I clear this space?

    I've deleted all my iBooks but the phone memory shows 4.5 GB of data. How can I clear this space?

    Have you tried a soft-reset/reboot the phone? If that is not free space you could try to download a little ibook on iTunes from your computer (or if you use a Mac updated iBooks application) and select Synchronize on the phone and see if that frees up space

  • I backed up the files on a DVD of a XP OS to put on a 7 OS but the record shows that the data on the DVD is corrupted

    I backed up the files on a DVD of a XP OS to put on a 7 BONE, but the record shows that the data on the DVD is corrupted. I have run some recovery on the DVD programs and even if she shows that 2.3 GB have been used they are unable to find the data

    * original title - I need fast help please *.

    How is not have you backed up the files?  You just burn it to a CD or did you use the 'NT backup' program of Windows XP?  I don't think that the Windows XP Backup program is compatible with the Windows 7 backup program.  The following link contains an article that explains this condition:

    "Windows 7 backup XP restore"

    If you simply copied the files on the CD/DVD, then it is possible the program that copied the DVD not to "finalize" the DVD.  If you can play the DVD on the computer that created it, but cannot on another computer, then this is probably the case.  If this is the case, then put the disk into the computer that created and put in place the program that burned and look under the 'Tools' menu for an option "Finalize"... and do it.

    HTH,
    JW

  • I am new to Adobe, I created an Excel file that I convert the file to PDF, but the converted PDF file shows all the data, missing on the right side of the page

    I am new to Adobe, I created an Excel file that I convert the file to PDF, but the converted PDF file shows all the data, missing on the right side of the page

    Hi Tony,.

    In Excel, click on the Acrobat toolbar, and then click Preferences.

    Now select the option 'Fit the worksheet to a single page' and click ok

    Now, try to convert and check.

    Kind regards

    Rave

  • Change the data of payment in iClould... but do not show the storage I want to buy...

    Recently my account iclould miss his payment to make, and I add another mode of payment by credit card. The monthly amount of iclould has benn already debited from the credit card... but do not show the storage that I would buy for...

    < image published personal information >

    Low contact left link.

    iCloud

Maybe you are looking for

  • Sierra of MacOS e con paper Apple Watch

    Ho aggiornato just he mio MacBook Air 13 "a Sierra of MacOS. HO a Apple Watch 42mm aggiornato con block watch OS 3, con codice. ID active con paper one 2 fattori. Quando provo a lo del Mac paper switch con Apple Watch, dopo aver submitted by Pwd Ammi

  • MacBook air trackpad

    Lately, the trackpad is not getting detected on my MacBook Air power. I don't see the pointer of the trackpad. Sometimes I have to turn off and then turn on one or two times for the trackpad pointer appears on the display. Can someone guide me to sol

  • My finder in El Capitan crash

    Hello! My finder crash. When I open it, it crashes after 2 to 5 seconds. That I can the stimulus of alt-cmd-esc, but then it crashes again. As advised by Linc Davis in another post, I copied the papers at the time of the accident. They are here. If a

  • Compatible hard drives

  • Unknown devices appear on the network?

    Hello. I just bought an E900 and I make TVs and phones on the network, which i haven´t connected. They don t appear in the DHCP list, and I've changed the SSID and password and restarted the router and the PC. They do or see when running - an arp. As