Track return on a hike

Similar Questions

• Return loss calibration

  Hello

  I track (Return Loss) + S11 of ASE and I S11 and S21 (loss of Trace) of just the track

  If I want to cal track of my Return Loss for DUT, how I would go to this topic? ABCD parameters are intrinsically designed for the 2-port networks.

  Wouldn't be all right if I take just size track loss and deduct them from the return loss "HAD + Trace?

  Thank you

  What you describe is a process called out incorporation. You have two networks in cascade and try to isolate the answer of a network of the data aggregate od network.

  Incorporation of radiation is quite simple, you simply convert the parameters S T settings, then multiply by the inverse of the network that you want to embeddeur.

  Here is a link to a tool on ni.com, which can be used for out-of-imbedding:

  https://decibel.NI.com/content/docs/doc-29840

  To answer your question directly, you can do simple subtraction in this case to isolate the estimated loss in question back. There are interactions with the input vector and the mismatch of impedance output where the phases dictate how to combine the waves and complex dipping is the process used to accomplish what you describe.

  Kind regards

  Andy Hinde

  Senior Systems Engineer

  RF and communications

  National Instruments

• Can you get the screen is on-air on the classic to display on a second screen?

  OK long shot and I think that I I already know the answer is no, but here's what I want to do:

  I will be installing an iPod interface to my OEM car stereo, with control of load and playback via the car stereo/CD changer port. -No info on track return to the display of the car in this solution.

  The ideal solution is to hide the iPod in the armrest, run a video of small groups of power for a 4.3 "TFT LCD that I also use for a backup camera (two screens of entry)

  Ideally this second screen would display the same "screen is on the air than the iPod as well as works of art news and artist of the normal Beach/album.

  I'm very technically competent and capable of doing custom wiring, but I'm after a bit of feasibility info!

  Doubtful, although probably not impossible given enough skill and technical expertise.    But the iPod is not in a usable state easily; the case would open with fortune son hanging out of him.

  You can transmit a composite video signal on the dock, use connector of this

  http://www.Apple.com/shop/product/MC748AM/A/Apple-Composite-AV-cable

  but it is to show a video or a slide show, do not for the mirroring of what is on the screen of the iPod.

• Fatal error occurs when you uninstall Apple Mobile Device Support

  Original title - you can't uninstall Apple Mobile Device Support!

  I'm trying to update my iTunes and the iPod Touch, and in doing so, he failed and said that I needed to uninstall the Apple Mobile Device Support and completely reinstall iTunes.  In any case, I can uninstall everything except the Apple Mobile Device Support - I get a message that a fatal error has occurred and it is impossible to uninstall.  Apple told me that it was a matter of Windows and contact you for assistance.  I rebooted and everything else cannot remove one yet this app.
  (I'm on Windows XP Professional)

  Fixed the problem for me:

  I just went through a problem with Apple Mobile Device Support as well.  I continued uninstall then just before reaching 100%, it starts tracking return return to 0%.  I have windows 7.

  Panel--> uninstall a program

  Do a right-click Apple Mobile Device Support--> change

  A window will appear asking if you want to repair or remove.  I said repair

  Once the repair is completed, return to Panel--> uninstall a program

  Double click or right click, uninstall Apple Mobile Device Support.

  He appeared after that he says he has completed the installation, but when I right click on it windows says it has already been uninstalled and removed from the list.

  Hope this helps you like it has helped me.  I imagine that there is another way to get the option to repair/remove apple screen by running some .exe, then you can try to track down if you have an older operating system.

• Question video FLV and Audio

  I have a situation where I am loading a video (FLV) in a Video object on the stage using the NetConnection and NetStream video classes and script action. I want to know if the FLV file I load has a soundtrack or not (some movies don't) so that I can choose to play a default sound track or let the original soundtrack of the film play. Such a thing is possible?
  
  I noticed that the NetStream object seems to have a property, once that 'play' was called, called "audioCodec. I can find no record of this property anywhere, and I wonder if it could be used to test for audio. No sound from my test scenario, and the codec is listed as 0. It would be a reliable indicator of the presence of an audio track? Is there a place I can find the list of codecs and the integers used to represent them in this property?
  
  Thank you very much
  
  Cree

  Sorry, just found the live doc to work with metadata that informs me that flv without audio tracks return "undefined" for audio related metadata. Thanks, that should do it.

  C

• bytesLoaded HELP? !!

  Everything works perfectly except for one thing... for the life of me I can't get the text per cent go to "" after it is loaded.
  Ive tried several ways that you can see and track returns true. I load this way: main.sfw <-videoPlayer.swf <-video/TTH768K_314x210.flv. Evereything works great exept to get rid of the text "100".
  
  Oh help them

  No No. I need to clearInterval not otherwise specified in the text, it's just the value keeps checking the bytesLoaded.

• Get track List - Last Timestamp returns a time one hour behind

  Hello

  I use the DSC module to create traces.  I need the timestamp of the last of a trace.  When I go to the track via MAX (export to text file), I see all timestamps in the trace.  When I use the "Get Trace List.vi" it returns is an hour behind.  I would make up for just an hour, but I thought that I saw that it compensates for return after writing again.  I have a complex code, and after having thought about it, I think the "Get Trace List.vi' should work.  I tried to turn the time zone but this makes no difference.  A solution I just think now is to use the track of the reading, but use a more recent time interval.  In my case I do not know the more lately but if I got the data from last month and used the max/min chart on the table timestamp incomming; It would work.  OK, so I thought about a work around, but maybe someone knows something about why this last time stamp is an hour off the coast?

  Thank you

  Matt

  You have not included everything essential subVIs, but I suspect a problem with the setting "Daylight Saving Time".

• How to fix 01700213 error, track 440, head 70, B105 return code = 0 x 0011

  Slow computer operation.  Performed a full scan and this error keeps coming up error of hard disk 1 01700213.

  Track 440, head 70, B105 return code 0 x 0011

  You must run CHKDSK and tell him to check and try to repair the bad sectors.  Click Start-> computer, then click on the C: drive and click Properties.  Click on the Tools tab, and then click Find now.

  I hope this helps.  Good luck.

• How to return to 'now playing' without restarting the track

  Hey all,.

  Received yesterday my first rocket as a belated Christmas gift.  I had an old Creative Zen for years.  I like the "rocket" so far, but I'm a little confused by one thing.  On Zen, I would be on the "Now Playing" screen which shows all the details of the existing/podcast song and the time bar.  If I went into the menu to do something, say something add to current playlist, I could always return to the playback screen now without any problems.  On the "rocket", if I leave him now playing screen to work on the menu the closest that I seem to get is back to the current list of music but if I select the current playing song it starts again from the beginning.  Is it possible to go back to playing with details screen and the time bar all the current of the track?

  Thank you!

  Rather than wait until it goes off, then come back, you can simply press this little home button (top right) twice. Once will take you home (audio, video, settings, etc.), the second push will return you to the currently playing song.

• Cannot scale manual setting of the time in the data view - returns to autoscale on track

  There was a similar post someone SignalExpress assessment but they have not answered follow-up questions.

  I can't set the time scale (x-axis) in the data view.  When I deactivate autoscale and manually enter a value, it seems to change, that it appears correctly in both the preview and the data display pane, until I hit, then it returns to the autoscale.

  It's maddening.

  The attached JPG illustrates this behavior.

  Hello

  To resolve this problem, you must right-click on the graph in the data view.  Select scale X"uncheck Autoscale.  Then, double-click most value and change the value for the value of low/high range for the desired field of view.  Change the scale of this way back not to Autoscale during execution.

• E280 v2 plays a track and returns to the menu music

  Hello.  I bought a v2 e280 a few weeks ago, and the unit worked fine until yesterday.  I use Windows Media Player 11, and XP v2 and WMP 11 both recognized my e280 each time, until yesterday.  The problems are many, but the main thing I notice is that when I select a playlist for playback, my e280 will play a track (usually the first one) and then he comes back to the music menu.  When I try to pass through the screens of reading to see the next song, I won't get it even the screen (it justs gives options Timer, EQ, and album art).  Forward > | button has stopped working properly as well.  I have the old firmware 03.01.11A and tried to update the firmware.  My PC stopped recognizing my e280 yesterday as well but I couldn't understand how to upgrade the firmware without this recognition.  Now the power button for 15-20 seconds just seems also to power on then off.  Oh, and I removed all the tracks in my GoList, thinking that maybe the problem.  But that solves nothing.

  And when I say it worked fine until yesterday, I mean it sync with WMP11 as a breeze, addition of playlists and titles I had created in WMP11, read playlists with random and repetition, and had no problem with the music downloaded on Amazon or CD.  Until yesterday.

  Did you add any music or do something different with the unit yesterday?

  The 1st thing you'll want to do is update the firmware. This can solve the problem in its entirety, but even if it is not it will make it easier to deal with. In addition, the update adds a nice touch and bug fixes. You can read "what's new" in the post firmware.

  Check out this post for instructions on upgrading your f/w. There is a link to the version firmware inside post. Let us know what has changed or is the same, after that, you (and also if you have said or done anything, just before this happened that could have caused the problem).

• Return to the track error

  Hello

  I was wondering if anyone else has the same problem as me. I have the creative cloud and he keeps returning to trail software. When this happens I can't open one of my projects of Prime Minister because he comes up with an error in sequence. I called about 15 adobe representatives online who normally took control of my computer to "fix" the problem. But a few days later the same error then returned. I started to copy what they have done to resolve the error, but it's getting beyond ridiculous now. This week an adobe representative uninstalled and reinstalled all adobe products, which took about 2 hours, then the error returned two days later. Now, I've been chatting for nearly two hours and been through 4 different operators who seem to not know how help so just switch me to another person. Really horrible!

  Why this error occurs and why all professional can't solve? I hate the idea of how many hours I wasted on this. At least 4 hours this week only. I pay for this service and I'm very unhappy.

  Completely fed up with it. Help someone?!?

  Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC

• The query sql without prescription by will return same result on several tracks?

  Hello
  
  I have a sql without a prescription and I limit the number of rows to 100 max per rownum < 100. Now the question is, if the data set on which this sql is running, does not change, the sql returns the same result the performance of several?
  
  For example, there are 150 lines and the sql returns 100 rows because of rownum < 100. Now running the same sql several times, I have the same set of 100 lines? or it could be 150? On the basis of these the kind of database engine and return data when no order by clause are provided?
  
  Thank you for your time.
  
  -Hozy

  Hi, Hozy,

  Hozy says:
  Hello

  I have a sql without a prescription and I limit the number of rows to 100 max per rownum< 100.="" now="" the="" question="" is,="" if="" the="" data="" set="" on="" which="" this="" sql="" runs,="" does="" not="" change,="" will="" the="" sql="" return="" the="" same="" result="" set="" on="" multiple="">

  N ° if there is no ORDER BY clause, then there is no guarantee that the order will remain the same. If the table is small, the output will probably be the same thing, but you can't count on it.
  I guess that you do not have a CONNECT BY query. CONNECT BY queries without ORDER BY clause or brothers and SŒURS of ORDER BY, the output is partially ordered.

  For example, there are 150 lines and the sql returns 100 rows due to rownum< 100.="" now="" on="" executing="" the="" same="" sql="" multiple="" times,="" will="" i="" get="" the="" same="" set="" of="" 100="" rows?="" or="" it="" could="" be="" any="" of="" the="" 150?="" on="" what="" bases="" these="" the="" database="" engine="" sort="" and="" return="" data="" when="" no="" order="" by="" clause="" is="">

  No, you necessarily will not get the same 100 lines each time. ROWNUM reflects the order in which the establishment has recovered the lines.
  Say you run the query at 11:00. Maybe do you a full table scan to obtain the data on the drive, and the order of the lines is determined by how it data happens to be on the disk. As the data is read from the disk, it is cached in memory.
  Say you run the same exact query at 12:00, without changing the table. Instead of retrieve all data from the disk, Oracle will try to use the blocks that are cached in memory, which is not necessarily the way the blocks are stored on the disk. If some of the older blocks 11:00 to 12:00 (otherwise said, some, but not all, blocks are more in memory because memory was required for other purposes), then the items picked up at 11:00 can be recovered first at 12:00 and the lines that I have high ROWNUMs at 11:00 can get low ROWNUMs at 12:00. (See Matthew 7:30.)

  Again, you would never notice it on a small table. You can run this query

  SELECT  ename
  FROM    scott.emp
  WHERE   ROWNUM  < 10;
  

  a thousand times and get the same results every time. You will get the same results the 1001eme time? Probably, but not necessarily.

  If you want the output to be in a particular order, to use an ORDER BY clause in the main query.
  If you want ROWNUM to reflect a particular order, use a subquery with an ORDER BY clause and ROWNUM reference in the main query.

• Why the change of track information return?

  I always like to make sure that the songs on my computer have the correct information. I'm in my 'My music' folder and set the information in the properties for each song. When I do this, it is also changed in my wmp 11 library. A few hours later, all of my changes are undone, and I have to start all over again. I would like to know what are the measures to be taken in order to avoid that from happening.

  In WMP, please go to Tools - Options - Library (press Ctrl + M, if you don't see the Tools menu). Is to replace all the media checked information? If this is the case, then check only add missing information instead, or disable completely recover additional Internet information if you do not need. Who help me?

• Doubt regarding tracking error return

  Hello
  
  I'm just executing a code example in which I want to know on what exactly the error line.
  
  But it is not working properly...
  
  I will carry out this version of Oracle 10 g and 11g also...
  
  Code: -.
  
  ---------------------------------------------------------------------------------------------------------------
  
  BEGIN
  EXECUTE IMMEDIATE 'garbage ';
  Exception
  while others then
  DBMS_OUTPUT. PUT_LINE (DBMS_UTILITY. FORMAT_ERROR_BACKTRACE);
  lift;
  end;
  
  
  ORA-00900: invalid SQL statement
  ORA-06512: at line 6
  
  ---------------------------------------------------------------------------------------------------------------

  Works for me (Oracle 11.2.0.1, SQL * Plus 11.2.0.1). You have serveroutput?

  SQL> begin
    2     execute immediate 'garbage';
    3  exception
    4     when others then
    5        dbms_output.put_line(dbms_utility.format_error_backtrace);
    6        raise;
    7  end;
    8  /
  ORA-06512: at line 2
  
  begin
  *
  ERROR at line 1:
  ORA-00900: invalid SQL statement
  ORA-06512: at line 6