Tracking number of booster power cord: no results

Similar Questions

• HP 640 fax: power cord for hp 640 fax

  I need a power cord for my HP 640 FAX machine.  I don't have the original.  He needs two pins of the cord that

  connects to the machine.

  Thanks for your help.

  Coder1

  Good Afternoon@coder1,

  It is a great location for extra support! I see that you need the cord supply for HP 640 FAX. I'd be happy to help you.

  I provided you with a link to the Web Surfer parts and HP parts store site.

  Welcome to HP PartSurfer!

  HP parts store.

  You can contact the HP Customer Service to inquire about ordering the part too. Check the model number and the form to receive a file number for faster assistance.

  To say thanks, you can click the 'Thumbs Up' and if the problem is resolved, you can click on the button "accept as a Solution.  Please let me know the results. See you soon!

• Pavilion DV7-6175us: wire frayed at the power cord

  

  I just discovered this thread in my power cord cut tonight. Spare part number is 609940-001. As you can see, the white wire is broken, but the only issues I have experienced with my laptop is my AMD display driver to crash. But after you have reinstalled it and Direct X, as well as some versions of Microsoft Visual C++, the stability of video cards has improved considerably. But tonight, he crashed twice in 5 minutes, and then a few seconds later, just let Windows down and showed me a message of BSE on my display driver. I then looked at my power cord, and I find the severed cord. The severity of a problem is the next, and how long should I try and get a replacement cord? Thanks for reading and thanks in advance for your answers.

  Stop using it. It is a fire hazard and a danger to your laptop. Get a new one immediately.

• problems of ultra maxx charges with a power cord

  Sometimes my Maxx will begin charging when I plug, sometimes it requires a reboot before it will start to load. I tried a new power cord from Verizon and the results are the same. I got the phone because he is out, and the problem started a couple of weeks. Someone can offer some advice or should I go to? Any suggestion would be appreciated.

  By a new power cord do you mean just the cord or adapter as well? If only the power cord that I suggest that you try using a different card first thus.

  Also make sure you have the USB plug inserted at bottom. You don't want to lift or turn it on, but push to make sure that it is firmly in place.

  If this continues to happen that I would propose a factory data reset. Who will rule on software issues. If the FDR works advertising repair/replacement would be the next logical step. HTH

• Looking for an AC adapter and power cord for a HP Pavilion 2 p-1105, PN:QW819AA. Parts order fiasco.

  Not my computer, but my father, apparently he has lost the power adapter and power cord before he surrendered.

  I have never had a difficult experience find a part, it's like the HP support site is this circular black hole. I understand that this isn't a standard power supply, but HP power cord... Seriously, why the specifications list and the list is not part numbers.

  Call the customer support isn't much better, was routed from the line parts store to the HP Shopping, back to the parts store channel. Each single representative that I spoke too cannot identify this part.

  a guy tried to tell me everything that I needed was a rope, according to the installation instructions, is not correct.

  At this point, I'm extremely frustrated and very unlikely never recommend or buy an HP product again.

  Here are the specifications of the desktop HP Pavilion p2-1105. According to the specifications of the computer, this model requires an external power supply with the following features;

  External 90W power supply (100V-240V)

  Total wattage: 90W

  Input voltage:

  100-127V/3A (50-60 Hz)

  200-240 v/2A (50-60 Hz)

  Output voltage: 19V

  Based on the HP part Surfer parts list for the product number: QW819AA - model name: desktop HP PAVILION P2 - 1105, the following seem to be what you are looking for.

  HP P/N 213349-001 - cord (black) - three sons, 3.0 m (9.8 ft) long - right taken C5 (F) (Canada and United States)
  HP P/N 619752-001 - food - Ext AC Adpt Lolonis-r RT Angle Connector 90W

  HP P/N 695835-001 - 90W square EPS (Domino) 3 p (which seems to be an alternative to the HP P/N 619752-001)

  Please send Bravo

• OfficeJet 8720: Officejet HP 8720 (D9L19A): power cord issue & legality in the United Kingdom

  Hello

  As a society, we standardize more than 150 sites on the new printer HP Officejet Pro 8720.

  We ordered about 8 at our dealer online recently (Softcat) and each arrived with a European power cord 2 pin and not a power cord 3 pins of the UK.

  This causes significant confusion for our end users, and I think that it is illegal to even provide goods in the EU without the correct national power cord.

  Our retailer say that HP have armed upward and shipped loads of these 8720's without the correct power cords. It seems that a mass surveillance on HP is illegal and a part too? How can this happen?

  Surely all stock the 8720's should be limited to the British market and fixed with the right power cord?

  I have not reported this Exchange Standard yet, but I want to just get an idea of what's going on?

  Thank you

  H

  @HKCHG

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  Thank you for visiting the Forum from HP Support.

• Power cord not charging Omni10

  Bought an Omni10 in December of 2013. I know that there is a power supply problem because my power supply has already been replaced once. Still, it does not load my tablet. Says that it is connected but does not support. How can I get a new power cord. (FYI, work for HP for the last 21 years).

  Hey @Alainak,

  Welcome to the forums of HP.

  I understand that you are looking for a replacement power supply cord.

  The HP Forums are used exclusively for technical support and troubleshooting. If you are looking for a replacement under warranty, you will need to contact our telephone support team. Visit http://h22207.www2.hp.com/contact-hp/ select your region and then click on contact Support upward. Fill out your information on the product and then fill out the form at the bottom of the page. When submitted it will give you a case number and phone number to call.

  If you are looking for a reference number for the purchase of an adapter, they are as follows:

  • For use on all models of tablet in Europe and South Korea: 741855-009
  • For use on Tablet all models in North America: 741855-008
  • For use on Tablet all models in the United Kingdom: 741855-003

  You should be able to order one through HP part Surfer or you can find a cheaper on sites like Amazon or eBay.

  Thank you.

• Power cord power supply and adapters for series nr9700

  I would like to buy a replacement power supply cord and possibly an adapter for my laptop nr9700.  passing by the parts store is quite expensive but I think 11.25 in freight for a power cord is outrageous.213349 - 001 is the part number for the power supply cord and 432309-001 for the adapter.  Is there something else comparable for the power cord?

  I have a wireless connection and want to move the laptop from one room to the other without constantly by unplugging and plugging it in.

  Or you could just buy it here to 63.99 USD (sale today) - includes sector and power cord adapter and it comes with a 1 year warranty.

  Message edited by Kalt 26/12/2008 11:59

• OfficeJet 8600 more: power cord with adapter for Officejet 8600 set more lost

  Lost my power cord complete with adapter. Can I use a power cord generic Office Depot, without the 'square' on the wire? Or is it necessary to have the power cord with the adapter, as it was originally? It will damage my 8600 more to use a power cord without this "square" in the annex on my more than 8600 all-in-One? Thank you.

  Hello @DB2,

  I understand that you have lost the power cord for your HP Officejet Pro 8600 more e-all-in-one printer and you want to replace it. I would like to help you to solve this problem today. The HP Officejet 8600 more only comes with a power cord. The adapter is built into the back of your printer. You have to unscrew the back of your machine in order to access it. Therefore, if you buy a spare power cord it should work perfectly for you.

  The power requirements for this machine are:

  • Power: Universal power adapter (external)
  • Power consumption: Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3 Hz)

  Output voltage: + 32V / + 12V to 1095 mA/170 my

  • Consumption: 30 watt impression (project Quick Mode); 32 watts copy (Fast draft Mode)

  -Source

  You can buy a power cable of the store to use with your printer, or you can contact our Technical Support queue and buy the correct power cord for your printer by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if this information solves your problem. Thanks for joining the Forums from HP Support. I look forward to hear from you!

• DV 6910us the bad power cord connector

  My laptop HP Dv6910us has developed a problem with the connection of the power cord into the computer.  Central Post Office of the computer seems to be sure.  Problem is that when the power is connected, you must screw the connector, crossed their fingers and maybe blue light to indicate the power of the computer turns on.  We tried another power supply not HP and it worked for a few months, and then the same problem occurred.

  Is it possible to replace or repair the HP power connector that goes into the laptop?

  Hello

  External review of the power jack on the laptop wouldn't tell you thing.

  A multimeter connector on the external adapter test will be.

  So if there is output voltage of son but not the connector of the AC adapter it should be able to go to an electronics parts place, and get a replacement.

  If this are the results of his test, why not just ask him if he can take the power adapter to the store, find a matching connector and replace. ?

  Best regards

  ERICO

• Power cord screen brightness variation and no brightness adjustment

  For some reason, it just happened by chance. When my power cord is inserted into my laptop instead of the increase in brightness of the screne, it decreases and her pretty dark as well and I don't know how to get back to the top.

  Anyone have any idea whats going on. Because I haven't yet touched it and it just went.

  Please can someone help, because it's very difficult because I can barely see anything.

  This product Tag number you provided is not coming as valid on the Dell site.  Please check again - I know it is difficult to read because it is so small.  So I could not check the details on your machine, but I don't know if this will help because Dell doesn't offer a lot of information on how to control hardware devices on their systems.  But if you check and send me the correct code, I'll try to cehck and see anyway.

  I found the following on the Dell site and don't know if it applies to your specific system, but this is something we have not tried, so it is worth it.

  Adjust the brightness

  "To set the screen LCD Brightness hold FN key and press the up arrow to increase the brightness.
  or just holding the key FN and press the down arrow to decrease the brightness. »

  Here is a thread in the Forum of Dell, I found on the issues of brightness with the Dell Inspiron 1545.  It includes the same procedure described above - but it includes a position that most of these problems is caused by problems with the motherboard.  I don't know if this is the problem, but if it is then, we deal with a hardware problem and not a software problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All-in-one DELL power cord

  I have a Dell all in one that is about 4 years old.  The other day I started up and used for a bit.  I left to go eat and when I came back the computer was off.  I tried to push the power supply, check the power strip and made sure everything is properly connected.  No change.  I noticed that the ring of blue light around the power supply is turned off, so I unplugged the computer and the power strip.  Plugged in the power band and the light is on.  Fantastic, until what I plugged it into the computer where it was released.  I tried some other power cords (same size, etc.) and that they would also have slight shift when connected to the computer.  What can I do to fix this?

  Best to remove your serial number.  You have an Inspiron One 2020

  The motherboard can be stop due to internal failure.

  Card converter or another motherboard problem.

  Dell MKTK1 48.3HC02.011 Inspiron One 2020 LED converter Board

  https://www.Amazon.com/Dell-Inspiron-MKTK1-converter-48-3HC02-011/DP/B00N28VFE2

  If the culprit could be your power supply internal or internal 3V CR2032 lithium cell battery. To remove and replace the coin cell battery is fairly intensive.

  https://www.Amazon.com/Dell-Inspiron-computer-power-adapter/DP/B00URXC86O

  • Inspiron One 2020 manual owner PDF (3795 KB)
  More languages
  • Inspiron One 2020 manual (Touch) PDF (4383 KB)
  More languages
  • Inspiron One 20 2020 Aio spécifications PDF (108 KB)
  More languages
  • Inspiron One 20 2020 AIO Windows 7 Quick - Start Guide PDF (249 KB)
  More languages

  • Inspiron One 20 2020 AIO Windows 8 Quick - Start Guide PDF (89 KB)

  More languages

  225-2882: Inspiron One 2020 with Energy Star 5.2 in conformity

  317-9687: processor Intel Pentium G620T (2.20 GHz, 3 MB Cache)

  317-9652: 4 GB MEMORY DDR3 SDRAM TO 1 333 MHZ-1X4G B

  331-3354: Dell KM632 WL KB and MSE - U.S.

  320-3236: 20 "high-definition (1600 X 900) LED no touch

  320-3238: Intel HD Graphics 2000

  430-4696: 802.11b/g/n, BT4.0 DW1703

  342-4367: 500 GB SATA hard drive 7200 PR M

  421-5693: Windows 7 Home Prem 64-bit, English, without media

  410-0547: adobe Acrobat Reader

  318-1971: 8 X DVD tray loading CD/DVD Burner P 9.5

  430-4737: Dell 1703 Wireless 802.11b/g/n, Bluetooth v4.0 + THE

  331-0458: U.S. power cord

  331-6724: MOD, ADPT, AC, 130W, CLFD, 3 P, L6, WW

  331-5886: location parts-English/Spanish/french nch

  331-6728: MOD, PLCMT, 2020, GBL

  331-6726: shipping material, Direct

  410-0569: McAfee 11, 15 months

  331-6727: Resource DVD, Inspiron One 2020

  421-8184: additional software

  331-7678: LBL, REG, AIO, 2020

  410-0450: Microsoft Office Starter

  420-8878: Dell flexible contracts home

  421-4356: software, GB DataSafe Online 2.0 2

  330-0172: S and P Marcom drop-in-Box for desktops DHS

  331-6725: MOD, LBL, REAR, IO, W/O TVT, 2020

  310-5678: mouse included with the purchase of keyboard

  430-3322: 10 / 1000 Ethernet built-in

  331-2594: integrated 5.1

  730-1929: fixed Hardware Configuration

• LaserJet 400 ColorMFP M475dw: Problem of power cord for m745dw multifunction color HP LaserJet Pro 400

  I'm trying to find the number of pieces of the electric cable.

  My warranty expired on 6 December 2014.

  My power cable is flaky.

  When I move a bit the the line cord with the output plug, my printer would turn off and turn on again.

  If I move the power cord a little by the power printer connection, power remains standing.

  Can anyone provide me with the part number of HP for the power cable?

  Thank you

  Yucaipa

  This printer uses a standard pc power cord.  All power cord printer or standard pc with 3 connections will work fine.  I just hope that it is the power supply cord and not taking on the printer.

• dv7-1270us accidental power cord Bump

  So, the other night, I was using my laptop with the power cord plugged in. I had completely forgotten and picked up my laptop in another room. It pulled out the power cord from my computer.

  I now have trouble to take the power cord to the power jack on the side of the laptop. I don't have to wave around, but it takes a few tries before it connects and starts to charge the battery. When he does not want to take the charger, the little LED next to the power supply blinks instead of stay on constantly. When the computer accepts the cord, the light stays on.

  He isn't physically feel that something is wrong, but if I have to fix it, no one knows how I would look at? Or should I just watched in get a new computer?

  Thank you

  James

  Decision-making is modular, which means that it can be replaced without welding. Decision-making is at little cost; well under $ 20. Assuming that no other damage has been done other than the Jack, you look at maybe $100 to replace the Jack in a local store. The work is also achievable by a well-organized and modestly qualified amateur. This is the plug for $4 on eBay:

  http://www.eBay.com/ITM/DC-Jack-power-for-HP-Pavilion-dv7-1000-series-DC301004S00-with-cable-/170859771057?PT=Laptop_Adapters_Chargers&hash=item27c80934b1

  Your manual:

  Manual

  Page 102. My only reservation is that the dv7-1000 is one of the hardest working models on... a lot of things going on in there. lots of screws and subsets. However, if you follow the manual, keep track of screws and usually attention it can be done.

• Screen VAIO Pro 13 gradation when power cord plugged

  I just had a problem to occur on my new Pro 13 in Vaio, Windows 8.  The model number for my Vaio is SVP132A1CL.

  The problem I have is that when I plug the power cord into the machine, the screen fades until I can barely see anything.  When I pull the plug out, and the computer returns to the battery power, the display lights up to a normal level.

  I tried to restart my computer several times, and the problem does not go away.

  What should I do?

  Thank you very much.

  Kenton,

  Try this:

  1. open Windows charm and type in 'Power Options' and click on it under "settings".

  2. find the power plan that you are underway and click "change plan settings".

  3. under "Adjusting brightness of plan" adjust until you are desirable under the "battery" and "Plugged in" brightness