Trackpad works not while I use my keyboard

Similar Questions

• Z500 touchpad work not when you use the keyboard. Please help me please!

  Hello

  I recently bought a lenovo z500 and it's great, but I have a little problem. When I use the keyboard to play games (I use the WASD keys) the touchpad does not, which means I can't play. Help, please!

  I got it finally started working by removing the pilot of the momentum. I don't think that I will reinstall it. Thanks for your help

• Bug? : Windows 8 PS/2 keyboard not detected after used wireless keyboard

  I have Windows 8 standard on a new custom desktop PC.

  I connected a Microsoft Basic Keyboard 1. 0a, which is provided with a PS/2 Plug and the keyboard worked fine.

  I then disconnected the keyboard and connected a Microsoft Wireless keyboard 3000 V2.0, via the supplied USB dongle.

  I turned off the PC, pulled the dongle USB wireless and connected PS/2 keyboard.

  Locking digital led lights on the keyboard, but the pressure on the keys has no effect.  Oddly, when the PS/2 connector is connected to the PC, the PC turns on.

  When I look at the human devices on the Control Panel, no keyboard appears.

  I now use a USB keyboard for this type and it works fine, but I wish I could use my keyboard PS/2 Microsoft with Windows 8.

  Someone from another the same lives, or able to reproduce this?

  I see exactly the same thing, the PS2 keyboard works fine in BIOS mode before starting, but fails once windows is up and running, I installed Windows 8 with a USB keyboard and then switched on MSFT wireless comfort keyboard. and so far don't have to work.

  OK, here's the answer, thanks to Serdar for this:
  Windows supports USB or PS/2 keyboard connection, and may in fact support having more than one such device entry plugged at the same time. However, when a PS/2 keyboard is uninstalled and a USB keyboard is the main input device (via the keyboard in the control panel), PS/2 keyboard support is disabled.

  This can be frustrating, if a user needs to plug a PS/2 keyboard to perform debugging in Windows, or when a USB keyboard is no longer working properly due to problems with the USB subsystem. Note: A PS/2 keyboard still allows access to the BIOS and will work in the bootloader. It just won't work properly under Windows. (He, however, usually working in the Recovery Console.)

  Keyboard PS/2 devices are governed by a service level of the kernel called i8042prt, short for the technical name for the PS/2 keyboard port. When a USB keyboard is added as a replacement for a PS/2 keyboard, the i8042prt service is disabled by force. This avoids a conflict between PS/2 and USB, but if a PS/2 keyboard is reinstalled, the service is not automatically restarted.

  To return using a PS/2 keyboard, the user must edit the registry to restart thei8042prt service. To do this, inHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\i8042prt,change the value of Startand assign a hexadecimal or decimal of 1. Restart, then switch to a PS/2 keyboard via the keyboard in Control Panel.

• trackpad works not

  Good evening

  as I turn on my macbook pro trackpad not work so I have to turn off many times until it works

  What should I do in this case

  If you have a removable battery, one of the causes of the problems of trackpad is a swollen battery since that place force on the underside of the trackpad.

  Otherwise:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Good popups works not while the popup blocker is disabled

  I have several popup that I need to open. These pop-up windows - up connection us.battle.net not give me opportunity to put in user name or password. and my popup jobs to view my pay check or edit information that I need to change does not work. My friend is having the same problem both using firefox 12. and we use two different versions of windows, I'm uing win 7 64 bit, it is using win vista 32 bit. Only, this has happened for about 2 to 3 weeks. I also have an inability to open addons option

  They use a DIV which opens a document via an OBJECT tag.

  • https://us.battle.NET/login/en/login.frag

  Also, the password field uses autocomplete = off for additional problems.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• Scan to e-mail, works not while on the other are. HP Color 200 M251nw

  I work for a large company, with thousands of hp printers.  We have very strict policies for printers.  Our network is configured to accept internal emails on port 25 to our using unencrypted SMTP address or user names, only IP.

  Last week I installed a new printer configured and set SMTP ip address on port 25 and only edited the sender to No_reply @. And I tripled checked the IP address

  HP Color 200 M251nw

  I ping the SMTP server of the cable.

  The printer can receive network task.

  other printers work with this setting.

  It cannot scan to e-mail.

  Other printers (models simular with the same settings and) can scan to e-mail.

  Any ideas why it does not work?

  Yesterday, I drove into a new 500 hp printer. Before I installed it, I decided factory discount for the 4th and final time.

  Miraculously it worked. No idea why.

• am not able to use the keyboard Finns characters.how special use these special characters

  We bought a new acer laptop

  specifications of the laptop are as mentioned below >

  ACER ASPIRE S3 13.3 INCHES

   

  We are not able to understand how to enter some special characters using the key board, some characters are shown below

  a o a

   

  Could you please inform us about how this particular buttons might be enabled.

  Two methods:

  1. use the character map to select the character and copy/paste in your application

  2. change local/keyboard control/regions and languages/change keyboard that some keys are mapped to your special characters

  For more information, Google keywords above.

• USB ports not working not online when using wireless

  Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

  Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

  As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

  I would be eternally grateful if you could help with this frustrating situation

  Kind regards

  Graham

  Hi CindyThrelkel,

  Try the following steps to resolve the problem:

  Method 1: Run the troubleshooter of material and check what is happening.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  You can also check:

  In Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Hope this information helps.

• BlackBerry Smartphones Trackpad works not when the camera

  My Torch 9800 has lost the possibility to zoom in, either by the trackpad or using the touch screen. He is also running very slow and sometimes hangs.  I use the software up to date.

  Hello mariajh

  Welcome to the community

  Please restart the phone by removing and placing the battery back while the unit is on. This process has fixed application inside modules without losing any stored data. Let us know if you still experience the issue after that.

  Ron

• liaison work not when you use EL for Hashtable keys

  Hi all

  Here's the scenario: I have an iteration of the external, in this iterator, a table and a PanelGroupLayout are generated; the PanelGroupLayout displayed or not displayed depends on a property in backing bean which is a hash table and touch which is based on the attribute of the external iterator, so access to the current item in the hash through table

  the key, he has incorporated EL; and inside the table, there are 2 radio buttons and each is bound to an instance of CoreSelectBooleanRadio using a hash table and key in this table is based on the same attribute of the external iterator (so same EL), the segment code looks like this:

  < tr:iterator var = "item" varStatus = "status" value = "#{bk_myBackingBean.subQuestions}" lines = '0' > ' "

  < tr:panelBox > <!-block test to check how to access the hastable value is OK->

  < tr:outputText value = "#{item.questionNumber}" / >

  < tr:outputText value = "#{bk_myBackingBean.dependent.medicalData.displayQ2Answers [item.questionNumber]}" / > <! - it's a good way to get the hastable value - >

  < / tr:panelBox >

  < trh:tableLayout >

  < trh:rowLayout >

  < trh:cellFormat columnSpan = "2" inlineStyle = "padding: 10px 0 10px 50px;  styleClass = "alignleft" >

  < label > < tr:outputText value = "#{item.questionLetter} #{item.description}" / > < / label >

  < / trh:cellFormat >

  < trh:cellFormat columnSpan = "2" inlineStyle = "padding: 0 0 10px 50px" styleClass = "alignleft" >

  < tr:panelGroupLayout layout = "horizontal" >

  < tr:selectBooleanRadio id = "Q2No" group = "question2 #{status.index}" text = "" autoSubmit = "true" inlineStyle = "border-width: 0px; »

  valueChangeListener = "#{bk_myBackingBean.QuestionChangeListener} '"

  binding = "#{bk_myBackingBean.dependent.medicalData.q2NoRdos [item.questionNumber]}" "

  >

  < f: attribute = name value = "#{item.questionNumber"questionNumber"}" / > "

  < / tr:selectBooleanRadio >

  < tr:spacer width = "5px" / >

  < tr:selectBooleanRadio id = "Q2Yes" group = "question2 #{status.index}" text = 'Yes' autoSubmit = "true" inlineStyle = "border-width: 0px; »

  onclick = "removedRequiredError (this.ID)" "

  valueChangeListener = "#{bk_myBackingBean.QuestionChangeListener} '"

  binding = "#{bk_myBackingBean.dependent.medicalData.q2YesRdos [item.questionNumber]}" "

  >

  < f: attribute = name value = "#{item.questionNumber"questionNumber"}" / > "

  < / tr:selectBooleanRadio >

  < / tr:panelGroupLayout >

  < tr:panelGroupLayout layout = "horizontal" >

  < tr:outputLabel id = "Q2Error" value = "#{bk_myBackingBean.dependent.medicalData.questionErrors [item.questionNumber]}" "

  styleClass = "error" / >

  < / tr:panelGroupLayout >

  < / trh:cellFormat >

  < / trh:rowLayout >

  < / trh:tableLayout >

  "" < tr:panelGroupLayout layout = "default" inlineStyle = "#{bk_myBackingBean. dependent.medicalData.displayQ2Answers [item.questionNumber]}".

  I checked the value of #{item.questionNumber} is just out of view it in the interface user as described above and also I tried to exit with a value in the hashtable and it is successfully recover and displayed in the user interface. (Those who are in the < tr:panelBox > block above) and the hastable displayQ2Answers is of type < String, String >. So far so good, but when I tried to link in what follows the radios and the PanelGroupLayout, he throws NullPointerException. But if I tried to link explicitly radio to an item in the hash table instead to use the key "" EL:

  "Binding =" #{bk_myBackingBean.dependent.medicalData.q2NoRdos [Item.questionNumber]} '-> binding = "#{bk_myBackingBean.dependent.medicalData.q2NoRdos ['q2a']} '

  "Binding =" #{bk_myBackingBean.dependent.medicalData.q2YesRdos [Item.questionNumber]} '-> binding = "#{bk_myBackingBean.dependent.medicalData.q2YesRdos ['q2a']} '

  then the page is rendered with success.

  I'm pretty confused at this point: as you can see, when it relates to a hash table and hastable type < String, String >, I'm able to retrieve the element in the Hashtable using EL for 'key', but when the binded hastable is type of < String, CoreSelectBooleanRadio > or < String , CorePanelGroupLayout > (this is not shown in the above code segment), the link seems defective. I think with the exception of pouinter NULL can be caused by the initialization of the bound element, but when I replace the EL with the string for the key, as shown above, the page works. so apparently not caused by initialization

  . What follows is an overview of the data model, this is how I initialize the option button:

  public class MedicalInfo {}

  == getters and setters are defined but not shown here

  / / theare hash tables used to be linked to radio buttons

  Hashtable < String, CoreSelectBooleanRadio > q2NoRdos = new Hashtable < String, CoreSelectBooleanRadio > ();

  Hashtable < String, CoreSelectBooleanRadio > q2YesRdos = new Hashtable < String, CoreSelectBooleanRadio > ();

  / / these are the items that are stored in above hash for the actuall link tables

  private CoreSelectBooleanRadio q2aNoRdo = new CoreSelectBooleanRadio();

  private CoreSelectBooleanRadio q2aYesRdo = new CoreSelectBooleanRadio();

  and in the constructor, except for the hash for the binding tables:

  public MedicalInfo() {}

  ...

  q2NoRdos.put ("q2a", q2aNoRdo);

  q2YesRdos.put ("q2a", q2aYesRdo);

  ...

  }

  Where could I have missed or done wrong? Any hint is appreciated!

  Thank you

  Shawn

  I'm pretty confused at this point: as you can see, when it relates to a hash table and hastable type of , I'm able to retrieve the element in the Hashtable using EL for 'key', but when the binded hastable is type of or (this is not shown in the above code segment) the link seems defective. I think with the exception of pouinter NULL can be caused by the initialization of the bound element, but when I replace the EL with the string for the key, as shown above, the page works. It is not caused by the initialization

  Well, #{number} is not resolved in the same phase as the 'binding' property ("compulsory" is resolved in the phase of restore view and variable "var" is resolved in the rendering phase).

  Dario

• speakers work not when you use the external monitor

  I use a laptop HP Envy and HP Pavilion 25bw external moniter connected via an HDMI cable. With the help of Windows 8.1. The sound is muted when the laptop lid is closed. If I open the lid I hear for about 2 seconds, then it turns off. If I remove the HDMI cable, the sound lights. How can I get the sound to work with the connected 25bw and close the lid?

  Hello

  Please try to hell sound HDMI playback devices

  Right click on the speaker icon,

  Select playback device

  Click with the right button on HDMI sound

  Disable it.

  Kind regards.

• I'm not able to use the keyboard to type negative values in the mode of developing LR6. Whenever these negative values are reset to zero. Can someone help me?

  I use LR 6/CC 2015.

  Whenever I type in a negative fashion develop it is reset to zero after entry or tab.

  I type in positive values remain and are not reset to zero.

  In older versions of Lightroom, I had no such problems.

  I have an iMac 27 with Yosemite 10.10.3.

  Hope someone knows how to fix this annoying problem.

  Your LR is configured in one language other than English?  If so, this is a known bug.  See the remark made by Simon Chen employee under this post (you need to click on see more reviews to actually see): 6 Lightroom: Bug of negative values (in German).   The comment includes a workaround solution that is to edit a text TranslatedStrings.txt.

• the user is not able to use the keyboard to enter the value in 'overview perspective'

  All our EN indicates that the user cannot enter any value in 'overview perspective'. They must expand the dimension and choose what they want.

  Is there a way to allow them to enter the value they want to see?

  I followed the oracle solution is to disable the "'enable screen reader support" in preferences of FR. Log out and log back in, but it still doesn't ' work. "

  Someone at - it meet this problem before?

  Thank you

  Kim.

  I have the same problem and when I click with the right mouse button in the dialog box update, it works. I think it's a browser problem.

  Concerning

  Altair

• Keyboard and trackpad not working not

  Hello world

  so I bought my macbook pro in September 2015 and since then I have problems with the keyboard and trackpad doesn't work do not randomly. I brought the device to an Apple dealer and that they could not fix it, because at the point where the laptop was working fine. This morning I finally found something useful in the newspaper.

  First, while the keyboard and trackpad work not I received a lot of messages like this in the console:

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x402E, received 0x0000

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x0000 0x0000, received

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x0000 0x0000, received

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x0000 0x0000, received

  Then it happened:

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0xD8A4, received 0x0000

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer NAK received unit

  10/01/2016 11:09:19.000 kernel [0]: Error: AppleHSSPIController::doSPITransfer CRC of the device was not valid: calculated 0x45B4, received 0x0000

  10/01/2016 11:09:21.000 kernel [0]: AppleHSSPIController::_enqueueSPICommandGated SPICommand has expired. 208, transactionType 64, frameNumber 0 interface

  10/01/2016 11:09:21.000 kernel [0]: error: internal Apple keyboard / Trackpad::_DoDescriptorRequestGated has no question of error request: 0xe00002ed

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [ATC] [error] AppleDeviceManagementHIDEventService::processCriticalError received Critical Error: 0x00000010

  10/01/2016 11:09:22.003 SystemUIServer [404]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  10/01/2016 11:09:22.003 blued [93]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  10/01/2016 11:09:22.004 SystemUIServer [404]: error: [AppleBluetoothHIDDeviceGen2] [_setEventService:] could not copy address BD_ADDR

  10/01/2016 11:09:22.004 blued [93]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [ATC] AppleDeviceManagementHIDEventService::processWakeReason Wake reason: button (0x03)

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [MT] AppleMultitouchDevice::start entered

  10/01/2016 11:09:22.000 kernel [0]: [HIDDEN] [MT] AppleActuatorHIDEventDriver::start entered

  10/01/2016 11:09:22.000 kernel [0]: enter BuildActDeviceEntry

  10/01/2016 11:09:22.000 kernel [0]: AppleActuatorDevice::start entries

  10/01/2016 11:09:22.000 kernel [0]: out of BuildActDeviceEntry

  10/01/2016 11:09:22.000 kernel [0]: Apple keyboard internal / Trackpad::start successful start

  and now everything works fine.

  Now my question is: can I bring my camera to a repair because it is still under warranty, but I need my laptop everyday. What should I do? Buy a new one and then put it back? I can't believe that I have questions about a machine, I paid over 2 k euros.

  Do you think is a hardware problem or an osx bug? I'm under 10.11.2 btw.

  Thank you.

  Not OK, so no support in this forum... I called apple and they told me I should put the laptop to apple repair center I did, but they could not reproduce the error (which is random) so that they could not fix it... Now, what are my options here? Am I stuck with a defective machine I paid 2400 euro?

  If you choose apple to have a portable stable and a good customer support as I have, please, be aware of this...

• trackpad is not working I use an external mouse

  trackpad is not working I have to use an external mouse.

  Hey there, here are some tips that might solve your problem.

  1 - Make sure you are on the last update. To see if updates are available for your trackpad, open the App Store and click the updates at the top of the window.

  2-

  Check your settings

  Assuming that there were no updates available (or they do not solve your problem), the first port of call should always be your trackpad settings. Many complaints can be resolved simply tweaking a few options