Traffic redirect Internet from the remote site on the main site using the tunel of vpn ipsec

Similar Questions

• Unable to connect to the internet from the Standard user account.

  Original title: query on standard user accounts

  I created a standard user account, but I can't connect to internet, my administrator account is correct, what do I do?

  Hi MaxQG,

  1. what happens when you try to access the Internet from the standard user account?

  2. you receive messages or error codes?

  3. have you ever connect to the Internet from the standard user account?

  You can check if there are parental controls together to prevent the user to access the Internet. You can see the bottom of the article for more information on this:

  What can I control with Parental controls?

  You can also create a new user profile and check if you are able to navigate new user account.

  Create a new user account

  If you are not faced with the same question in a new user account, you can check the link below and use the steps provided to screw a corrupted user profile
  Difficulty of a corrupted user profile

• cannot access the internet from the desktop

  I am able to access the internet through the application of start page, but cannot access the internet from the desktop page. The convenience store has not detected a problem. Does not work via Wifi or wired broadband direct.

  Hello

  Are you using the right Internet Explorer?

  There are two more separate... From the start screen and another completely different for the office.

• How to configure the VPN LAN to access the internet from the remote network

  I have set up for our project site to another Office VPN. Please join.
  Now I have already configured Site to site vpn between ASA 5510 and 1841 router.

  HQ LAN

  Branch of the LAN
                   10.2.1.0/24 > ASA 5510 1841 > > INTERNET < 1841=""> <> 10.30.3.0/24
  ^
  ^
  ^
  ^
  Call Manager
  No. 2851
  Now access from branch LAN LAN of HQ each other.

  I face problems that are
  (1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH
  (2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?
  (3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?

  Please give advise me how should I do.

  Hello

  (1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH

  Answer:

  You must configure the NAT and crossed to the ASA HQ so that the VPN branch router provides LAN and u-Turn, access to Internet of the SAA.  You must first seup NAT for the branch on the SAA router subnet, then you must type the command:

  permit same-security-traffic intra-interface

  Here's a great example for VPN client hairpining.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?

  Yes, you can

  (3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?

  You must change your subnet VLANS to be different from the subnet HQ voice phone IP VOice VLAn, it should be fine.

  Kind regards

  Mohamed

• Unable to access internet from the Windows client on the Linux host

  Host: Arch Linux, x 86-64, kernel 4.1.6

  I installed VMWare Workstation 12 on my Linux host and the installation seems to complete without any errors.  However, during the compilation of the modules of the core, a few warnings (which I think are safe to ingnore appeared).

  sudo modconfig vmware - console - install-all

  [sudo] password for ffhaddad:

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  do: enter the directory "/ tmp/modconfig-cR61EP/vmmon-only '.

  Using the kernel build system.

  / sbin/make - C lib/modules/4.1.6-1-ARCH/build/include/... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/vmcore/moduleloop.o

  /tmp/modconfig-cR61EP/vmmon-only/Linux/driver.c:1285:1: warning: always_inline function might not be inlinable [-Wattributes]

  LinuxDriverSyncReadTSCs(uint64 *delta) / / OUT: max - min TSC TSC

  ^

  LD [M] /tmp/modconfig-cR61EP/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  CC /tmp/modconfig-cR61EP/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-cR61EP/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  / sbin/make - ch. $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-cR61EP/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-cR61EP/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-cR61EP/vmmon-only '.

  make: entering directory ' / tmp/modconfig-cR61EP/vmnet-only»

  Using the kernel build system.

  / sbin/make - C lib/modules/4.1.6-1-ARCH/build/include/... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/driver.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/hub.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/userif.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/netif.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/smac.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/vnetEvent.o

  In file included from include/linux/pci.h:35:0,

  of tmp/modconfig-cR61EP/vmnet-only/compat_netdevice.h:27.

  from /tmp/modconfig-cR61EP/vmnet-only/netif.c:43:

  include/Linux/pci_ids.h:2251:0: warning: 'PCI_VENDOR_ID_VMWARE' redefined

  #define PCI_VENDOR_ID_VMWARE 0x15ad

  ^

  In file included from tmp/modconfig-cR61EP/vmnet-only/net.h:38:0,

  of tmp/modconfig-cR61EP/vmnet-only/vnetInt.h:26.

  from /tmp/modconfig-cR61EP/vmnet-only/netif.c:42:

  /tmp/modconfig-cR61EP/vmnet-only/vm_device_version.h:56:0: Note: this is the location of the previous definition

  #define PCI_VENDOR_ID_VMWARE 0x15AD

  ^

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/vnetUserListener.o

  In file included from tmp/modconfig-cR61EP/vmnet-only/net.h:38:0,

  of tmp/modconfig-cR61EP/vmnet-only/vnetInt.h:26.

  from /tmp/modconfig-cR61EP/vmnet-only/bridge.c:52:

  /tmp/modconfig-cR61EP/vmnet-only/vm_device_version.h:56:0: warning: 'PCI_VENDOR_ID_VMWARE' redefined

  #define PCI_VENDOR_ID_VMWARE 0x15AD

  ^

  In file included from include/linux/pci.h:35:0,

  of tmp/modconfig-cR61EP/vmnet-only/compat_netdevice.h:27.

  from /tmp/modconfig-cR61EP/vmnet-only/bridge.c:51:

  include/Linux/pci_ids.h:2251:0: Note: this is the location of the previous definition

  #define PCI_VENDOR_ID_VMWARE 0x15ad

  ^

  LD [M] /tmp/modconfig-cR61EP/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  CC /tmp/modconfig-cR61EP/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-cR61EP/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  / sbin/make - ch. $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-cR61EP/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-cR61EP/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-cR61EP/vmnet-only.

  Starting VMware services:

  Virtual machine monitor makes

  Virtual machine communication interface is

  VM communication interface socket family is

  File system is blocking

  Virtual Ethernet is

  Demon of authentication makes VMware

  Available shared memory is

  When I type lsmod | grep vm, I see the module running:

  57344 13 vmnet

  
  

  When I type: status vmware.service, I get:

  VMware.service - demon of VMware

  Load: loaded (/ usr/lib/systemd/system/vmware.service; activated; seller preset: disabled)

  Active: active (left) from the sea 2015-08-26 14:45:22 PDT; 1 h 14 min ago

  Process: departure from ExecStart=/etc/init.d/vmware 323 (= released, the status code = 0/SUCCESS)

  Main PID: 323 (code = released, State = 0/SUCCESS)

  CGroup: /system.slice/vmware.service

  August 26 at 14:46:21 silverstone vmnet-dhcpd [718]: 00 DHCPDISCOVER: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPOFFER on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPREQUEST for 00 172.16.156.128: 0C: 29:05:cc:e2.... se8

  August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPACK on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:46:27 silverstone vmnet-dhcpd [718]: DHCPINFORM for 00 172.16.156.128: 0C: 29:05:cc:e2 v..et8

  August 26 at 14:46:27 silverstone vmnet-dhcpd [718]: DHCPACK on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:52:31 silverstone vmnetBridge [589]: stop bridge eno1 to virtual network 0.

  August 26 14:52:34 silverstone vmnet-dhcpd [695]: select: interrupted system call

  August 26 14:52:34 silverstone vmnet-dhcpd [695]: get out.

  August 26 14:52:34 silverstone vmnet-dhcpd [718]: select: interrupted system call

  Note: Some lines were ellipsized, use-l to show in its entirety.

  
  

  All this leads to the issue of not being able to access the internet from within my Windows guest.  I can ping the host computer, but I can't access the internet.  I'm not sure of what could be the problem.

  I pulled up to the parameters of the virtual machine window (Ctrl + D), selected network adapter in the list of devices and changed the ball from NAT to bridged. After you save the settings, I booted the machine virtual Windows has detected a new network adapter, and after you configure it, I am able to access the internet.

• allow the exception of redirect permanently, from the firefox prompt "allow."

  Hi, is it possible to allow (as an exception (permanent) since this notice of redirection by firefox window?

  Workflow

  (1) redirections and pop ups are not allowed by default in my preferences

  2) allow Firefox shows me this option and I click? allow while I'm using this Web site

  (3) However, this site is a new forum I have just joined, so I prefer to be allow to add it as an exception permanently from this place. Please see screenshot.

  (4) rather I go to preferences, security, and add the exception in manually in the pop-up window. I think I did it properly.

  Thank you

  This function is very limited. It was designed as an accessibility feature to avoid any software screen reader to be confused by changes in context. It's terribly incomplete as a tool of security possible, because there are several ways to redirect and the functionality is only about some of them. And of course there is no way to make exceptions based on the site. If all goes well, there is an add-on that does what you need.

• I would like to know if I want to access another computer in another country via the internet, is it possible that I can use internet from the other computer that I am trying to access?

  Remote access over the Internet regarding:

  Hello

  I suggest you to follow the links and check out them.

  What is the difference between the remote desktop connection to remote and support Windows?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-difference-between-remote-desktop-connection-and-Windows-remote-assistance

  What is Windows Remote Assistance?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Windows-remote-assistance

  Get help with your computer using the support Windows remote

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-your-computer-using-Windows-remote-assistance

  Help someone with a computer using the Assistance problem Windows remote

  http://Windows.Microsoft.com/en-us/Windows-Vista/Help-someone-with-a-computer-problem-using-Windows-remote-assistance

  Windows remote assistance: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-remote-assistance-frequently-asked-questions

• Unable to connect to the internet from the computer laptop windows 7

  Unable to connect to wifi internet

  Hello

  My Sony VAIO laptop is connected to wifi and I can ping google.com, but cannot browse the internet; After a few messages I deleted all files from temp dir

  I have implemented security to min average but still impossible to surf; I have a problem: windows protection does not work, this may be the cause of the problem?

  Hello

  Thanks for the response back.

  I suggest you to reset Winsock.

  Follow the steps below:

  a. Click Start button and type cmd in the search box.

  b. right click on cmd.exe, and then click Run as administrator.

  c. press to continue.

  d. Type "netsh winsock reset" without the quotes to the command prompt and then press ENTER.

  Note: If the command is typed correctly, you will receive an error message. Retype the command. When the command is executed successfully, a confirmation is displayed, followed by a new command prompt.

  e. Type exit and press ENTER.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cannot ping sub interface from my remote site VPN gateways

  I can't ping my gateways to interface my remote vpn connection sub

  I can ping 192.6.1.0 network, but can't ping network 192.6.2.0 or 192.6.3.0

  When I remote desktop in 192.6.1.20 I can ping all the networks, including gateways to interface sub.

  I think that something in my asa is misconfigured or not added

  ASA NAT rules:

  Exempt NAT Interface: inside

  Source 192.6.0.0/16

  Destination 192.6.10.96/27

  Static NAT interface: inside (it's for the local NAT of E0/0 out)

  Source 192.6.1.1/16

  Interface translated outside the Destination: 172.35.221.200

  Dynamic NAT interface: inside

  Source: no

  Destination: outside

  ASA access rules:

  Permit outside

  Source: no

  Destination: out

  Services: udp, tcp, tcp/http

  Static routes:

  Interface: Outside > network: all outdoors DSL (shows no DSL in the graph)

  

  Some incorrect configuration:

  On the ASA:

  (1) directions are incorrect, the default should point to the next hop route, that is to say: the internet router: 172.35.221.x, as follows:

  Route outside 0.0.0.0 0.0.0.0 172.35.221.x

  ---> where x must be the router internet ip address.

  existing routes need to be removed:

  No route outside 0.0.0.0 0.0.0.0 192.298.47.182 255

  No route outside 0.0.0.0 0.0.0.0 172.35.209.81 in tunnel

  (2) the following declaration of the static NAT is incorrect too and should be removed:

  static (inside, outside) USSLTA01_External USSLTA01 netmask 255.255.255.255

  --> You can not NAT interface on the SAA itself.

  (3) for the SAA within the interface's subnet mask should be 255.255.255.0, no 255.255.0.0. It should be the same as the router interface subnet mask:

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.6.1.254 255.255.255.0

  (4) on the way to access these sub interfaces subnet on the SAA as follows:

  Route inside 192.6.2.0 255.255.255.0 192.6.1.235

  Route inside 192.6.3.0 255.255.255.0 192.6.1.235

  Route inside 192.6.4.0 255.255.255.0 192.6.1.235

  On the router, configure it by default route as follows:

  IP route 0.0.0.0 0.0.0.0 192.6.1.254

• Unable to connect to the internet from the second computer to the home network.

  One of my computers on home network has stopped working after a storm in which several circuits in the House have been triggered. The computer seems to work very well, and other computers on the network can access the internet by using IE 8. I replaced the ethernet cable and rebooted. No difference. In addition, I checked the Device Manager, which indicates that the ethernet card works fine. Any ideas on what's going on? Thank you.

  Right-click on command prompt and select run as administrator.  If you are using Windows XP, open the command prompt window.

  Type the following command-

  chkdsk /f /r and press enter

  You will receive a message about the disk must be locked and you want to run the scan on reboot.  Press y and press enter

  Reboot the system and go watch TV or read a book because it will take some time.

  Once the analysis is complete, open the observer Application event log and look for wininet.  The results of the analysis it will be there.

  To open Event Viewer, follow these steps:

  1. Click Startand then click Control Panel. Click performance and Maintenance, then click Administrative Tools, and then double-click computer management. Alternatively, open the MMC containing the snap observer of events.
  2. In the console tree, click Event Viewer.

     Application, security, and system logs are displayed in the event viewer window.

  Windows Vista: right-click on my computer and select Manage

  Start safe mode and check in Device Manager for yellow exclamation marks or brands Questions

• I recently resseted my Internet from the modem, however I think I lost the printer for network sharing.

  Please help, how to fix this.

  My laptop will not be printed, how to fix this? Also when I've reset, I used my other laptop to configure the internet connection. Also only the computer can print now, can't other laptops?

  Also, I'm new to this, so please explain it is as simple as possible thank you.

  The computer on which it prints is also old XP

  laptops are vista

  Help, please!

  Hi DmFrosty,

  ·         What exactly happens when you try to print? You receive an error message or error code?

  ·         What is the brand and model of the printer?

  ·         How many computers are connected on the network?

  I suggest you refer to the mentioned articles below and check if the network for all machines was set up as a result. See the following article:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

  You can also check the following articles to learn more:

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

   

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

   

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  Let us know the results.

• Could not open the Internet from the desktop shortcut

  original title; Problem with shortcut on Windows 7

  Today I bought a laptop and when I create a shortcut on my desktop its fine, but when I try to open a shortcut a box pops up saying... Unable to open this Internet shortcut. The "http" Protocol is not a registered program. What is c? and how can I retify it. Thank you very much

  Looks like there could be a typing error in your shortcut.  For websites, it must start with http://.  If not, this could be your problem.

  Good luck.

• My Internet from Verizon elements site to load not

  When you are connected to the website of Verizon my account and I try to load some links on the page, for example billing FAQ, I get, ' Bad requestYour browser sent a query this server could not understand. "

  jscher2000,
  Thank you!
  I did what you said above, and it worked.

  Warm greetings,
  Bud

• Cannot browse the internet from the start page. Used to be OK, not now?

  Nothing happens on this search page. It used to work fine until about a week ago

  Nothing happens.

  a your firefox profile reset everything works?

• Requirements for vSphere remote site replication

  I run 3 Enterprise 5.5 x vSphere hosts in A Site with vCenter.   I want to add a new host in a remote site and configure vSphere replication between them.  Issues related to the:

  • Do I need to vCenter in slot 2?
  • If vCenter Site of A is the Site management and hosts of the Site B and Site A goes down, vSphere replicated VMs can be restarted to Site B without problem?
  • Is there a risk to not have a vCenter dedicated to Site B on the changeover plan?

  Thank you

  -Matt

  Hello

  (A) If you have vCenter in slot 2, you will need to deploy device VR and match two VR UI sites.

  In the case where something happens to site A, losing vCenter and/or VR device, you can use vCenter and VR device to site B to perform a recovery after disaster and put in place the VMS to site B, inside of vCenter inventory B.

  (B) If you have no server vCenter in slot 2:

  1. There is no need to deploy handset unit of VR (embedded DB for server VRMS + VR + VRMS) for site B.

  2. you can deploy additional device VR-server only for site B, so that the replication traffic goes directly from the source ESXi to the correct server in VR.

  3. If the disaster arrives at the site, you must have vCenter Server and VRM in the combined unit of VR upward and running order to use the VR UI to perform a disaster recovery. If vCenter Server or VRMS manage warehouses of data target is corrupted/lost, the only way to recover after a disaster is to consolidate recovery replica logs manually rename and replicated configuration files and hope that consolidated records represent a coherent source VM instance. This procedure is subject, not officially supported, and care must be taken when building the redo logs, in order to ensure the consistency of the data in the disks of the virtual machine, not some partial block updates.

  Kind regards

  Martin