Training courses is not available

Similar Questions

• My podcast Astrophiz not available in Australia

  Podcast argued, had received the e-mail from the approval, but when I click on the link provided a popup says "the object you requested is not currently available in the Australian store.

  I just connected to iTunes connect and my podcast feed is 'Active', not 'hidden '.

  I just have to wait, or is there an other action I can take?

  Thank you

  Brendan Astrophiz

  This message means in general that's not available everywhere. Certainly to research on "Astrophiz" does not produce any results in the United Kingdom, although it is not conclusive that research is often slow to activate; of course, I can't verify news without the URL of your store page that appears in the acceptance e-mail.

  If you have just to receive the email, it is quite possible, that it did not in the store again. I don't know what is the usual turnaround time, but you should probably give it a few days.

• Firefox has incorrectly disabled to update Flash to be exceeded; wants me to install an older Flash not available.

  Train to start a new PC Windows 7 (64 bit) today. 11 Firefox usually works very well. I used Firefox to install Flash 11.1.102.63, that is what is recommended for my system to adobe.com/software/flash/about.

  YouTube works, but when I load a page with a. SWF file, which appears is 'a plugin is required to view this content. Install the plug-in... "and by clicking it launches the Plugin of Firefox's Search Service. This window helps me to install Flash 11.1.102.62 (note the last digit), which of course is not because Adobe refuses to provide an outdated version.

  Firefox Plugin Check says: "for your security, Firefox has disabled your outdated version of Flash. Please install the latest version. [link to the adobe.com site] "it is a simple matter of Firefox mistakenly thinking this Flash version is obsolete." He's trying to force me to install what he thinks, this is the current version, but this is incorrect and impossible.

  You probably install the x 64 version of Flash, which does not work with Firefox because it is a 32-bit program. Download and install Flash of http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exeand see if it works.

• Training time does not display correctly

  Hello!

  Yesterday I went for a 5 km walk with my children. It is displayed correctly in "all drives", 01:01 hour, 5.01 km, puls averages 113. My daily goal is to workout of 30 minutes / day. In 'history', the same day that it is said that I had 25-minute workout (and I ain't upstart mycket objective). Anyone who knows why?

  Hello

  Progress toward your goal of daily exercise of 30 minutes of credit, the activity app aims to identify the activity equal or exceed the intensity of 'fast market '.

  It is possible that only the parts of your walk meets this requirement.

  The definition of a brisk walk varies from one person to another and depends on your personal information.

  To verify that your personal information is accurate - and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  During general daily wear and during training when the pair iPhone GPS data are not available, the application of activity relies on your movement of arm (measured by accelerometer) to track the movement in order to progress towards the goal of the exercise of accounting. For best results, let the arm on which you wear your watch to swing naturally as you move.

  Calibrate your watch also helps to improve the accuracy of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• Funtioncality of Direct3D is not available

  Hello

  I have recently returned to the country, after about 3 years and booted up my desktop PC.  of course, updates were needed to play games and others.  However, after that I updated my drivers, I couldn't load any program requiring 3D acceleration.  When I checked DirectX Diagnostic, I got the dreaded "Direct 3d feature is not available.  You should check that the driver is a final version of the hardware manucfacturer. "I use a Sapphire Radeon 9600 Pro (128 MB), and I have the latest drivers for my chipset/MoBo drivers that Ali and directX.  I even updated my Bios!  I contacted AMD and was only told to update everything.  So yes... now I'm here... Please help!

  Graphics accelorator is completely to the right.

  have you tried to turn the combination of Scripture

  I can't turn on direct3d that everyting associated driect3D is gray and impossible to be in a hurry.  the only button option is to "test the direct levy.

  I even tried the trick with NetMeeting

  Windows XP Pro

  Sapphire Radeon 9600Pro uses the legacy 10.2 drivers

  Ali/Uli chipset using the last pilot 2.20 (from nvidia)

  Falshed BIOS with the updater AMD (which goes until 2003)

  running an AMP Athlon (tbird?) clocked at 1.6 ghz with 1 GB of ddr Ram on an Asus 1535 D + chipset

  Monitor: Samsung SyncMaster 731B

  I would be grateful for any suggestion that might me useful!<3 thank="">

  Have you tried to launch the DirectX diagnostic tests, DXdiag.exe (-R,dxdiag)?  The "DirectX files" tab will show you the status of your files and you can also test the functionality!  If it detects problems, you can runDirectX end-user Runtime Web Installer.  DirectX is integrated with Windows® XP, you can run it in any case to keep it updated , please Vote if you find it useful!  Please, click on Brand or mark as answer if that answered your question!

• speech recognition - "this command is not available now"...

  I have windows 7 with office 2010 and when I try to say commands, such as select Word or correct the word or ordering another new paragraph I receive a message of this command is not available now... when it will be available? also, when dictating a sentence, if I stop it capitalizes the next word in mid-sentence... How can I fix that? and don't forget that I can't use the exact word or select Word... it took me twice as long to make this letter with speech recognition, of the type just... I read on these forums, I googled to death and please please please do not direct me to another forum... I set up my micro I did the tutorial and additional training, I looked over the options and others and I can not understand how to fix... the exact same question was asked and the person who answered just said set up the microphone, the tutorial and the additional training and as many links to forums... I clicked and traveled all the links and the answer may seem not available as to why my speech recognition accepts not my orders... Please answer and if you don't know, don't send me on a forum's wild-goose chase...

  The solution to your problem is to click the speech recognition microphone, first before you open Word.  Once the speech recognition is started, right-click it, click options, select Notepad of dictation and then open Word.  If you do it in this order, everything should work correctly in Word.  Notepad will not come to the top.  The command everything will work directly in Word itself.  If you open Word first before the speech recognition and do not have Notepad - "command not available" will come.  I hope this helps.

• Try to restore the files after replaced HD, 'backup location is not available' despite having backup full

  New HD installed and have all my backup files. When I use files restore - advanced restore - they are on an external hard drive, it is said first that the backup file is not available, although I can see all the files on the hard drive. Then asks me to create an account with the same name that my old account, she wants one with a / symbol in there, but said then I can't use symbols. The only way I can get the files to cross is to choose a different location to save in but then of course they are not anyone is easy to use... I would like that all of the images in the photo file, all the music in the music file, etc..  Also as I have many back ups I don't know which of the back ups to install - latest seems to have only the files that have changed since the last backup... what I need to install the oldest and the newest? or all of them? and I'm supposed to now spend hours finding all files and moving them to the right places? Guess that's what an automatic backup system was supposed to avoid...

  You use the option "files from a backup made on a different computer? Although it is the same computer, the fact that Vista has been reinstalled means that it may seem as if it isn't.

  The DELL PC anne/anne account that is specified is actually the name of the computer before the slash, is anne DELL PC and the user name after, Anne. The computer name was changed when has been reinstalled Vista?

• LAN adapter is not available. Pavilion 15 P032ND

  Dear HP,

  I recently bought this laptop and it has been amazing so far. However the ethernet LAN card is showing is only the network WIFI works fine but the LAN adapter is not available. Even in Device Manager is not there. I installed an SSD, so I'm on a new install with no HP Recovery Manager but the LAN has been working well for 2 weeks before he disappeared.

  There are a few features unknown in my device manager that can be. When I install the LAN drivers from the HP site but it says that no adapters were found.

  What would be the best course of action to get this feature. I can't go without the LAN because I use this laptop as my office with the lid closed. And the WIFI does not work when the lid is closed.

  Of course, this is very strange!

  Just for fun, remove the Intel wireless card and see if the ethernet adapter shows.

  If not, I would say that you had a fortuitous failure of integrated network interface, and you should contact HP for technical support under the warranty.

• REFERENCE DELL 2335 MFP SCAN "NOT AVAILABLE".

  I have a Dell 2335 MFP printer that is connected to a network with 3 2 pc from work of the pc quite well and we can however scan other pc which is configured in the same way is not when to choose the pc that you want to scan to it says connection after what it says "not available".

  I unintstalled and reinstalled the drivers making also of course all is selected I also checked the firewall that is well

  someone at - he had this question?

  Hello

  I had the same problem and I spent all day trying to figure this out! Not only have I had this problem I ended up having problems of firewall that caused the problem to take more time.

  in any case, this is how solve you the problem for 64-bit windows 7 computers.

  Panel control--> system and security--> firewall Windows--> (allow a program or feature through Windows Firewall)

  You must add "Manager of Scan" and give him access to the host/network (private), Public domain.  ALSO

  ScanMgr2.exe should already be in the list, and it grants the same privileges.

  I don't know if that's all you need to do, but when I tested it, I gave Sscan2io.exe and SScanToIO access to all 3, I've been able to connect.

  (I was unable to delete the access of these two Home/network & public after test with access, so I recommend that you try it without giving the permission first!)
  NOTE: Disable the firewall does not solve the problem!  Firewall had to stay.

  Hope this helps you all.

• Windows 7 home upgrade to windows 7 pro says that's not available?

  I can't use my anytime upgrade windows 7 home to windows 7 pro, I said that's not available.

  What can I do to upgrade to windows pro

  Microsoft sales ended for Anytime Upgrade and licensing of retail in October 2013. Otherwise, your only way to upgrade is by purchasing the retail full version or upgrade Windows 7 Professional license and use it with the wizard upgrade Express Windows 7 home Basique/Familiale Premium. I just checked amazon.com and all the licenses that I see are copies OEM System Builder:

  http://www.Amazon.com/Microsoft-Windows-7-8-software/b?ie=UTF8&node=1286119011

  This means the boxed retail copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  If you can get a copy of a retail license, you can do the following:

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

• BlackBerry Smartphones BlackBerry App World 1.1 - "this application is not available...". »

  Model: Curve 8330
  OS: 4.5.0.77
  Carrier: Verizon

  I could solve my problem connecting to App World 1.1, the question I meet now trying to download apps. I get the message to follow up on any application that I click:

  "This application is not available on your device or for your business.

  Example: I clicked on the Facebook app (I know who works for the Curve 8330) and got the msg indicating it is unavailable.

  I tried uninstall/install troubleshooting number App World 1.1, but that has not solved the problem.

  It's very Irdawg!

  If you get a chance, could you let me know about the issue of Center of applications?

  Thank you

  Bifocals

  On the Curve 8330 with 4.5.0.77 OS, there is not an Application Center (I only saw him on storm of my boyfriend).  On the curve OS, App World is displayed with the rest of your applications, unless of course you put it in a special folder.

  I guess that the Application Center lights v4.7 + Storm, Tour, etc.

  I guess there is no solution for the user about the msg below:

  "This application is not available on your device or for your business.

  You'll just have to wait until the Blackberry it corrected on their end (server side).  A few apps is showing download rather than show this msg today vs yesterday, I noticed.

• BlackBerry smartphones can't pass purchased apps "not available to download from BB App World"

  Well, I just don't get this one.  This problem has been irritates me for some time... the upgrade to App World V2 makes no difference.

  I have an opinion on App World that a couple of my purchased apps are available updates.  I connect with my BB ID and access the App World page and click on the upgrade link.  App World tells me that the application already exists, I want to replace version 1 with version 1.1.  I hit 'yes '.  The bar and download activity starts... and a second later he tells me "[the app] is not available for download from Blackberry App World."

  What happens on two of my apps.  I can download free applications and install them correct, but for some reason, the updates fail as described.  I tried to delete an application and reinstall it from scratch, but that failed too with the same error message.  The apps most definitely those there _are_ on App World...

  Oh, and Yes, I did a battery [often] pull closed and open App World [also several times] as well as removing and reinstalling the App World [V1 and V2].  This behavior has persisted also leave before my last OS update.

  Bold 9700 on Bell Mobility OS 5.0.0.86 2.   BIS user

  I would of course appreciate all solutions...

  Good... thanks to a tip I had on another forum, I created a new BlackBerry ID with my old password and e-mail address, as my old PayPal information.

  After doing that I could download my app to the point dead and all updates seems to be well... my license and registration of data carried over the new code.

  I don't know if this will fix the other problems, but it seems to have worked for this problem... it's another avenue to try before making a lot of their removal and in all cases.

• UTL_MAIL works do not, but apex_mail... any ideas? (SMTP transient error: 421 Service not available)

  Start

  () UTL_MAIL. Send

  recipients = > ' [email protected] ',

                 sender       => ' [email protected] ',

  subject = > "this is an issue."

  message = > 'This is a message');

  end;

  ORA-29278: SMTP temporary error: 421 Service not available

  ORA-06512: at "SYS." UTL_MAIL", line 654

  ORA-06512: at "SYS." UTL_MAIL", line 671

  ORA-06512: at line 2

  Start

  apex_mail. Send

  (

        p_to       => ' [email protected] ',    

  p_from = > ' [email protected] ',  

  p_subj = > 'this is a topic. "

  p_body = > 'This is a message'

  );

  apex_mail.push_queue ();

  end;

  Works very well.

  (of course, I use the correct recipient/sender names).

  For what it's worth, I have a second server with the same ACL settings and utl_mail is working on that one, but I don't know what is different.

  Any help much appreciated.

  You will get an ORA-29278 if you smtp_out_server instance parameter is not assigned to a working SMTP service.

  --

  John Watson

  Oracle Certified Master s/n

• Not available in Solaris 11.2 nested virtualization

  Hello!

  Anyone know why virtual hardware virtualization is not available for my guest 11.2 Solaris?

  I want to be able to use the kernel of Solaris zones.

  The host environment:

  SuperMicro A1SRM-2758F, 32 GB of RAM

  ESXi - 5.5 (build 2302651)

  I know that the CPU (Atom C2758) supports the VT - x and EPT which is required for 64-bit virtualization nesting

  And navigation:

  https://MyIP/mob/?MOID=HA-host & doPath = Capability

  Show me the (unsupported) feature is available:

  nestedHVSupported

  Boolean

  true

  I have created a virtual machine with vHardware vmx-10, selected "expose hardware assisted virtualization to the guest OS ' and installed Solaris 11, 2 as a guest.

  I also checked that "vhv.enable ="TRUE"' is not found in the vmx file."

  But since the kernel of Solaris box comments are not available:

  # virtinfo

  NAME CLASS

  VMware courses

  -area support

  # uname - a

  SunOS 5.11 global1 11.2 i86pc i386 i86pc

  Anyone have ideas why this is not available. Worked fine in VMware Fusion.

  Best regards

  -Morten Hermansen, Fanitas Green

  I think I found it.  11.2 Solaris dislikes apparently the model and the progression of your CPU Avoton.  If I change the model and execution of my Haswell system to match your Avoton, I lost also for areas of kernel comments in my Solaris 11.2 customers.

  Try these configuration options:

  featMask.vm.cpuid.MODEL = Val: 0x3c

  featMask.vm.cpuid.STEPPING = Val: 0 x 3

  That will give the impression that you have a processor Haswell (at least to the extent where the model and progression are concerned).