Trancsend 160 GB HDD not detected

Similar Questions

• Satellite C650: HDD not detected after factory reset Toshiba

  Hi guys n Gals.

  Any input on that would be great.
  Its a PSC08E Toshiba C650

  Recently, I restored my system to factory settings using the Toshiba recovery partition. Everything was fine that I had installed Windows.

  Was on the desk, he began to install all programs and Tosiba players when he first started to install face recognition. It froze for 5-10 minutes and closes.

  
  I restarted my computer, a message me saying no boot device. Restarted and went into the Bios.
  No HARD drive detected.
  It seems if i enter Bios then save and exit. (Which makes the computer restart) BIOS detected that's fine.

  First of all, I thought it was a bad installation and a format would work. So I did.
  This time with the win7 installation disc. Same thing got on the desk, except the toshiba didn't install the drivers themselves. I went on the toshiba site and installed the relevent drivers currently work fine I use it to type this message now.

  Whenever I turn on a stop I have to enter and exit the BIOS.
  I have upated the Bios, I did not have a recovery CD. (Is this different from download the drivers after a new installation?)
  I would like to buy one, but they were quite expensive, one I need is £30.

  Not quite sure how works this forum, if there is a reward system that I will not fail to keep,
  Desperately need some help here. This is driving me crazy

  Ok. The first thing we do is to get into the BIOS, set it to default settings and check its operation. I think the HARD drive should be recognized correctly and you should be able to start the laptop without entering the BIOS.

  Now after the installation of clean operating system you can not install the HARD drive recovery image. What you need now is the original recovery disk. I put t understand why you didn't create where everything was OK.
  Anyway, the new recovery disc can be ordered on https://backupmedia.toshiba.eu/landing.aspx

  If you want to keep your version of the OS install all the drivers missing, tools and utilities more. You can download them from the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  If you need more assistance you are welcome.

• DC7700 Converible minitour: HDD not detected, windows does not load

  Hi, I have this computer running Windows, but Isaw today it shows no disk system error. I replaced the cables, I ran the HP Vision Diagnostic test and saw that it shows errors in the extended SATA Firmware tests-, error code is 990518 and the failure code is 503. SATA seq check test displays error code 990161 and error code 502 parameters test not valid. SATA random performance test fails also to 1% as the other two and also 990161 and 502 times as codes respectively. Should I change the hard disk or there might be an error in the BIOS or the system itself? Thank you.

  Hello

  According the information that you posted in your other posts and this post, I suggest you replace the hard drive.

• HDD not detected?

  1. WIndows 7 wasn't loading. After the Dell logo, it showed error (error PXE - E61: Media Test Failure).

  2. I tried to recover / format the windows. But then he showed driver load errors.

  3 then I went to the command prompt and run list disk. It is just to show my bootable USB key but not my internal hard drives. (display without media).

  Help, please.

  Hi Amit,

  Thanks for posting your query in Microsoft Community.

  Try to set the following parameters in the BIOS and check that it works.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  a. disable the Secure boot

  b. activate the legacy ROM load option

  c. under Startup, list options enable the legacy

  Also, try to connect the hard drive to the other port in the motherboard and check if that helps.

  Additional information:

  Start Mode UEFI or Legacy BIOS mode

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• New SATA HDD are not detected on PowerEdge R710

  Hi guys,.

  I have a PowerEdge R710 with the reference number below

  Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code:

  ADMIN NOTE: kidnapped by the Express service code privacy policy >

  I have 2 x 750 GB SATA HDD that are not detected at boot of the server. Obviously, the installation of Windows Server 2012 is not possible because it does not find any drive installed in the system

  Please help as I am new to the hardware configuration.

  Thank you in advance.

  You must configure RAID first. If you use the RAID S100 controller on board, it is not compatible with 2012.

• Satellite Pro L300 - HDD is not detected

  My Satellite L300 hanged while I used it. I tried to restart, it just wouldn't start. It shows this message on the screen "no bootable device-insert boot disk and press any key" tried, but it still does not work. Then I tried using the restore disc. It then displays a message on the scree that the hard drive is not mounted which means that it does not detect the presence of the HARD drive.

  What can I do?

  Hey,.

  This looks like the HARD drive is not recognized, so your computer isn't able to boot and disk HARD recovery doesn't work correctly

  I recommend you check the BIOS if the HARD drive is recognized correctly. Usually in the BIOS, you should see the correct HARD drive model number and it would mean recognized s. Otherwise, the HARD drive is faulty and must be replaced

• Tecra S3 - HDD was not detected during the intallation of win7

  Hello

  I have Tecra S3 PTS30E, serial No. is 17023153 H.

  Now installed windows xp, I want to install Win7, but the HARD drive is not detected during installation. Windows xp works with this HARD drive.

  Why this problem?

  Please help me on this problem.

  Hello

  Tecra S3 supports RAID. Therefore, you need to install the RAID driver
  When installing XP, you will need to press F6 to add the RAID driver.

  Here the driver I found on the page of the European driver Toshiba

  [Driver RAID Tecra S3 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 195 & selSeries = 335 & selProduct = 596 & STAS hortMod = 431 & language = 13 & selOS = 10 & selType = 262 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 262 & page = 1 & ID = 43966 & OSI D = 10 & driverLanguage = 42]

• Satellite M105-S322 - HDD does not detect

  My laptop does not detect the hard drive. I press F2 to go into BIOS and it says hardrive No. I reinstalled the hard drive, but it still says the same thing. I have test the SATA hard drive on the desktop and it detects its.

  What seems to be wrong? Help, please.

  > I have test the SATA hard drive on the desktop and it detects its.
  This looks like your HARD disk on the motherboard controller is faulty
  But before that you exchange the motherboard but I would test another HARD drive maybe the HARD drive is faulty and will recognize only on certain computers or mothers.

  If a new drive HARD doesn t work too, your motherboard needs to be replaced.

• Wk2 will not detect the HDD on Portege 3480CT

  Hi all, been tring this for 2 days now and I have no idea. I want to install win2k on 3480CT but the win2k installation does not detect the hard drive... It will detect WinXP, win98 detects...

  I have the latest version of the bios, I start to think win2k is in need of a driver for the reader, but I'm not finding.

  Help...

  As mentioned for install the W2k you n t need additional drivers.
  I also recommend the HARD whole disk formatting and delete all partitions.

  In addition, you must use an original CD of Microsoft W2k. I read on the net that some people wanted to use the copy of the CD W2k, but this CD is not bootable.

• Re: Hitachi Drive Fitness Test (DFT) does not detect the HDD on Satellite A660

  I have a Toshiba Satellite A660 PSAW3C-047017 with a HARD MK6465GSX Toshiba drive. After experience, some consecutive failures of start-up, I was told on the Toshiba forums to use Drive Fitness Test (DFT of Hitachi).

  I burned the ISO to a CD and booted from it (I must press F12 for boot options and select the optical drive), which is to run successfully. However, it does not detect my drive HARD - the list is empty.

  Is there something I need to do to make visit to DFT?

  I cannot commend this third part software features, but I want to know if you still have these failures to start your portable computer satellite?

  What's the problem?

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• Satellite L300D do not detect ODD and HDD

  My laptop does not detect an optical device and the hard disk?

  Can you put more than one sentence?
  Since when?
  If you have changed something?

• Installation does not detect 2nd HDD in NMH305 THAT do not

  Hi all, tried searching but without success.

  Just took my Media Hub that comes with a 500 GB HARD drive.

  Tried to install a 1 to HARD drive I had cannibalize my Seagate FreeAgent desk but it does not detect my NAS.

  I missed a step of configuration somewhere?

  Any help is greatly appreciated!

  TIA! =)

  Try to erase/delete all existing partitions on the hard drive 1 TB before putting it inside the mediahub, if it has been used before inside the FreeAgent Desk then there is another system of files that understand not the mediahub.

  See you soon.

• Drive external DRIVE not detected after update of the Sierra

  I upgraded my Macbook Air Sierra this morning. Since then, whenever I plug in my external Seagate HDD, it is not detected in the Finder, or see a shortcut on the desktop. However, it is visible in disk utility.

  I connected the HARD drive even air to my friend Yosemite running, and it works as usual.

  How the drive is formatted?

  Post a screenshot of what you see in disk utility.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.