transfer files from the hard drive to laptop: access denied?

Similar Questions

• When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

  (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS

• How to extract the files from the HARD drive?

  I have a HDD1805 from a broken iPod 80 GB. I was wondering if there was another method I could use to extract the files from the hard drive.

  Hello

  Sorry, but I don t know what you mean exactly.
  Can you please explain exactly what you mean?

  What files you want to extract?

  Good bye

• transfer files from the old drive hard windows 7 to new computer windows 8

  My old laptop windows 7 crashed for an unknown reason, so I bought a new laptop with windows 8. I removed the hard drive from the windows 7 machine and using an external enclosure card connected to the new laptop.

  I can see and open any public folders in the folder of the user data, but can not access a user folder. Also when I right click on the folder of the user, it seems that they are empty.

  I have tried making the appropriation and unchecking hidden files but still no luck.

  Pretty frustrated right now.

  I think I solved the problem.

  I had to do a right-click on the folder user and copy and paste in a new folder. While he was doing that he clean up some data. Don't know exactly what was going since I wasn't there when it happened.

  Once he went through this process, I could see my user files to the new folder and the old hard drive.

  Sorry I can't explain it better.

• Satellite L40: How can I recover the files from the hard drive

  Hello

  Can someone help me please. About a week ago I started to have a clicking sound coming from my laptop Satellite L40. My laptop froze and when I restarted, I was directed to the system configuration with a message at the bottom saying
  "Pri Master Hard Disk Drive SMART status bad, Backup and replace."
  Press F2 to assume. »

  I pressed F2, but I don't have any idea what to do?

  Can someone tell me how do I backup my files until my HDD disappeared completely or if it was can I use another device to get down them.

  I tried using the recovery disk, but the disk does not respond?

  Help, please

  Pete

  Hello

  This message looks like a warning of S.M.A.R.T. notification
  This means that your HARD disk will eventually fail.
  It can happen in the next few days or it can't happen for a few months but the SMART feature has detected that the drive is wrong then it should be replaced as soon as possible.
  It seems that your laptop is not very old, so the warranty should cover all replacements.

  I see only one way to access and back up the data. Eventually, you could buy an external enclosure SATA USB HARD drive and was able to connect the HARD drive to another computer.
  I don't know if you will be able to access the HARD drive because of the failure, but if you want you can try this m.

  Good luck

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• How can I get all the files from the hard drive in the non-working Compaq Presario CQ62-411NR

  Ice tea seep keyboard laptop, and after drying it feeds on. If I try a hard reboot, it is stated that I would lose all the info in the memory and I can't afford to lose my mother pictures that are on the hard drive. Is it possible to get the hard drive to work in some other way so that I can get my photos and other files.

  You can remove the hard drive and put it in a USB Enclosure.Plug USB port, another machine, where you should be able to go through it and copy your photos off on the hard drive of the host computer.

  Example:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3743052 & catid = 2783

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• How can I transfer files from a hard drive on a second hard drive on the same computer

  My 150 G hard drive is full - I installed a second drive hard 150 G and need to download my original hard drive

  My 150 G hard drive is full - I installed a second drive hard 150 G and need to download my original hard drive

  First of all, note that "Download" isn't really an appropriate word.

  Moving files from one disk to the other does not differ from moving from one folder to another folder on the same drive. There are several ways to do so. The two most common are:

  1. copy / paste

  2. open the source and destination in two instances of Windows Explorer (or my computer) and drag and drop from one to the other.

• How can I move files from the hard drive of your computer to external hard drive.

  Original title: can I add an external hard drive to transfer music from windows media to free up space on the top of the Tower

  with windows media player to manage two mp3 players, running out of space on the top of the Tower, can I transfer and store all the music files on an external hard drive of 1 TB and use windows media player with the external hard drive?

  Hi PaulDocherty,

  I suggest you follow the methods given and check if it helps.

  Method 1: Please run the synchronization in your Windows Media Player.

  Please visit the link below to make a synchronization in your Windows Media Player;

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  Method 2: You can also try to copy and paste option.

  Please visit the link below to copy files to your files on an external hard drive;

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  I hope this helps.

• Reserectes from long deleted files from the hard drive Windows 7 Pro.

  Long very old files deleted, appear in My Document (files not necessarily the original). Repeatedly remove them, using a shredder program, they always appear. I wonder if the problem will be resolved to a clean install.

  Programs may not be transferred.  They must be installed again from your record source or internet downloads.

  Data can be transferred to a new system.  The best way to do this is to copy the data from your drive to be replaced (assuming that he still works) on a disk hard external - that's what you should be backup anyway - then, after your system is rebuilt, you can transfer data from this external storage on the disk.

• You need to remove all files from the hard drive.

  Original title: I need to empty my drive hard so that I can reinstall windows XP - I bought new computer and put my old one family member...

  I don't want my personal info on my old computer.  I was told to empty / delete (?) my hard drive, then reinstall

  Windows xp from the operating system CD.   Even if I throw the old computer, I want all the info removed for security all

  suggestions?

  Hello

  Please take a look at the following article:

  Protect and serve your personal files

• How to remove unnecessary files from the hard drive using Lightroom.

  Hello

  I use Lr 5.7 on Win7 64-bit. I would remove completely some old files and their contents that were part of my previous, very messy organization. I still have parents and masters images files, so I have no need extra junk on my hard drive.

  I tried to do a right click on the file, but the only option is to delete the catalog. I saw posted solutions that say click on icon less. I don't see an icon less anywhere. As far as I know, Lightroom really doesn't want "delete me" anything.

  Thank you!

  Dave

  have you tried to delete images? You can't delete the folders...

• I had a laptop get wet, now I have a new and need to get files from my old drive guard saying access denied what can do

  I have my hard drive in an external case and need to get my files out of it

  Type access denied in Help and he will tell you.

  --
  ..
  --
  "Brian K Thompson" wrote in message
  News: e1472a05-1e4f-425f-88da-7fcb44678cfa...
  > I have my hard drive in an external enclosure and need to get my files out of it

• Transfer files from the flash drive to Windows 7

  I am using a USB to transfer my music from iTunes on my old Mac OS X (10.5.8) to iTunes on a new PC running windows 7. The only way I was able to do so far is one song at a time as there is no option "select all". I have more 5 000 songs. It is good to be a better way. Help?

  Not sure I'm totally. Where (in what type of program) is there no option "select all"?

  I am not sure, but it does not help? - http://support.apple.com/en-us/ht4527

  If his copy an iTunes iTunes, you may be better to ask Apple - support https://www.Apple.com/support/