Transfer files to and from Simulator?

Similar Questions

• How to speed up the transfer of files to and from data warehouses ESXi

  Hi people!

  Our company has a large number of

  VMware ESXi 3.5 and 4.0 servers. (Note: this is not the free ESXi, the)

  Paid ESX Server.) They generally work very well for us. The only area of

  problem I have is to transfer files to and from data warehouses on

  the machines.

  Because we do not have the ESX Server paid, I can't

  use vMotion or VirtualCenter to transfer virtual machines from one location

  to the other. So, if I need to move a virtual machine to a different host,

  the only solution I have is to download the VM

  files of the database on a local or network drive and then download

  paste them into the new data store, using the vSphere Client. The problem

  with this is that I found it is extremely slow. This may take

  hours just to copy a virtual machine.

  Does anyone know of one

  best way to do that would reduce the transfer time?

  Thank you!

  -

  Tom

  Hello

  Use veeam fastscp 3.0 its freeware. You can connect n number of esxi server.

  You can move or copy directly from one server to another server...

  Concerning

  Senthil Kumar D

• How to get the files to and from the host

  Is there something that I can read which explains how to get the (ftp, memory stick or other) files to and from the host?

  Sorry if this is a noob question, I looked but could not find something specific...

  There are many ways of doing so:

  1 activate not supported ssh and scp use

  2. use VI Client access to your storage space on configuration files and server transfer

  3 configure the iSCSI or NAS to deal directly

• Windows 7 repair installation block @63 % "transfer files, settings and programs."

  I tried to upgrade Windows 7 Pro to Windows 10 Pro (64-bit), but was an error 0 x 80070570-0x2000C.  I just tried a repair of Windows 7 installation (so that I could try again to upgrade to 10), but the process is suspended to 63% for more than two hours.  On my machine I can not get a prompt with SHIFT + F10, so I rebooted the machine, and he is back to the previous configuration.  The last few lines of the C:\$WINDOWS.~BT\Sources\Panther\setupact.log are:

  [0x0803df] adding MIG direct mapping of HKU for HKEY_USERS (R/W)
  2016-08-12 15:49:40, info [0x0803e1] MIG correctly mapped HKU
  2016-08-12 15:49:40, WOW_Redirector MIG Info: fixing CWow6432PathRedirector
  2016-08-12 15:49:40, the State of MIG data [0x08040b] warning store calling CoInitializeEx failed in partitioned mode. (hr = 0 x 80010106)
  2016 08-12 15:49:40, info [0x08040e] MIG State data store is available.
  2016-08-12 15:49:40, warning data MIG GAC [0 x 080262] store calling CoInitializeEx failed in partitioned mode. (hr = 0 x 80010106)

  Anyone have any suggestions on how to work around this problem with CoInitializeEx?

  I suggest that you download and create a bootable copy of Windows 10 from a work computer, and then perform a custom installation.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a customized Windows installation

  Step 3:

  Recover personal files from the Windows.old folder, such as pictures of Documents and Windows Live Mail emails in Windows 10

• Transfer files Word and Excel for Windows 98 to Windows07

  I have an old computer with excel and word files running on Windows 98. I recently got a new printer that does not work with Windows 98. So, I tried to transfer these files on my laptop that runs on Windows07 using floppy disks and external floppy drive. The laptop cannot load old files. I checked the floppy drive by downloading and uploading then laptop Excel and Word files without any problem.  When I try to download an old file I get a message asking me to format the drive, which then clears the file. After formatting the drive and by downloading the file again, I get a message saying that the file may be damaged.

  Someone had a similar problem that could help me please.

  Thanks and greetings

  Phil Richardson

  If my suggestion fails...

  You can also try:

  Connect the floppydrive to your old PC

  Move ALL of the files on the diskette to the old PC

  Unplug the the old PC floppydrive

  Plug it into the new PC

  When it ask to format, then do it - you erase anything on the floppydrive, because the files are safe on the old PC...

  After formatting, disconnect the new PC floppydrive

  Connect it to the old PC...

• Windows 7 upgrade reached 60% and hangs to "Transfer files, settings and programs."

  I'm upgrading from Vista Home Premium to Windows 7 Home Premium, but it keeps hanging from 60% - right where it transfers files. The upgrade can go back to Vista, but the problem continues to be whenever I try the upgrade.

  Hi Mark,

  Your newspaper seems similar to what others have seen in that installation appears to hang shortly after the migration of information from Intel, so I think it's a good bet to try the following steps.

  I've included a link to another thread so where it worked so you can see how similar the other user log file is yours. I would go a little further and suggest that you update all software/Intel drivers on your system.

  Here is the link to the other thread:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/b07c228b-3433-4B11-b4e9-b834c15ac2ab

  I hope this helps!

  Dan

• New computer: how to transfer files, including vignettes from old computer to new.

  I'm getting a new computer and you want to back up my files including thumbnails

  and transfer them to the new computer.  What is the best way to get all the information of the

  Organizer on the new computer?

  Thank you.

  The best way is to use an external hard drive or other removable storage.

  Open the Organizer, and then click the file > catalog Back-Up (or Ctrl + B) and make a complete back-up.

  After you install the software on the new computer, open the Organizer, and then click file > Restore Catalog.

  http://kb2.Adobe.com/CPS/402/kb402894.html

• Implementation of a transfer without control and the Simulation Toolkit function

  Hello people,

  I'm working on the implementation of a control system for a thermal cycler. And for that, I need a regulatory PID feedback loop and a feedforward controller that reduces the load on the feedback control loop. We were able to implement the PID loop without the box tool (using shift registers and others) but I don't know how to implement a controller feedback whose transfer function I [(35s+1) /(0.0001s+1)].

  Can I use a formula node and to implement with a C code? I don't know how to do this in c either.

  Any help is appreciated!

  Thank you!

  sirius18

  Hi sirius18,

  You can use the formula node to perform the calculations that you mentioned, but it is not C code run.  However, the syntax is similar.  Here is some information on put a formula into a knot of the formula:

  Formula node (help documentation) - http://zone.ni.com/reference/en-XX/help/371361H-01/lvconcepts/formula_nodes/

  Example - http://zone.ni.com/devzone/cda/epd/p/id/3058

  For those who prefer C, we can write their code, create a DLL and then call their C function using a knot of library function call:

  Call library function node (help documentation) - http://zone.ni.com/reference/en-XX/help/371361H-01/glang/call_library_function/

  Tutorial (presentation) - http://www.ni.com/white-paper/3009/en

  Example - http://zone.ni.com/devzone/cda/epd/p/id/1513

  I hope this helps!

  Kind regards

• Copy files to and from the PC problem

  No device

  When I Pug in the USB for PC cord, Win7 says that the device must be formatted first. The manual never mentions this possibility and the formatting from sounds pretty bad to me, unless there is a partition on the device, isolate this action.

  Can anyone help on this?

  Well, I spent $ 14.95 and enlisted the new, I think, support for WebOS. Last week I had live free chat service, but his week that they told me

  In any case, I was directed through telephone conversation to due a full erase and which leads to a re-formatting of TP.... with no harm to the BONE, and restore your apps, etc. the HP backup system handles it for you. That worked, as soon as I returned to the computer, the named player of the HP TouchPad appeared. He said that the car had a size of about 11.5 GB with only 141 MB used. The tech thought BONE was approximately 1 GB. the manual or something told me that you do not see the size of 16 GB. The technology also cited $385. package for service of the TP if necessary... HP is trying to re-coop some of their losses on this product?

  The conclusion is that the drive has been damaged in some way and not formatted for PC it would see. The full erase lead to a re - format the TP that was the way to emphasise with the PC.

  Thanks for your help, I will proceed to load CM - 9 at the next opportunity.

• transfer files from your old computer, use old hard drive?

  I just buy new desktop HP Pavilion p6-2120.  I need to transfer files, programs, etc from my 6 year old Dell desktop computer.  I know that I can use the program of transfer of Windows 7 with USB key, easy transfer cable, or external hard drive to move the files.

  As can another method of transfer, I take the old hard drive from the Dell desktop computer & install in the new HP Pavilion?  Is the old hard drive (ATX 80 GB, 7200 RPM, DIM2, XPS2) compatible with the new HP where it will work again?

  Since I am not transfer that much is the best for any purchase a Windows 7 transfer cable?

  mikesimms,

  Your theory is correct. If you want that all settings, email, documents, photos, music, and other data files, use either the program Windows Easy Transfer. It will accept an external device or use the easy transfer cable.

  If you want only the documents, photos, music, and other data files , then you could add the XP disk to the system (temporarily use the p6-2120 DVD player wiring). You can copy files to the new folders.

• How to transfer files from one account to another

  How to transfer files as music from one account to another? my old account has a virus and it got currupted and I want to know how to put my old files in my new account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  "Fix a corrupted user profile.

  Try this method.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click Show files and folders, protected the clear theHide operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

  If the steps above don't fix the problem, you should contact your provider of customer support for assistance. To find more information about customer support options that apply to this computer, click the button start , click Help and Support, and then click the ask someone or expand your search link at the bottom of the Help window.

  See you soon.

  Mick Murphy - Microsoft partner

• Is it possible to access the files shared in the Simulator?

  My Playbook application creates a few files in the shared files folder. When running my app in the Simulator, is it possible to (read) access these files from Windows?

  Thank you

  First, configure the PlayBook Simulator as a target.

  1. Click on the file-> New-> other...
  2. Expand the BlackBerry Tablet OS.
  3. Select BlackBerry Tablet OS target, and then click Next.
  4. Enter the IP address of the Simulator (or use automatic detection).  Leave the password blank and complete the wizard.

  Once you have the PlayBook Simulator configured as target, use the following steps to access the folders.

  1. Click on the window menu.
  2. Choose the command display see her-> from others.
  3. Expand QNX.
  4. Select target file system browser , and then click OK.
  5. In the target file system browser navigated to the folder that contains the file that you want to copy.
  6. Right-click on the file you want to copy, and choose copy to.  You can also drag and drop files to and from this window.

• bought a new Imac 21 and want to know how to put in place and transfer files from old imac

  I just bought an imac 21 "new operating system El Capitan. I would like to plug in and start but would like to migrate some files from my old imac under Snow Leopard 10.6.8. I'm new to this procedure and would like to help to do this. I watched a few videos, but not sure what to do on the withdrawal of some things from the old imac before you start. Delete files from the finder, I'm not sure about the emails, contacts and all that sort of thing. Could someone suggest a good tutorial to help me.

  Thank you

  Get an external drive, you can connect to your old computer via the USB port. Clone the old disk on the external drive:

  Clone using disk utility Restore Option

  1. open utility disk from the Applications\utilitaires folder.

  2. Select the destination volume in the list on the left.

  3. click on the tab restore in the main window of THE.

  4. Select the destination volume in the left list and then drag

  him the Destination entry field.

  5. Select the volume of the source of the list on the left and drag it to

  the Source field.

  6. check understood you, and then click Restore.

  Destination means that the external backup drive. Source means that the boot disk internal.

  You now have a backup of the old computer. Move the external drive to a USB port on the computer where you are restoring files at your leisure, manually. If you want to migrate your account to full user (folder), etc., then you can use the Migration Wizard to migrate the data from the external hard drive.

  How to use the Migration Assistant to transfer files from another Mac

  Migrating data from an other Mac OS X Manually

  How to use the Migration Assistant to transfer files from another Mac

  
  

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• How to transfer files and settings from one computer to another?

  Original title: transfer user

  How can I transfer (acct users) all programs and files frm lptp one to anther?

  Hi shannonprovence,
   
  -What version of the operating system is installed on the other computer/laptop?
   
  Here are some articles that will help you transfer files and settings:
   
  Step-by-step guide to migrating files and settings
   
  How to use the "files and Settings Transfer Wizard" in Windows XP
   
  If the migration from Windows XP to Windows 7, see:
   
  Migrate user files and settings from Windows XP to Windows 7