transfer network for printing USB, mac to HP2300

Similar Questions

• Speed of transfer network for dataguard

  Hi all

  Database 11.2.0.4

  RHEL6

  I'll put up dataguard PROD at the DR site.

  What is the network speed required between servers in site/two for dataguard?

  Is enough 1 MB/s?

  Thank you very much

  JC

  You may consider setting up to use a time based on check-in.  In order to keep the size of 1 G, but the archive size is just what data is there when the archive is created.  It's much smaller than I'm used to it, so apologies for that.  See the init parameter archive_lag_target.  There are, of course, to many ways to set up DG.

  ALS is a document that defines (among other things) the speed at which you can recover.  15 or 20 minutes is often suggested for when companies are unable to arrive at a precise definition.   So every 15 minutes, the db spits out a newspaper, DG move more and the applied.  Some deliberately put places in a lag time too much, then you can "pull the plug" If you know someone has screwed up bigtime, without having to make a recovery.  You also must define exactly how you will apply newspapers (there are a number of options, make sure that you understand the concepts) and expectations for the digital switchover and how to deal with the app and substitution.

• Connection PC Win7 for iMac USB printer

  Until yesterday, I had a printer is connected (USB connection) to a Time Capsule, and our laptop Windows 7 given the printer and would print it. But due to persistent problems with airport part not always wanted to connect with our satellite internet, I went to a separate router and the stop of the part of the airport. The Mac has been able to print to the printer, but the Win7 PC could not. Then I moved the printer (USB connection) to the iMac, but I still can't the Win7 PC to see the printer. I tried several methods but were unsuccessful.

  Anyone has a suggestion or a position that could help? I found a ticket to Microsoft I've tried, but it does not match what the current software. I use OS X 10.11.6.

  I'm planning on dumping, in the future the Win7 system and buy a new Mac, but until now, I need help.

  Fred

  Trying to install Print Services for Windows Hello on the Win7 PC. This app will allow you to see the shared printer on the iMac and allow you to print on it.

• My mac says "Looking for printer.

  I bought D110a yesterday, and after a few soft not to install this printer on my Mac (OS X 10.6.4), I finally got to print... However, not always. By 'not always' I mean a point print at a time, through "reboot" the printer between the prints. If I do not "restart" the printer, the print queue displays "Looking for printer...» ». It will remain in this State indefinitely. When I try to use the HP utility, I get the following message: "HP ink jet is currently unavailable. Please check if it is connected and turned on, or try again later. »

  The printer is powered on and connected. I can access the built-in Web server (which displays the status "Ready"), and the "Print and Fax" menu shows the printer as "Idle" with the green light.

  Some useful facts (?):

  I installed this printer using the HP software provided.

  This printer is used on my wireless network (Linksys WRT610n router)

  I have another printer wireless that works without problem.

  Someone at - it no indication on this topic?

  Uninstall the HP software by using its own uinstaller (in Applications > Hewlett-Packard).

  Restart your Mac.

  Download and install this: http://support.apple.com/kb/DL907

  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• Importers and visualization of the files on a memory of a connected printer USB/network Windows 8

  Hello activity. With the release of Windows 8, HP has downloaded two great videos on youtube which shows how to import and display pictures and files from memory inserted into a printer card.

  Here are two videos:

  • The first concerns import and display files on a connected USB printer port memory card in Windows 8.
  • The other covers the same thing but with instructions designed for the connected network printers.

  This video shows you how to import and display the files and images in Windows 8 on your computer, when you insert a memory card into your USB connected printer.

  This video shows you how to import and view the images on your computer using Windows 8, and files when you insert a memory card into your network connected printer.

  I hope the videos to help those wishing to import or view their files on a memory card in the printer. If anyone has problems or questions concerning the videos make a post below and I'll be happy to help you. Do not forget to include the printer model, how it is connected, the nature of the problem, the type of memory card and keep in mind that the videos above are designed to help people with Windows 8. So if you have another operating system of Windows the steps in the video do not work.

• Photosmart C410A printer, USB + connect network

  Is it possible to have a C410A printer connected via USB cable to a PC and stay on a network for the other PC at home?

  My laptop is on a virtual private network and needs to be connected USB, while other PCs in the House is on a wireless or wired network.

  Can I use both at the same time?

  Well Yes, it should work fine.

• connection for printing from a computer wireless with a connection cable to the router usb printer?

  Produst name: HP Officejet Pro L7555.

  Works with Windows 7.

  A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

  Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

  1. disconnect the Ethernet cable.

  2. on the printer: Setup > network > default settings.

  3 reconnect the Ethernet.

  Now, remove the printer in Control Panel > devices & printers, then add it again like this:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I have windows 7 (PC) and do work for the school. I need to transfer my work to a MAC computer, how can I do this?

  I have windows7 (PC) am doing a job for a school project. I need to be able to transfer my work to a MAC at school. How can I make sure that it will work on MAC?

  If these are Photoshop files, simply place them on a FAT or FAT32 to format USB key. The Mac and the PC can recognize the drive.

  Make sure that your files have l'extension.jpg/.png/.psd and so on.

  Photoshop Mac or PC can open files.

  Gene

• How flip you a photo for printing on transfer papar

  I want to print a photo from my photo gallery on transfer paper to be applied to a piece of cloth.  I don't see where I do reverse - just say I want to print on transfer paper.

  You tried to paste how flip you a photo for printing on transfer paper in yahoo search? I just do.

  It's the first thing you need to do if you have a question about an individual.

  http://us.yhs4.search.Yahoo.com/yhs/search?p=how+do+you+reverse+a+photo+for+printing+on+transfer+paper&FR=AltaVista&FR2=SFP&iscqry=>>

  UTC/GMT is 02:35 Friday, June 22, 2012

• How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

  I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

  Hello

  
  You did changes to the computer before the show?

  Method 1:
  Try the steps in the link and check.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  Method 2:
  You can update the drivers on the manufacturer's Web site and check.
  See the link to update the driver:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658
  Manufacturer link:
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Method 3:
  Try the steps from the link and check if you are able to print.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Mac displays officejet 6500 printer E710n-z but is always looking for printer

  I have a macbook pro and running mountain lion version 10.8.2

  I was not able to print for about a month and it makes me crazy!

  I deleted my printer and added it but when I send stuff to print still says looking for printer?

  I can't open the utilities tab or see the power supply or the other levels.

  I've updated the HP software from the mac store

  Please can someone help!

  Greetings!

  First and foremost, make sure that you are on the last update via Apple software update.

  After doing this, delete the printer by following the steps listed here

  After completing the steps above, restart your Mac.

  You should then be able to install the printer through the button «+»

• Slow transfer speed for USB 3.0 ports

  I have a USB 3.0 Seagate external hard drive connected directly to one of the USB ports 3.0 at the back of the computer with the cable that came with the drive. Whenever I turn it on, I get the message "this device can perform faster - this USB mass storage device can transfer information faster if you connect it to a USB 3.0 Super speed.

  I tested the speed of the hard drive and transferred on a file of 1.16 GB in 58 seconds of my drive "C".

  I also transferred the same file in the same place, for comparison, on a hard drive 10 years from an old computer which is now in a closed Chamber. This hard drive is also plugged into a USB 3.0 at the back of the computer with a USB 2.0 cable and the files had 57 seconds to cross.

  So that would mean that the Seagate drive does not work at the speed of USB 3.0.

  Can you please advise me as to how I can get the right speed for my USB 3.0 ports?

  DesF,

  You can check for a driver to chipset update for your system.

  Please keep in mind that it is a rotating disc and data transfer speeds do not match the theoretical bus speed. Certainly not the often claimed "ten times faster than USB 2.0! In addition, there a 5900 RPM disk, so a little slower there also.

  A tweak, you can try is to make sure that drive policy properties tab is set for best performance.

• The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  Hi Jack,

  Thanks for the reply.
   
  See Web Gateway site to update the chipset and BIOS drivers.
   
  Gateway support link.

  http://support.gateway.com/product/default.aspx?modelId=2375

   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.