Transfer the file RAW with edited Information?

I have Lightroom on my pc laptop and desktop (Windows Vista and Windows 7 64 bit respectively).  I copied a few Canon RAW CR2 files to my laptop in the field and edited some of the files.  Is it possible to transfer these changes, along with the files on my desktop pc?

Probably do you a temporary LR catalog on the LT to make your changes, but your permanent catalog is on the DT?

On your LT, if you use the library / metadata / save metadata to the files (plural) with selected images in the library grid, you should get an XMP file for each file CR2 containing the snapshot of adjustments when you perform the backup.  Copy the CR2 as well as the XMP file on your desktop, and when you import the changes will be part of the State of the initial import.  If you have already imported the files on your w/o the XMPs DT, then remove them from the library of DT (but not record) and reimport them after copying the XMP files above.

If it is something unique, then the single transfer and CR2/XMP is ok.

Depending on what else is in the your LT LR catalog, you can export a catalog, with just your images and their settings and import this catalog on your DT, change the paths to the images if necessary on the side of DT.

Presumably, you know how to copy files (CR2s, XMPs, LRCATs) from your laptop to your desktop through a network or a USB drive connected, right?

Either of these processes is a little messy.  If you do this on an ongoing basis then think about how to make the process as simple as possible.  What I do is have the LR catalog and images (for the last year, at least) on an external drive 1 TB USB3-speed that I bought at Best Buy, where drive letter is set to be the same on both computers I use LR on, and then I just plug in the USB drive to any computer I want to use at the moment.  I backup all the contents of the drive every night at a different speed USB3 drive so if I never forget that I'm wearing autour and destroy it, then I have another copy of everything.

The initial copy took time, but changes in nightly replication does not take too long.  I use PTReplicator from KarenWare to plan a my pictures folder replication nightly at 02:00.  There are other similar programs to facilitate unidirectional replication such as RoboCopy SyncToy and DoubleTake.

Tags: Photoshop Lightroom

Similar Questions

  • Nikon D800 taken with Sandisk extreme raw files more 32 GB SDHC card was corrupted. Able to preview in the library of Lightroom4.4, but not able to import or transfer the files from the card to the computer. Any ideas on how to save the library in Lig win

    Hi, I shot a few photos December 31 night mode RAW Nikon D800 and extreme as well as Sandisk card SDHC 32 GB. Looks like the card got some errors of memory so not able to transfer the files from the card to the computer. However, I am able to view the photos through Lightroom ver 4.4 library, but when I tried to import them, it gives me an error message indicating this file cannot be read.

    Is it possible to save the photos to the "library window" in lightroom overcoming the card read errors?

    Thanks in advance

    If you see the photos in the library module, the photos are already imported. If I there are thumbnails in the import dialog box, that means the jpg display embedded in the Raws are ok, although the raw data itself is corrupted.

    You may be able to save the jpgs shipped with this: Instant RAW JPEG

  • As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

    As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

    I found a few other questions on this forum who have remained unanswered.   I found a site citing the problem for drive X - I use XI.

    Change to drive XI.   Perhaps the reader at the library had this as its default setting.

    1. In Adobe Reader, clear the check box enable the Mode protected at startup :

      • If you have a PDF open, right-click the document, and then click Page Display Preferences.
      • If you open Adobe Reader from the shortcut, click on Edit > Preferences.
    2. In the categories dialog box Preferences pane, click (enhanced) protection, and then clear the box enable the Mode protected at startup .
    3. Close and reopen Reader.

    I have no idea if that setting has been changed in my XI player since I used this version exactly one year ago.

  • I can't transfer files flv to mobile to the computer, when I tried to transfer the file, a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

    I can't transfer files flv to mobile star Samsung Galaxy of the computer, when I tried to transfer the file, showing a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

    Discussions were merged.

    Deleted duplicate.

    Hello Arun,

    Thanks for posting back.

    If you have successfully transferred your files and they are stored in a location on the hard disk, that is, in a folder or drive on your computer, they will remain on your computer, regardless of any number of reboots.

    Hope this information is useful. If the problem persists, please post back for assistance.

  • Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

    Hi all

    This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

    6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

    However, I have not been successful transfer the file to the controller for the upgrade.

    I have tried everything I know:

    * transfer the file of different programs including tftp32d and solarwinds TFTP server

    * transfer the file of different applications such as FileZilla and FTPD FTP server

    * transfer the WCS web interface file

    * running a direct connection to the WLC with a static IP address on the interface

    * verified that there are no interfering firewalls with transfer

    * adjusted times waiting and pads as a result

    I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

    The transfer reachers about 97MB before it fails.

    Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

    I feel I forgot something...

    # #debug transfer all out #.

    * Did not write body

    * Only partial file received: 97086398 bytes

    * 23:55:26.248 Mar 06: ftp operation returns 23

    * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

    MSG = unknown error - refer to log

    * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

    O log)

    * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

    error - refer to log

    * 06 Mar 23:55:26.470: RESULT_CODE:12

    * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

    on

    * 23:55:26.577 Mar 06: finished remove

    % Error: Code of file transfer failed - unknown error - refer to log

    #############################################################

    Here's my output sysinfo sh.

    release of sysinfo #show # #.

    Name of the manufacturer... Cisco Systems Inc..

    Product name... Cisco controller

    Version of the product... 6.0.196.0

    Bootloader Version... 1.0.1

    Retrieving Image Version field... 6.0.182.0

    Firmware version... Console USB 1.3, 1.6 Env FPGA,

    1.27

    Build Type....................................... DATA + WPS

    Name of the system... WCS_01

    Location of the system... G5

    Contact System...

    ObjectID of system... 1.3.6.1.4.1.9.1.1069

    IP Address....................................... 10.1.0.17

    Last Reset....................................... Software reset

    Time system... 0 days 0 h 53 min 10 dry

    Location of the time zone of the system...

    Base boot license current level...

    Current license type Boot... Permanent

    Next time you start level license... base

    Next Type of license to Boot... Permanent

    ###############################################################

    Any suggestions? Am I missing something?

    Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

    http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

    So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

    Thank you

    Scott

    Help others using the system of rating and marking answers questions like "answered."

  • Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

    Hello

    I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

    The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

    I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

    Thanks in advance

    Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

    Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

    Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

    Good luck

    Hunt

  • What is the file brayhs with size zero?

    Original title: brayhs

    What is the file brayhs with size zero?
    How can I clean my system (windows Server 2003) this?

    Run a full scan of the system and set your PC to show hidden and system files and the folder and check if there is any suspicious element or just try to delete.

  • I lost all the file associaation, with the exception of aol, how do I add these files?

    I lost all the file associaation, with the exception of aol, how do I add these files?

    Hello

    1. what happens when you try to open a program?
    2. have you made changes on the computer recently?

    Try the steps listed in the article below and check.
    How to change or choose the program that starts when you double-click a file in Windows XP
    http://support.Microsoft.com/kb/307859

    I hope this helps.

  • DVD how much we need for the files backup with backup and restore program?

    Hello how are you?
    DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

    I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

    (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

    (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

    If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

    All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

    Good luck.

  • name the file exported with date

    Hi, I use this command to export my schema

    exp file = c:\expdat.dmp med/med

    I think that if I use the same command over and over again, it will replace the old file with the new one? right?

    2. I want to name the file exported with the sysdate (date and time)? , and I think it's a way to create a new file and does not replace the old file.

    Thank you

    Here is an example of adding a date for a file name:

    > exp med/med file=c:\expdat.%date:~10,4%%date:~7,2%%date:~4,2%.dmp

    To add as a data and once, you just need something based on time that is unique, so try something like:

    > exp med/med file=c:\expdat.%date:~10,4%%date:~7,2%%date:~4,2%.%time:~1,1%%time:~3,2%%time:~6,2%%time:~9,2%.dmp

  • Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

    Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

    Hello

    2796614 wrote:

    Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

    Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

    You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

    Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

    If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

    Explain, using specific examples, how you get these results from these data.

    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: Re: 2. How can I ask a question on the forums?

  • I have a new macbook pro and I didn't know that it is not a dvd player. Can I install my new photoshop elements 13 on my old laptop and then transfer the files to my new?

    I have a new macbook pro and I didn't know that it is not a dvd player. Can I install my new photoshop elements 13 on my old laptop and then transfer the files to my new? If this isn't the case, I can download the installer from somewhere?

    Hi Matt,

    Try products download Photoshop Elements | 10, 11, 12, 13

    Kind regards

    Sheena

  • When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

    When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.

    PlsConnect.JPG

    Hi Colin,

    Please try to reinstall the creative cloud after disabling antivirus and firewall.

    Reference: error download or update Adobe Creative Cloud applications

    Concerning

    Megha Rawat

  • I have an Apple Macbook Pro. My photos are in the iPhoto files. How to transfer the file I want to work on Photoshop?

    I have an Apple Macbook Pro. My photos are in the iPhoto files. How to transfer the file I want to work on Photoshop?

    Where the iPhoto photos are located and how to access the photo library, iPhoto and image files

  • My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

    My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

    Run the Creative Suite cleanup tool, reinstall. However, according to the tables below, your G12 files should not be readable in CS4 at all.

    Camera Raw plugin | Supported devices

    Applications of camera Raw compatible Adobe

    Mylenium

Maybe you are looking for