transform a 3D in a 2D table array

Similar Questions

• Create a table array

  Hello

  How can I create a table array please?

  Kind regards

  Peter

  Table of table hack

  Table shredded feature request

• To convert a double complex 2D table array 2D of real double 64-bit

  Hello

  I have a table 2D double complex numbers that I have to establish a curve of intensity. Now I create the node property to scale Z scale with the maximum and the minum range. See the attached VI. There is a conflict between the type... How is possibel to convert?

  Thank you

  smercurio_fc wrote:
  If you just want to draw the scale then direct the value of your complex in the complex of the polar function.

  Because of scale (and not the phase) use the function absolute value from table 2D complex. It is a little faster because it is simpler and gives the same result.

  

• Add constant neumber way out of the table array and form

  I have two user input constant, e.g. 0.25 and 0.5

  I want to

  Add 0.25 (which will also be the first element of my table) 0.5 = 0.75

  then,

  I want to add 0.5 to the second element of my table, that is to say, 0.75 and write it as my third element = 1.25

  then add 0.5 to my third point, that is, 1.25 and write it as my fourth element and so on

  generating a table of a fixed number of items virtually 720 items that looks like this

  0.25

  0.75

  1.25

  1.75

  2.25

  .

  .

  .

  .

  .

  to the 720th element...

  Help, please

  Thank you...

  Avinash

  You could do something like this:

  

• Construction of a 2D on a 2D table array

  Hello

  I have a problem in the construction of table 2D. Currently, I have a 2 x 3 2D chart. I would build a table to 2 x 6.

  Example [1 2 3 and [7 8 9 [1 2 3 7 8 9

  [[4 5 6] 1 2 3] 4 5 6 1 2 3]

  I tried to use inserts the table but its actually not seems to work because I place the index finger at the col 3, during the insertion of the second table 2D. I wonder I have a reached for a table of 2 x 6. I appreciated if someone could help me? Thank you very much.

  Here's a solution, I came with.

  I don't know if it's the best/worst way to go, but it does the trick

  

• transformation of the two different database table

  Hi all
  I am trying to load the table from a database table to another table of database in ODI 10 g. I created two physical and logical topology.
  But when in the design of the interface I drag source and target tables in the diagram window, but here he doesnot shows the auto mapping options, when I try manually by dragging a field, I failed. When I run the operation the following error has occurred:
  Create or replace view db1. "" C$ _0 W_INT_ORG_D.
  (
  
  )
  in select
  
  from db1. W_INT_ORG_DS W_INT_ORG_DS
  where (1 = 1)
  
  
  Here db of the source and the target are the same...
  How can I solve it

  Click the field to the target. And then in the expression editor to write

  sourcetable_alisname. FieldName

  As do this for all columns, then save and close the interface.
  Now open your interface, and then click on any target filed. You should see the filed source raised is automatically informed.

  If everything is ok then its done.

  Thank you

• Tips for the custom transformation script change the Associations of FK table

  Hello
  
  I try to write a transformation script that will scroll through tables in a large model and change some
  FK associations to change the remote table at CF. By the way, the reason is that our logic model
  the logical entities that represent many areas of codes of small research. However, our relational and physical model has a
  utility single physical filing table of codes that contains all areas of these codes. Therefore, a part of the transformation
  our logic model for the relational model is to swing all FK associations for these areas of research codes
  in the table of common code. Then the paintings representing the research areas can be removed from hard.
  
  In any case, I'm looking at the
  
  oracle.dbtools.crest.model.design.relational.FKIndexAssociation
  
  or the
  
  oracle.dbtools.crest.model.design.relational.Index
  
  to see if one of them can be manipulated to perform the transformation I want to accomplish.
  
  When I perform the equivalent process manually via the property sheets there are several ways to address this problem.
  
  (a) the method more jolise seems to change the FK in place by clicking on the FK in the relational schema and changing
  the property called ' PK / UK Index'. Change that to the pharmacokinetics of utility code repository table that replaces the original
  table (which represents the research field). A side effect of this translates into CF mapping
  columns being nulled out. They must be remapped to original columns (which are kept).
  So in two stages, the existing FK is detached from the original, attached table to the new table, and then
  FK columns are reused in place for new CF mapping.
  
  (b) the brute force method is to remove the original FK and then create a completely new FK to the new table. There are
  several dialog boxes that allow you to keep the original FK columns and use them in the new FK.
  
  I realize, this is a somewhat complex transformation, but I would like a few algorithmic advice on which path to take
  to try to achieve. In particular, there is a script that is equivalent to that of the first process above?
  
  I don't even know if the CF which is represented on the relational schema is represented by the FKIndexAssociation or Index
  class in the script object model. In other words, I have to loop through the tables in the relational model what would be my
  starting point:
  
  FKS = table.getFKAssociationsList ();
  
  or
  
  fkIndexes = table.getAllInds_FKeyInds ();
  
  or something else. The names of the properties in the user interface are always with the properties of scripts not so
  It's a little difficult to understand such things.
  
  Once I have access to the object that is equivalent to the FK in the property/diagram worksheet, which
  is the best way to handle via script. How can I change the end of parent and away from CF to point to the new table.
  Or if I have to delete the original CF and then re-create - is there a way to save the original FK columns and reuse them
  While creating the new FK?
  
  ********************
  
  Another question. What is the best way to remove tables from a relational model. I note that there is a remove() undocumented (?)
  a method that is available on the Table. It's probably a superclass to remove other things as well.
  
  When I try to use this method in a loop the script throws up to dialog boxes that are similar to dialog boxes that are displayed during the execution of a removal
  manually through the user interface. Is it possible to intercept and answer dialogs programmatically?
  So for example if I get a window of dialogue as
  
  You want to remove generated columns of FK 'FOO' in the table 'BAR '?
  
  is it possible to intercept this dialog in the script and then answer Yes or no it via the script?
  
  ***************
  
  If it is too difficult to perform this type of transformation with the help of script
  is to do the transformation on the generated DDL file. But it would be cleaner to
  to do the transformation in the relational model DM if possible.
  
  All advice appreciated.
  
  Rgds, BP

  When I try to use this method in a loop the script throws up to dialog boxes that are similar to dialog boxes that are displayed during the execution of a removal
  manually through the user interface. Is it possible to intercept and answer dialogs programmatically?
  So for example if I get a window of dialogue as

  You want to remove generated columns of FK 'FOO' in the table 'BAR '?

  is it possible to intercept this dialog in the script and then answer Yes or no it via the script?

  It's in the preferences - "Data Modeler > model > relational > remove FK column strategy."

  I don't even know if the CF which is represented on the relational schema is represented by the FKIndexAssociation or Index

  Is a pair of two - FKIndexAssociation, that's what you see the pattern, but it is hidden in the table index - isFK() returns true for this type of index and you can take FK with getFKAssociation()

  Once access to the object that is equivalent to the CF in the property/diagram worksheet

  table.getFKAssociations () - returns an array of the foreign keys;
  You can get to them from the relational model:
  model.getFKIndexAssociationSet () .toArray () - FK all model

  How can I change the end of parent and away from CF to point to the new table.
  Or if I have to delete the original CF and then re-create - is there a way to save the original FK columns and reuse them
  While creating the new FK?

  There should be no problem if you use the same number of columns with the same data type and order:

  get the current FK columns
  columns = fk.getColumns ();
  newRefKey is the new key question; referred and child columns must match the data type and the order in the keys - you do not ask how to get
  fk.changeKeyObject (newRefKey, columns);

  function setting in preferences, you will get the question on the columns of FK.

  Therefore, a part of the transformation
  our logic model for the relational model is to swing all FK associations for these areas of research codes
  in the table of common code. Then the paintings representing the research areas can be removed from hard.

  You can create the hierarchy of entities with the root attribute (and PK identifier) KP holding entity and entity - your look-up - empty child relationships will be these entities of the child. With the help of the transformation of the "unique Table" you will get what you are trying to achieve now with script.

  Philippe

• How to insert several tables 1 d in a 2d tables?

  I posted something similar to this, and I thought that my problem was resolved, but I'm in trouble again.

  My problem is this video.

  http://www.YouTube.com/watch?v=wSAw9m-z6dM&context=C30f82aeADOEgsToPDskL8SKJlGaKcY0TQ1Z3KJuUL

  Thank you in advance.

  I couldn't watch the video...

  Do you mean insert 1 d tables in an existing 2D table?

  Are the tables 1 d of the same type?

  The simplest method would be to use the dashboard generation and right-click and select CONCATENATE entries.

  It will put the new 1 d at the bottom of the existing table arrays.

  If you create a new 2D, as above, but do not concatenate entries.

• Creating tables in a nested for loop

  Hi all.

  I was stuck in this problem for quite a while now and I still don't know how to continue. Some outside the entrance would be greatly appreciated!

  I'm doing the following:

  -Take an array of numbers, to check if they are within a certain range (e.g. between 2 and 4)

  -Build two new arrays: one with all the numbers that are inside the beach and the other with the rest.

  An additional condition is that the amount and value of the range conditions will change (for example, it could be between 2 and 4 only / 2, 4 AND 6 and 7 according to the entry)

  To treat this, I created two nested for loops - one that goes on a table that contains conditions of the beach and inside that actually go and check if the values are in the range. I think I did that part successfully, but the next part is confusing to me - how to actually create the tables separated within two loops for?

  My apologies if I did not explain it well. Another method to support this problem is I want to translate following LabVIEW:

  Ranges of table / / [1 5 7 10] exodus-> This means we want to divide numbers based on those who are in (1,2) and (4.5) against those who are not

  Table of values / / [2 3 6 11 3]

  EndOperationDelegate table / / array of values within the range
  Table outValues / / Array of values out of range

  for m = 1:size (ranges)

  for n = 1:size (values)
  If (THE NUMBER IS on the INSIDE of EACH RANGE)
  EndOperationDelegate = [EndOperationDelegate NEWNUMBER]
  on the other
  outValues = [outValues NEWNUMBER]
  end

  end
  end

  Sounds easy enough, but it gets so chaotic with Labview that I don't know what to do. I have attached a reference image - insertion in the array function is not in fact add to the table, it creates a new table. How can I save that for when the nested for the ends of the loop?

  I have seen a few examples with shift registers which lie in a loop and I couldn't successfully that transfers in my block diagram.

  Any help/direction would be greatly appreciated.

  Hello!

  See the following example to understand how you can create a table in the loop For

  

  In your case, you also can uce conditional terminal to create a table only when then located nearby. It makes the code much cleaner that the structures of the case

  Hope this helps, if not, let me know if I can help you!

  Marcin

• Transmission of data in a table with loop and case

  Hi all, I'm Felix and new to labview.

  I am currently on a certain data editing project. I have some data (Spectra taken in different times) in a .lvm file which needs a Gaussian fit and I would like to have the characteristics of adjustment to a 2D array, so I can trace the amplitude, time vs Center and width.

  My problem is that my final picture is a 2d one and made it gives me 1 d.

  Can you please help me to solve this problem.

  Thank you

  Felix

  Hi felixd,

  According to my understanding, your problem is in the construction of the matrix. Instead of spending items in the funcion with a 2D table array construction, you can initially built a 1 d array elements and then include her in a 2D array using another feature of table construction. Check the attached vi.

  Concerning

  Amine31

  (Give congratulations to good answers and Mark as a Solution If your problem is resolved)

• Restrict the insert, update, delete the other user table

  I created a new database user. I have granted the privileges system into a TOAD.

  • Select any table
  • alter any table
  • delete a table

  I found that account can select, alter, drop table arrays of other schema. So how I can limit the which account to modify, remove only its tables belonging and select table of all the schema?

  Is there the ALTER table, ALTER view, ALTER procedure, ALTER synonym, DROP table, DROP view, DROP procedure, DROP synonym system privileges? How can I grant it without ANY system privileges?

• transformation script changes not saved in design

  Hello

  I made several scripts processing to change my relational model to the Data Modeler.

  One of the scripts defined abbreviations of table for all the table based on the PK constraint. (I'm importing the model of my data dictionary which has PK constraints defined as {abbr} _PK)

  After I "Apply of Scripts of Transformation Custom", I see that all tables have now an abbreviation of the table.

  However, if I save my design, close and reopen it, all abbreviations are empty again.

  I did a few tests and manually fill the field of abbreviation Table changes be saved.

  If I check the table XML files, I can clearly see that the table for which I manually added the acronym has a < short > tag, which is not what I filled auto with the transfer script.

  I noticed a similar behavior for scripts that I use to fill the parameters of Auto_inrement and others. After I run the script, I can see all the values filled in my template, but is not be saved and I lose all the changes made after closing my model.

  I noticed that the changes be saved if I choose Save as and save my template in a new directory (however to register as in the same directory create a SVN error).

  Is there something I should add to my .js script that changes be saved?

  Is this a bug?

  Does anyone else have these issues?

  I use Data Modeler 4.1 early adapter on a win machine 7.

  An example of .js script I use:

  //******************************************************************************

  //

  NAME: set_table_abbreviation

  AUTHOR: NVDA - NIAUW

  OBJECTIVE: use this script to define abbreviations of table in the physical model for each table

  VERSION: 1.0

  //

  PREREQUISITES:

  -Table with PK constraint and name constraints = {table abbr} _PK - as it is in the designer

  //

  //******************************************************************************

  load compatibility to 4.1 data maker script (ea)

  Load("Nashorn:mozilla_compat.js");

  import Java packages

  importPackage (javax.swing);

  //----------------------------------------------------------

  Global declarations

  //----------------------------------------------------------

  var msg ="";

  //----------------------------------------------------------

  Main body

  //----------------------------------------------------------

  find all tables in datamodel in table

  tables = model.getTableSet () .toArray ();

  loop over the tables and do something with it

  for (var t = 0; t < tables.length; t ++) {}

  If (! table [t] .getAbbreviation ()) {}

  var abbr = setAbbrv ([t] tables);

  If (abbr! == ") {}

  tables [t] .setAbbreviation (abbr);

  tables [t] .setCommentInRDBMS ("abbreviation table: ' + abbr");

  MSG += "table" table [t] .getName () + 'got abbr' abbr + "\n";

  }

  }

  }

  inform about what happened

  If (msg! == ") {}

  JOptionPane.showMessageDialog (null, msg);

  } else {}

  JOptionPane.showMessageDialog (null, ' no table (without abbr) found.) ») ;

  }

  //----------------------------------------------------------

  Functions

  //----------------------------------------------------------

  FUNCTION: setTbleAbbrv

  //----------------------------------------------------------

  function setAbbrv (table) {}

  var = abbr "

  var s = table.getPKeys () .toArray ();

  for (var t = 0; t < constr.length; t ++) {}

  cast to string

  var strConstr = constr. [t] + '.';

  If (strConstr.match(/_PK./)) {}

  abbr = strConstr.replace var ('_PK' ");

  }

  }

  If (abbr = ") {}

  MSG += "table" + table.getName () + "is not a PK constraint. \n » ;

  }

  back to abbr;

  }

  FUNCTION: read

  //----------------------------------------------------------

  function read (pMessage) {}

  var input = JOptionPane.showInputDialog (pMessage);

  return entry;

  }

  Hello

  in the loop where you treat the tables, do the following:

  tables [t] .setDirty (true);

  This will mark the object as being edited and saved during the registration of the design.

  Joop

• Nested PL/sql tables passing of ADF

  Hi all

  I'm moving a nested pl/sql table parameter of adf for the stored procedure.

  I have the following code to bind the variable in my AMImpl

  ArrayDescriptor desc = ArrayDescriptor.createDescriptor ("STATION_FEATURES_T", st.getConnection ());

  TABLE array = new ARRAY (desc, st.getConnection (), stationFeatures);

  For the first time, the code runs successfully. However, on the call to the AMImpl method even once, the ArrayDescriptor.createDescriptor get the following error:

  java.lang.ClassCastException: oracle.jdbc.proxy.oracle$ $1jdbc $1replay $1driver $1NonTxnReplayableBase $2oracle $1jdbc $1OracleTypeMetaData Array$ $$Proxy cannot be cast to oracle.sql.ArrayDescriptor

  I checked that the connection object is done correctly both times.

  I also tried to set the setting force = true in ArrayDescriptor.createDescriptor to replace any descriptor be cached.

  Pointers would be much appreciated.

  You must mention jdev version because there are changes in the ojdbc7 driver (jdev 12 c +).

  For example, this (old) approach with ArrayDescriptor.createDescriptor () is deprecated in favour of factory of conn.createOracleArray () or conn.createARRAY () methods.

  Also, how do you get 'st' object?

  Dario

• How to treat only selected tables?

  I am writing a transformation I only applied to certain tables in the model.  I found the "isSelected()' on the table object function, but appears not to do what I thought, he does.  If I selected a table in the user interface and apply my transformation, the table not treated.  Passage through the debugger shows that the isSelected() function returns false for all my paintings.

  Here is the code I use to test...

  tables = model.getTableSet () .toArray ();

  for (t = 0; t < tables.length; t ++) {}
  table = table [t];

  If (table.isSelected ()) {}
  table.setName ("Found_You");
  }
  }

  Is it possible for me to treat only the tables that are currently selected in the user interface?

  Thank you

  Eric

  Hi Eric,.

  Must be something like this

  importPackage(javax.swing);
  mainView = model.getMainView();
  
  selObjects = mainView.getSelectedObjects();
  
  for (var t = 0; t		   

• [noob] Possible to add an event listener in a table?

  Hi all

  I suspect, it might not be a way to do this, but I thought I would ask.

  I was wondering if there is anyway to add an event listener to a table ("array.addeventlistener (EVENT, cheetosFunction)');.

  I'm working on writing from a table that has several pushed DisplayObjects in, and I was hoping that instead of having to associate each DisplayObject instance with a listener event separately ("head.addEventListener [...], torso.addEventListener [...] legs.addEventListener [...]" ""), since the entire table would be these DisplayObjects, I could save time by adding a unique EventListener in the table, which has a single line of code instead of several.

  Any way to do this, or do something useful in the same way?

  use:

  for (var i: int = 0; i<>

  table [i] .addEventListener (MouseEvent.CLICK, cheetosFunction);

  }