Translate the name of SIP - UA number called

Did anyone know, how to use the number called in SIP calls instead of the name of register SIP - UA.

In my case A7302337 - authentication name, 7302338 - incoming called number.

But, dial-peer unknown why use of A7302337.

See below.

Thanks in advance!

C2901. Lawer #.

May 17, 14:06:34: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:

GUEST sip:[email protected]/ * /: SIP-5060/2.0

Via: SIP/2.0/UDP 89.207.94.24:5060; branch = z9hG4bK464550; rport

P-CGP-redirector: [email protected] / * /

Record-Route:

Via: SIP/2.0/UDP 89.207.94.25; branch = z9hG4bKac2045160544

Max-Forwards: 69

From: <> [email protected]/ * / >; tag = 1 c 2045153887

To: <> [email protected]/ * /; user = phone >

Call ID: [email protected]/ * /.

Contact: <> [email protected]/ * / >

CSeq: 1 INVITE

Support: em, 100rel, timer, replaces, path, start of session, resource-priority

Enable: REGISTER, OPTIONS, GUEST, ACK, CANCEL, BYE, NOTIFY, PRACK, REFER, INFO, REGISTER, update

User-Agent: Audiocodes-Sip-gateway-Mediant 1000/v.5.20A.021.001

Content-Type: application/sdp

Content-Disposition: session

Content-Length: 569

v = 0

o = AudiocodesGW 2045145418 2045145099 IN IP4 89.207.94.25

s = phone calls

c = IN IP4 89.207.94.25

t = 0 0

m = audio 6770 RTP / AVP 0 8 18 101

c = IN IP4 89.207.94.25

a = rtpmap:8 PCMA/8000

a = rtpmap:0 PCMU/8000

a G729/8000 rtpmap:18 =

a = fmtp:18 annex b = No.

a rtpmap:101 telephone-event/8000 =

a = fmtp:101 0-15

a = sendrecv

a = ptime:20

a = rtcp:6771 IN IP4 89.207.94.25

m = image 6772 udptl t38

c = IN IP4 89.207.94.25

a = T38FaxMaxBuffer:1024

a = T38FaxMaxDatagram:122

a = T38FaxRateManagement:transferredTCF

a = T38FaxUdpEC:t38UDPRedundancy

a = T38FaxVersion:0

a = T38MaxBitRate:14400

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number = A7302337, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = A7302337, saf_enabled is 1 saf_dndb_lookup = 1, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Number = 89036223360, called number =, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result = NO_MATCH(-1) after all rules attempt Match

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Number = 89036223360, called number =, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result = NO_MATCH(-1) after all rules attempt Match

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/580225688208/DPM/dpAssociateIncomingPeerCore:

Number = 89036223360, called number = A7302337, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/580225688208/DPM/dpAssociateIncomingPeerCore:

Result = NO_MATCH(-1) after all rules attempt Match

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchSafModulePlugin:

dialstring = A7302337, saf_enabled = 0, saf_dndb_lookup = 1, dp_result =-1

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersMoreArg:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchSafModulePlugin:

dialstring = A7302337, saf_enabled = 0, saf_dndb_lookup = 1, dp_result =-1

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersMoreArg:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number = A7302337, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = A7302337, saf_enabled = 0, saf_dndb_lookup = 1, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Number = A7302337, called number =, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result = NO_MATCH(-1) after all rules attempt Match

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Number = A7302337, called number =, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result = NO_MATCH(-1) after all rules attempt Match

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = A7302337, saf_enabled = 0, saf_dndb_lookup = 1, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchSafModulePlugin:

dialstring = A7302337, saf_enabled is 1 saf_dndb_lookup = 1, dp_result =-1

May 17, 14:06:34: //-1/580225688208/DPM/dpMatchPeersMoreArg:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 101, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 101

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 40002

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 103, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 103

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 40006

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 104, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 104

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 40004

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 105, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 105

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 40003

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 106, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 106

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 40001

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = A7302337, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = A7302337

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

No outbound dial-peer does not; Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result =-1

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = NO_MATCH(-1)

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 107, Peer Info Type = DIALPEER_INFO_SPEECH

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 107

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 40005

May 17, 14:06:34: / / 206/580225688208/SIP/Msg/ccsipDisplayMsg:

Envoy:

SIP/2.0 100 trying

Via: SIP/2.0/UDP 89.207.94.24:5060;branch=z9hG4bK464550;rport,SIP/2.0/UDP 89.207.94.25; branch = z9hG4bKac2045160544

From: <> [email protected]/ * / >; tag = 1 c 2045153887

To: <> [email protected]/ * /; user = phone >

Date: Thu, 17 may 2012 14:06:34 GMT

Call ID: [email protected]/ * /.

CSeq: 1 INVITE

Allow-events: telephone-event

Server: Cisco-SIPGateway/IOS-15.2.3.T

Content-Length: 0

May 17, 14:06:34: / / 206/580225688208/SIP/Msg/ccsipDisplayMsg:

Envoy:

SIP/2.0 404 not found

Via: SIP/2.0/UDP 89.207.94.24:5060;branch=z9hG4bK464550;rport,SIP/2.0/UDP 89.207.94.25; branch = z9hG4bKac2045160544

From: <> [email protected]/ * / >; tag = 1 c 2045153887

To: <> [email protected]/ * /; user = phone >; tag = 29C6FC-1848

Date: Thu, 17 may 2012 14:06:34 GMT

Call ID: [email protected]/ * /.

CSeq: 1 INVITE

Allow-events: telephone-event

Server: Cisco-SIPGateway/IOS-15.2.3.T

Reason: Q.850; cause = 1

Content-Length: 0

May 17, 14:06:34: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:

SIP ACK:[email protected]/ * /: SIP-5060/2.0

P-CGP-redirector: [email protected] / * /

Via: SIP/2.0/UDP 89.207.94.24:5060; branch = z9hG4bK464550; rport

Max-Forwards: 69

From: <> [email protected]/ * / >; tag = 1 c 2045153887

To: <> [email protected]/ * /; user = phone >; tag = 29C6FC-1848

Call ID: [email protected]/ * /.

CSeq: 1 ACK

Content-Length: 0

Try to use a voice translation like this rule:

translation of the voice-rule 1

rule 1 /A7302337/ /7302338/

voice translation-profile XLATE_CALLED

translate 1 called

If you want to use the To header instead the SIP URI, you must use the CUBE.

See this article: http://tblog.cisco.be/2011/02/17/cube-conditional-sip-profiles/

Kind regards.

Tags: Cisco Support

Similar Questions

What is the name of effect of beam?

When I call solid. Effects.addProperty ("Beam") I get back a null object. What is the proper way to translate the name of the effect I see in AE as the name that I need to pass to the call of addProperty().

Use the Remove:

http://aeportal.blogspot.com/2011/02/AE-plug-in-Matchnames.html

Click on the link to David Torno for a fairly comprehensive list.

What is the name of the plastic part that connects to a sata HD to connect within a Bay of HD dv9000?

What is the name and or part number for the small total plastic taken hard power sata sata and port of a disk so that it can be housed in a DV9000 hd Bay? I can't find this thing anywhere. Any ideas?

http://CGI.eBay.com/SATA-HD-hard-drive-caddy-connector-HP-DV9000-dv6000-/170628745418?PT=PCC_Drives_Storage_Internal&hash=item27ba4408ca

I hope this helps.

Translate the title of the registered interactive report

Hello
APEX 4.2.5.00.08
Does anyone know a way to translate the titles registered interactive report for a multilingual application?
I mean saved reports reports of type "Default Alternative" that are defined by an administrator (so not by end users).
Not sure if there is a way from an admin account sets these reports in the runtime environment, but they are registered/vissible in the IDE, so maybe there's a way.
I can't find in the repository of the translation.
Concerning
Bottom

Hi there,

Unfortunately, there is not a way for you to translate the names of the default Alternative to the interactive reports. This is a known bug issued / filed against Application Express.

Joel

Replace the selection in the name of the group file name

Hi guys,.
I have a very good script that saved images much faster, but my colleagues are some problems ruefully at the end.

var saveFile = file (oldPath + "/" + theNewName + "-" + doc.layerSets [a] .name + '.jpg');

I use a tool to rename mass, but they find it too complicated, so I was wondering if it would be possible to change it to the following.
The name of my group is called 'MUG-IMAGE '. The name of the file is "12345", so with the above the existing script maps, it will record it as '12345-MUG-IMAGE '. Then I use a mass renaming tool and move the 12345 at the end of the file name, so it reads as "MUG-IMAGE-12345".
I have several groups who use this script in the same file, so the "12345" is always at the front, but ultimately must be rearranged to adapt to different points in the file names. So there may be 'CLOTHING-12345-WHITE' or 'CASE-BLACK-12345-SMALL.
I want to know is if there is a way to insert an asterisk (or something similar) where I want the name of the file that you want to go? Thus, the name of my group would be "MUG - IMAGE-* ' and choose the file and run the script to register the group in JPEG format, it takes the file name and replace the asterixes with the name of the file, so it would be"MUG-IMAGE-12345"- and to do it for the different groups with Asterix different investments?
I hope I made sense. I would really appreciate help on this issue.
Thanks in advance!

var fileName = theNewName.slice (0.5);

If (indexOf("***")! = - 1) {}

var saveFile = file (oldPath + "/" + "-" + doc.layerSets [a].name.replace ("*", fileName) + ".jpg");

}

else {}

(var File(oldPath+"/"+"-"+doc.layerSets[a].name+"_"+fileName = saveFile) + ".jpg");

};

Does this work for you?

ID edge include the name of the element prefixed with Stage_. Why isn't it documented?

Suppose that there is a symbol with the name 'mySymbol' with a text called 'text' element it contains. To change the value of the 'text' element, the documentation would he do in this way:

sym.getSymbol("mySymbol").$("text").html ('new world');
Using 'Stage_' rating, the text element can also be changed as well:

$("#Stage_mySymbol_text").html ("new world")
Note the underscore (_) between "'Stage_mySymbol ' and the element of text." This creates a kind of notation 'dot '. Instead, underscore 'point' is used. "Stage_mySymbol" represents the symbol "mySymbol" and "_text" the text element it contains.
For me, on the conceptual level, using "Stage_" is better and seems closer to the syntax of jquery.
Since it is not mentioned in the documentation, I'm afraid that it could become obsolete.
Any ideas why "Stage_" notation for IDs is not documented?
Is there a chance that it will become obsolete?

Thanks a lot for your answer. You are absolutely right. Apparently, you can't get an answer from Adobe support on this forum so I called 1-800-833-6687 and was able to get help free well as them. Their response has been almost exactly yours. They plan no change in this. If by chance slim there is a change, they do things backward compatible.

Thanks again,

Mark

Display number and the name of the caller

Greetings,

I have an Iphone 6 IOS 9.3.3 when I get a call, is only to show the name of the appellant, I want to view calling name and number.

I tried so hard, but I have found no Solution.

There is no option for this on the lock screen.

Go to application phone and select newer and type the phone number.

"Maybe the name calling.

recently, I updated my iPhone 6 more iOS 10. I received text messages wrong of others looking for someone else. The number isn't in my contact list and I don't know the person, but it shows "maybe (the name of the person). I read that is linked to your email address but I have no information of that person in my email, I never sent email to them or received from their. is it possible that this caller ID works for numbers that I never had contact with the front? So if I sent a text message to the wrong number, they'll see "maybe (my name)" even if their never contacted me or my information in their email?

Hi Butterfly 85,.

I understand that you have questions about how your iPhone has determined the name to display for a number that is otherwise not in your contacts. I know it's important to have control over the information on your iPhone, so I'm happy to help you.

It seems that the caller ID feature can be determined by your carrier. You can contact your operator for more details, or read this article to see how to disable:
Call transfer, call waiting and other features of call on iPhone - Apple Support

Thank you for using communities Support from Apple. See you soon!

Why my cd written to show a track instead of the name number to sing?

Why my playlists on my cd show carved a number of track instead of the name of the song?

Because your custom CD information is not stored on disk or anywhere elsewhere. iTunes uses the Gracenotes CDDB database to recognize commercial CD and the information for each song. There is a feature called CD Text, which can be used to write the metadata on the drive which will include some CD players in the car, but often, the data is ignored. iTunes cannot read this back.

TT2

BlackBerry Smartphones for incoming calls caller ID displaying DO NOT name of contacts (phone number only views)

Whenever I receive an incoming call, the caller ID shows that the phone #, even when I have that number corresponded to a contact. Since I have not much phone # stored s, I have no idea it's someone I know. However, the contact name appears in the diary of appeal, but not on the initial display of incoming call. How can I get caller ID to recognize and display the name of the contact with the phone #? Any help would be greatly appreciated! (I have the blackberry 8520)

Thanks, Lauren

Hello and welcome to the Forums of Support BlackBerry.com.

It could be one of the three solutions... Try these:

1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
* In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
* For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

3. you probably have "Content Protection" located on your address book.
Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

How do I get the name of the caller (no contacts) that displays on the incoming call screen?

Hi all
1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
2 opportunity BB JDE v4.7

3. signed request

4. the request is:

I need to get the name of the appellant on the screen programmatically incall.
I have observed that there are some providers will provide some default/a name on-screen incall.

Note: I am not match the number of incall in contacts and look for the name.

How do I get the name of the caller (no contacts) that displays on the incoming call screen?

can any body help on this.

Thanks in advance

Ratna-

There is no API that provides this information. You can get the number of incoming callers, but not the name of caller ID.

Z10 Z10 ILA BlackBerry does not display the name of the caller of the stored contacts.

My Z10 does not display the names of the callers stored in contacts with a prefix or area code. For example, an incoming call on contact JOHN SMITH, whose number is stored as + 44 7976 667668 shows not her name but just 07976 667668, but if the number of JOHN SMITH has been stored as 07976 667668 (without + 44) then the incoming call appears her name. Does anyone know how to remedy this? or is it a design error / omission by RIM?

This is a known issue with the software currently. Please visit KB33685

How to get the number and the name of the contacts selector

Hi all

I got the Contact Picker work but I have no idea how to get the selected telephone number and the name.

There are attributes that I can put like contactId.value () to retrieve or there is another way?

Thanks in advance.

ImageButton{
                    defaultImageSource: "asset:///images/bluebutton.png"
                    onClicked: {
                        contactPicker.open();
                    }
                    attachedObjects: [
                        ContactPicker {
                            id: contactPicker
                            onContactSelected: {
                                result.text = "You chose contact: " + contactId;
                            }
                        }
                    ]

                }

                Label {
                    id: result
                    text: "You chose contact: "
                }

Hello

You can get the contact name and phone number as this,

ImageButton{
                    defaultImageSource: "asset:///images/bluebutton.png"
                    onClicked: {
                        contactPicker.open();
                    }
                    attachedObjects: [
                        ContactPicker {
                            id: contactPicker
                            onContactSelected: {
                                result.text = "You chose contact: " + contactId;
// call a cpp method to get the details

app.getDetails(contactId); } } ] } Label { id: result text: "You chose contact: " }

the CPP code:

void ContactDetails(ContactId id)
{
Contact contact_info = m_contactService->contactDetails(id);

    QString firstName = contact_info.firstName();
    QString lastname = contact_info.lastName();
        QList phoneno_list = contact_info.phoneNumbers();

    QStringList no_s;

    foreach(ContactAttribute attr, phoneno_list)
    {
        no_s << attr.value();
    }
}

You can get details like this.

Kind regards

Naresh Kodumuri.

Get the name of the caller from an application when the Crier - executing.

Hi all

Here, I'll be back with a new problem which goes as follows:

Suppose that my xyz application stores some contacts (just like in the book addresses/phone book).

Other contacts are by default stored in my Blackberry address book.

Suppose I get a call on the handset with my app xyz running in background. All I need is to retrieve the name of the caller of the xyz application and view this name as"Akash Calling... ' instead of '+ 919999999788 calling... ". "assuming that the caller details are present in the said application, his name and none of the details in the actual address book. Is it feasible. If so, please suggest.

Thanks in advance!

everything in that this is done incoming call:

1. you retrieve the number of the caller in the earpiece of the phone

2. you get the name that corresponds to this number in the background application

3. you create an entry in address book with this name and number

After callIncoming is executed, the system call screen is displayed. The phone app checks if it can find the number in the address book. It finds the number and displays the name.

After that the call is accepted or rejected remove you the address book entry.

Contacts of numbering with number as the name blackBerry Smartphones

OK, first post and here's what I got.

I have contacts to many places retail with a number of store.

example: (in coordinates) name: 1234, last name: Mountainview store.

so I go and click on the Send button to pull up the phone and dial "1234" and it is says "no contacts" and waiting for me finish typing in this 'new' number and hit send.

but, if I have everything start from the home screen and press the Send button to pull up the phone and then press the menu button, then click on "call for contacts" then I can compose "1234" and he pulls up the contact for the Mountianview store, so I press the button send and he composed this contact.

so I need to know if there is a better way to enter the store info in contacts or whatever it is I do, I can type the store number into the phone to have it go back the contact without going to ' menu > call each time from the contacts that I give the floor. I don't want to use the name of the city (call me lazy, it's ok.)

The problem is that the device assumes that if you enter the numbers in the phone app you want to dial a number to hone.

I think that the only work around for just go first the address book and then search for the store number and dial from there

If you Dial on disabled home screen, you can simply type the a button to go to the address book then down using your store number since there with. You are still using the contacts function call but skip the first step of phone application.

Translate the name of SIP - UA number called

Similar Questions

Maybe you are looking for