Translation model

Similar Questions

• Models of Dreamweaver CS5

  How can I change the template that is attached to a file.  I translate a page in another language so I need an English version and a version in Mandarin.  I need another model with the new language on this subject.  I made changes to the English original index.html file (it uses the main.dwt model), renaming index - ch.html.  Now, I need to have the new translated model (main - ch.dwt) related to the index - ch.html file intead of the original.

  Is there a quick way to move from models?  Thank you.

  kcelsi

  The best thing to do is to create a new page of the child to model #2.dwt

  File > new > template Page...

  SaveAs index - ch.html

  Nancy

• Satellite A660 - FN keys no longer work

  Hi all

  Suddenly, I realized that the FN keys are not executed. I reinstalled package extra but the flash card, keys still don't work. Also, I noticed one thing, HWsetup utility does not work: when I try to launch an error message appears on the screen - Microsoft visual c error.
  The problem is that I can't uninstall or reinstall.

  Any solution?

  Message was edited: assignment has been translated + model name has been added

  Please be so kind and offer some info on your machine and your problem.
  What model of laptop do you have?
  Preinstalled operating system?

• dial hard peer correspondent

  Hello

  I need help with this.  We have a dial out peer and it is mapped on the incoming side and calls do not come out to the carrier.  Instead the tower to the PBX.

  PBX: 10.21.10.12

  Carrier: 1.1.1.1

  LAN cube: 10.21.10.250

  The call: 13053284888

  Called: 8889990 * 3051234567

  !

  Dial-peer voice voip 200

  Carrier1 description come OUT

  translation-profile outgoing Carrier1

  destination-pattern 1 [2-9]... [2-9]......

  session protocol sipv2

  session target ipv4:1.1.1.1

  !

  Dial-peer voice voip 201

  Description INCOMING FS

  destination-model ^ 1... $

  session protocol sipv2

  session target ipv4:10.21.10.12

  --------------------------------------------------------------------------

  GUEST sip:[email protected]/ * / SIP/2.0
  Via: SIP/2.0/UDP 10.21.10.12:5080; rport; branch = z9hG4bK4FSD31mDDt79e
  Max-Forwards: 69
  From: "1001" <> [email protected]/ * / >; tag = 4FcXBHZ4X3tZg
  To: <> [email protected]/ * / >
  Call ID: d49e922e-09be-1235-41bf-005056820b2e
  CSeq: INVITATION 97726988
  Contact: <> [email protected]/ * /: 5080; transport = udp; GW = f170dc57-cdf4-4115-933 c-7c9b5d4e1fed >
  User-Agent: FreeSWITCH
  Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, CONSULT, INFORM
  Supported: timer, path, replaces
  Allow-events: talk, waiting, Conference, see
  Content-Type: application/sdp
  Content-Disposition: session
  Content-Length: 289
  X - accountcode: 10.21.10.12
  X-FS-Support: update_display, send_info
  Remote-Party-ID: "1001" <> [email protected]/ * / >; left = call; screen = yes; intimacy = off

  v = 0
  o = FreeSWITCH 1476108761 1476108762 IN IP4 10.21.10.12
  s = FreeSWITCH
  c = IN IP4 10.21.10.12
  t = 0 0
  m = audio RTP/AVP 0 8 3 101 13 17344
  a = rtpmap:0 PCMU/8000
  a = rtpmap:8 PCMA/8000
  a rtpmap:3 GSM/8000 =
  a rtpmap:101 telephone-event/8000 =
  a = fmtp:101 0-16
  a = rtpmap:13 CN/8000
  a = ptime:20

  * 10 Oct 18:35:19.261: //-1/213CC85D9ABD/CCAPI/cc_api_display_ie_subfields:
  cc_api_call_setup_ind_common:
  Cisco-username = 13053284888
  -ccCallInfo IE subfields-
  Cisco-ani = 13053284888
  Cisco-anitype = 0
  Cisco-aniplan = 0
  Cisco-anipi = 0
  Cisco-anisi = 1
  dest = 8889990 * 3051234567
  Cisco-desttype = 0
  Cisco-destplan = 0
  Cisco-ISDS = FFFFFFFF
  Cisco-rdn =
  Cisco-rdntype = 0
  Cisco-rdnplan = 0
  Cisco-rdnpi =-1
  Cisco-rdnsi =-1
  Cisco-redirectreason = - 1 fwd_final_type = 0
  final_redirectNumber =
  hunt_group_timeout = 0

  * 10 Oct 18:35:19.261: //-1/213CC85D9ABD/CCAPI/cc_api_call_setup_ind_common:
  Interface = 0x23036E14, call Info)
  Number = 13053284888, (Calling Name =) (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed).
  Called number = 8889990 * 3051234567(TON=Unknown, NPI=Unknown);
  The appeal translated = FALSE, Subscriber Type Str = unknown, FinalDestinationFlag = TRUE,
  Incoming dial-peer = 200, progress Indication = NULL (0), Calling THE Present = TRUE,
  Road Trkgrp Label source, label Trkgrp road target = CLID Transparent = FALSE), call Id = 1530
  * 10 Oct 18:35:19.261: //-1/213CC85D9ABD/CCAPI/ccCheckClipClir:
  In: Component number = 13053284888 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed)
  * 10 Oct 18:35:19.261: //-1/213CC85D9ABD/CCAPI/ccCheckClipClir:
  Departures: Component number = 13053284888 (TONE = unknown, NPI = unknown = User, spent, screening presentation allowed =)
  * 10 Oct 18:35:19.261: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

  * 18:35:19.261 Oct 10: cc_get_feature_vsa success of malloc
  * 10 Oct 18:35:19.261: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

  * 18:35:19.261 Oct 10: number of cc_get_feature_vsa is 1
  * 10 Oct 18:35:19.261: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

  * 18:35:19.261 Oct 10: the FEATURE_VSA attributes are: feature_name:0, feature_time:592111880, feature_id:1482
  * Oct 10 18:35:19.261: / / 1530, 213CC85D9ABD, CCAPI, cc_api_call_setup_ind_common:
  Set up the event sent;
  Call Info (number = 13053284888 (TON = unknown, NPI = unknown, screening = User, spent, presentation = allowed),)
  Called number = 8889990 * 3051234567(TON=Unknown, NPI=Unknown))
  * Oct 10 18:35:19.261: / / 1530, 213CC85D9ABD, CCAPI, cc_process_call_setup_ind:
  Event = 0x22C44B78
  * 10 Oct 18:35:19.261: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
  Try again with the demoted called number 8889990 * 3051234567
  * Oct 10 18:35:19.261: / / 1530, 213CC85D9ABD, CCAPI, ccCallSetContext:
  Context = 0x3DF0A054
  * Oct 10 18:35:19.265: / / 1530, 213CC85D9ABD, CCAPI, cc_process_call_setup_ind:
  > Handed CCAPI cid 1530 with tag 200 app '_ManagedAppProcess_Default '.
  * Oct 10 18:35:19.265: / / 1530, 213CC85D9ABD, CCAPI, ccCallProceeding:
  Progress Indication = NULL (0)
  * Oct 10 18:35:19.265: / / 1530, 213CC85D9ABD, CCAPI, ccCallDisconnect:
  Value = 1, Tag = 0x0, entry calls (previous disconnection Cause = 0, remove the Cause = 0)
  * Oct 10 18:35:19.265: / / 1530, 213CC85D9ABD, CCAPI, ccCallDisconnect:
  Value = 1, entered calls (Responsed = TRUE, Cause value = 1)
  * Oct 10 18:35:19.265: / / 1530/213CC85D9ABD/SIP/Msg/ccsipDisplayMsg:
  Envoy:
  SIP/2.0 100 trying
  Via: SIP/2.0/UDP 10.21.10.12:5080; rport; branch = z9hG4bK4FSD31mDDt79e
  From: "1001" <> [email protected]/ * / >; tag = 4FcXBHZ4X3tZg
  To: <> [email protected]/ * / >
  Date: Monday, October 10, 2016 18:35:19 GMT
  Call ID: d49e922e-09be-1235-41bf-005056820b2e
  CSeq: INVITATION 97726988
  Allow-events: telephone-event
  Server: Cisco-SIPGateway/IOS-15.2.4.M7
  Content-Length: 0

  * Oct 10 18:35:19.265: / / 1530/213CC85D9ABD/SIP/Msg/ccsipDisplayMsg:
  Envoy:
  SIP/2.0 404 not found
  Via: SIP/2.0/UDP 10.21.10.12:5080; rport; branch = z9hG4bK4FSD31mDDt79e
  From: "1001" <> [email protected]/ * / >; tag = 4FcXBHZ4X3tZg
  To: <> [email protected]/ * / >; tag = 969 D 148-ACD
  Date: Monday, October 10, 2016 18:35:19 GMT
  Call ID: d49e922e-09be-1235-41bf-005056820b2e
  CSeq: INVITATION 97726988
  Allow-events: telephone-event
  Server: Cisco-SIPGateway/IOS-15.2.4.M7
  Reason: Q.850; cause = 1
  Content-Length: 0

  * 10 Oct 18:35:19.265: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
  Received:
  SIP ACK:[email protected]/ * / SIP/2.0
  Via: SIP/2.0/UDP 10.21.10.12:5080; rport; branch = z9hG4bK4FSD31mDDt79e
  Max-Forwards: 69
  From: "1001" <> [email protected]/ * / >; tag = 4FcXBHZ4X3tZg
  To: <> [email protected]/ * / >; tag = 969 D 148-ACD
  Call ID: d49e922e-09be-1235-41bf-005056820b2e
  CSeq: ACK 97726988
  Content-Length: 0

  Always 2 dial peers matching a dial incoming peer and a dial out peer.

  so now the counterpart of incoming dial from freeswitch you need a counterpart of incoming dialing, probably get you matched on component number (who represents the family number (s) call number on the freeswitch. then put a translation model to the same inbound dial peer, who 8889990 prefixes * the outgoing dialpeer to create a n, which corresponds to 8889990 * 3051234567 as a model and that it points to the IP address of) your carrier.   That's the theory, you must follow

• Question regd import/export feature of CUCM BAT

  Hello

  We have a production cluster CUCM 8.6 running.

  I was asked to create models of translation of 300-400.

  I see that I can not do this directly through bat. But I can't see the import/export option.

  We have 1000's of existing patterns of translation on our system.

  I have a small question about the import feature.

  A new import overwrites existing data in the database that contains the data in the import file or because the new data in the import file added to the existing data.

  If the import file has only the new models of translation, it will eliminate the existing patterns of translation in the system?

  I don't have a system of cucm lab to verify this behavior?

  Can you please help me on this query?

  Thank you

  Pete

  I often do and it's the only way to bulk add translation models. It removes all the reasons for translation it will only add/edit the translation model. If all the new models it will simply add your new entries.

• Transformation of the party calls for different incoming calls whose previous number value (0)

  Community salvation.

  If you see my other discussions created the last days, I managed to configure some functions on our 6.2.1 CallManager. that we really needed.

  But there is a problem and I would like to ask you once again.

  Our internal Cisco phones have 3-digit extensions, from 100 to 999. We had the problem one 0 prerequisite not indicated for missed calls, which I fixed in a translation model that adds two '00' to any incoming call. For outgoing calls, one is removed by the CallManager (PreDot), so called work very well.

  BUT: the translation model that adds the two 00 only works 100% with 10 digits of the external numbers. For example: If a mobile with 0170555yyyy calls an internal number, it is translated to 00170555yyyyy (without translation, it is only 170555yyyyy) and recall works very well. If instead a mobile with 0170555yyyyyzz calls an internal number, it is translated to 00555yyyyyzz. The reason that seems logical: the translation has the value "00xxxxxxxxxx". So it works only with external 10-digit numbers.

  What should I do to make it work with ANY external number? So who calls internal phone - gets two leading '0' being the tracking number by the rest of the caller id?

  Can be simple - but I do not see the answer. :-(

  Thank you. Kind regards.

  Oh, I see what's wrong. You don't need any call mask part xform. Leave the field blank and just add the prefix...

  Please note all useful posts

  "opportunity is a haughty goddess who don't waste no time with those who are not prepared."

• Transfer outside the telephone line to another user of domain?

  I have a user (user A) who must transfer an overview on his phone to another phone user (user B).  On the phone from user B, I changed the outside line in the mask of Destination AAR and external phone number mask in Call Manager Administration.  Also does the same on the user of A phone.  It does not work.  Offline rang again on the extension of the user and not on user B.  Went to the switch and changed ports as well, always the outside line still rang on the extension of the user and not on the extension of user B.

  Information for users in administration unit call manager has also been changed to reflect the changes.  The issue has not changed.  Is there another place to have the outside phone line and more changed where I changed it already?

  The version of Cisco Unified Call Manager Administration is 7.1.5.32900.2

  The phones in question are 7940's

  Any information anyone can provide will be extremely useful!

  Thank you

  John Gorski

  Milton school district

  Milton Wisconsin

  Simply create a translation model then to change the number called to your desired destination.

  Chris

• Long numbering on UC540

  Hello

  Here I meet a problem a little solo on a UC540, when the boyfriend he has elapsed while 12 to 15 seconds before the first ring. My outgoing dial plan is correct, the 0 is defined pour out via the SIP then Kylian Standard than 9 out only on the Standard, after comparison it turns the output via the standard is 3 times faster than the output via the SIP. I so contact my provider SIP (OpenIP) pour check with them setting up if everything was OK and d ' after them no, so I turn to you pour whether he didn't no of staff of the United Nations list somewhere in the UC540 that would manage this function of time.»

  PS: even with a # at the end the numbering this does not change the time.

  Thank you

  Hello

  I do not know the OpenIP configs but your concern reflects a problem of destination-model.

  By default, you have this:

  Dial-peer voice voip 1002

  corlist outgoing connexianslst

  Description * outgoing g729 *.

  translation-profile outgoing xxxxxxx_out

  destination-model 0 t

  codec voice-class 2

  session protocol sipv2

  session target sip-Server

  DTMF-relay rtp - nte

  No vad

  This model destination with the T to fin attends a time-out for send the dialed digits.

  So do not wait for the timeout, created a new dial-peer with United Nations translation model that corresponds to 'faster' the 10 entered digits:

  destination-style 0...

  Hervé

• Cannot delete second line to Jabber for Tablet on CUCM device

  Hi all

  The feature we're trying to make is that people will have different DNs to their phones to desktop and Jabber for iPad devices, but when you make a call from iPad, the DN of desk phone will be shown. I was test the functionality of main extension in the CUCM, but it is not working properly so far. And now, I added two different DNs to a Jabber for Tablet and can not remove the other of 'button Elements change '. It gives the following error:

  Update failed. TypeDbErrors.gen25083 Any ideas on how to solve this problem? Any ideas on how to use the functionality of the main extension? Kind regards Fikri Environment: CUCM 8.6.2 For iPad 9.3.2 Jabber / Jabber for iOS 9.6

  I remove the device and re-create or remove the DN and then put back on the devices on what belongs. The only real way to solve this would be a case of TAC, so they can open a default for you.

  Main extension is not used in all States to display alert/connected. The only way to achieve this would be a lot of bosses/partitions/CSSes translation very complicated with requesting party transformations. For example, if your DN desk phone was 2000, but the DN tablet was 3000, the translation model that must match for each call number must transform the appellant to 2XXX.

  If you would like an opinion, it is bad design. You send a person to a separate address for their office or their smartphone. CUCM is designed to work the same way: you call a user, not the device.

  Please remember useful frequency responses and identify useful or correct answers.

• Model translation error specify a valid target language territory

  Hi team,
  
  I'm translating my model of the English to the French language.
  
  
  I am trying to download my file .xlf but it gives me the error below.
  
  The translation file downloaded is not valid. It must specify a valid target language and territory. Please check that the file is in the correct format.
  
  I'm working on Oracle EBS 11i.
  
  Can someone help me how to overcome this problem.
  
  Kind regards
  Ajay
  
  Published by: Ajay on January 7, 2013 05:44

  Hi Ajay,
  You can try the options below.

  -Set up of utf-8 (iso-99) /(ISO-8859-1)? at the top of the translation file, you can open in wordpad or something else.
  -Change the value of 'CH' to 'EN'

  I would like to know the result of pls.

• &amp; quot; This change would require an amendment to the code that is locked by a model or a translator. &amp; quot;

  I'm creating a template. As I go along, I test by creating, editing and saving pages made of him.
  
  All of a sudden, I started getting this error when I try to apply a CSS style for the editable region of content.
  
  "This change would require changing the code that is locked by a translator or a model."
  
  This will not occur when you change the other editable regions.
  
  I did a search of this forum and tried the suggestion to remove the founder of page which has not made a difference. I don't want to remove the CSS because I'm precisely apply a style to text in this region.
  
  This started happening a few hours ago and it does not in itself unfortunately.
  Thanks in advance for any ideas.

  For what it's worth, the culprit was the inclusion of the editable area
  IN a tag, i.e.,.

  
  ALT ="" width = "435" height = "1" / > "
  
  
  
  

  Since is an inline tag, and the editable region is * INSIDE * the
  tag Inline, you cannot paste block tags in there. This is what has been launched
  the error and why it has happened when you tried to change this
  region.

  The same thing would have happened if this interval had been a

  tag , or
  also, since you cannot paste block tags in their midst, no more.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "buttercupnli" wrote in message
  News:eqdp84$D3K$1@forums. Macromedia.com...
  > Well, this is now fixed! I have rebuilt everything again from scratch. There now
  > work
  > fine.
  >
  > That devil knows what was going on...
  >
  > Thanks for your help ACE. I hope that I never see this bug again. But anyway,.
  > I am
  > scared I'll...
  >

• process model: include PreUUT and PostUUT step translates report

  Hello everyone,

  Little background:

  My test team has 4 writing code developer for 4 different components. The endurance test, we have common requirements as variable input voltage and of the temperature. Instead of using the common installation model, we prefer to use PreUUT of TestStand process model element. This helps each of follow us strict coding style.

  Problem:

  There are many examples to record the results of PreUUT and PostUUT in the report. However, all of these examples require change in file client sequence. How to implement this feature in the process template itself? So that developers do not have to ModelCallback process or use patterns in their code and still the tension updated the and temperature in ProcessModel could be connected to the report.

  Ah yes, I use TestStand 2013 (4.1)

  Concerning

  Benjamin

  Thank you, Julian.

  Some of your other posts has helped me solve the problem of the PreUUT. I don't know if this is the correct method, but it works very well for me.

  Did the following:

  1. in the ProcessModel activated sequence result record for any stage in PreUUT sous-séquence.

  2. in PreUUT sous-suite added after declaration-

  "" 'RunState.ProcessModelClient.Data.Seq ["MainSequence']." Locals.ResultList = Locals.ResultList

  And voila, I PreUUT step results in my report. I would like to have feedback on your part. Is this a good method? do you see any risk?

  The next challenge online is now to log PostUUT results in the report.

  Kind regards

  Benjamin

• Dependent on model MWI signal of translation

  I have overlapping 4-digit DNs, so I created XLate models to allow 4 digits to dial within cities, but the composition between with site specific codes assigned to each city 6-digit. I'm having is with MWIs. I can get the unit to send the string I want, but CCM does not pass through the analysis of numbers with all signs intact. See the attachment for more details.

  CCM = 4.0 (2A) SR2c (cluster of 2 servers)

  The unit = 4,0000 SR1 (unified w/failover)

  If there is a better way to maintain the composition in a DN 4-digit defined unoverlapping the area and use the composition for between 6-digit sites...

  In my view, there is a service parameter in CCM called MultiTenantMWIMode that you must enable. This is mentioned in the guides for the integration of the CCM unit. It is part of the process "To Set Up the Voice Mail Service settings of the server" in the section "programming of the Cisco CallManager phone system.

  Kind regards

  Eric

• "This change should change the code which is locked by a model or a translator. The ch

  Comes now when I upgrade to 5.5 CS6 I even get when you use a template! My site is built using models, so it's very annoying - should I this forward when you use CS6?

  It seems that one of the models I use was the cause of the problem. I deleted

  He and recreated a new - seems to have solved the problem for now.

• Translator - ICERegions.htm &amp; SSI.htm of server model load error

  I've recently updated my installation of Adobe Dreamweaver CS4 (of Adobe CS4 Design Premium) using your automatic update feature.  About a day later, I was working in Mode APP DEVELOPER MORE and noticed that a few lines of text changed color in the document.  I changed the orientation of the view code and access these provisions of the code and noticed one unusual element "police" surrounding each of the updated text internal.

  Shortly after the change in focus to the designer pane a modal dialog box alert appeared with the following text:

  "The following translators were not loaded due to errors: ICERegions.htm: contains configuration information that his draw."  Server model SSI.htm: has configuration information that is invalid. ' (see image below)

  

  What does this mean error (I don't see no link with javascript).

  Brett

  PS-

  My system consists of the following:

  OS: Windows XP Professional

  Processor: Intel Core 2 Duo E8500, 3.16 GHz CPU

  Memory: 2048 MB

  I just wanted to let people know who may be affected by the same error that I also had this problem. To fix this try the following steps.

  1) close Dreamweaver CS4

  2) sail to:
  C:\Documents and Settings\ [UserName] \Application Data\Adobe\Dreamweaver CS4\ [language] \Configuration

  3) rename (I do not delete things just wrap I need later for some reason any):

  WinFileCache-[numbers] .dat to WinFileCache-[numbers] old.dat

  
  

  4) launch Dreamweaver CS4

  The issue has disappeared and are no longer due in 4 simple steps. She also started happening after a recent update.

  Happening throughout coding, when I loaded a file, and when I saved a file. I hope this helps someone, thank you for all the advice above me!