Transparent caching.

Similar Questions

• How my history and the transparent cache without being put in place to do?

  One morning my internet history and cache magically allowed and my options are not set up to do. Since my history and cache have been very well and not affected. Could someone please explain any possible reason as to why he would do this.

  It is possible that Firefox did not close properly when he arrived.

  Try using ' Firefox/file > exit ' (Mac: ' Firefox > leave ";) Linux: "file > exit ') to close Firefox if you're doing that by clicking on the X close in the title bar.
  
  Using this method to close Firefox can work better.

• transparent cache

  my cache eight points has disappeared from my list of effect, where can I get this back?

  See here:

  What happened to Premiere Pro cache in cc 2015

• Why should I use only 16 points in the transparent cache sixteen points?

  in some cases I need more than 30 points to cover the frame

  You must update your version of first.

  

• Storage of ThinkPad Twist

  Hello!

  This will be like a silly question, but I can't answer on my own, so I thought I would ask here.

  My company has just purchased a Lenovo's ThinkPad Twist for me (I'm a big fan of Lenovo). I'm just trying to give a sense specifications for storage. In my local disk system details, he said I have a 456 GB HDD (which I understand to be the hard drive), but on the fact sheet on the product, it says 128 GB SSD (that I understand to be a solid state drive). I think it means that I have both, in other words, I have storage hybrid, right? And if I don't have a hybrid storage, is it correct to assume that the solid state drive is used to store my files on the system and it is inaccessible as usable for me storage space, right? I noticed that the speed at which the system starts and I know that it is an advantage of SSDS. I like that!

  I learn only recently on the SSDS and I am eager to learn more. I would appreciate any information anyone! Thank you!

  

  The most common for a twist storage options are either:

  (1) HARD drive coupled with a small mSATA SSD storage (about 24 GB) hybrid. In this configuration, the SSD is used only as a caching drive. Transparent caching disk data caches to speed up startup and operating system and is generally not accessible to the user. If you have a caching drive, it is usually as a disk 1 tab of the Task Manager performance and disk 0 is normally the main drive.

  (2) SSD without disk caching. More full-size SSD being faster than the getting started disc cache which is included on these models, there is no point in adding in an mSATA cached disk.

  Your business could have gone with configuration, either a custom when ordering the machine configuration. You can watch the PO to determine how your company has decided to set up the machine.

• Appellant not ringing before connecting edge

  I used to live in a place with bad signals LTE so I stopped using the appellant advance. I recently moved so I was him giving a run once again. After turning on advance call back, I used to hear the ringtone before making a connection, now I have not. It is silent, until a connection is made. I rebooted my phone without success. Someone at - it experience with this problem or knows how to solve? I really don't want to make a transparent cache because they take 20 + minutes on my device. Variant of 64 GB. This will be my next step however.

  
  

• Impossible to install W8.1, impossible to install the KB2862973 update with error code 80073712, cannot connect to the microsoft account

  I have 64-bit Windows 8 and all these problems started when I tried to install the 8.1 update.  Whenever I try to go to the store to update to 8.1 I get the error message saying "we were unable to connect to the store. This could have happened due to a server problem or network connection has expired.  Please wait a few minutes and try again. "So I looked at this topic and you have tried all the tips of help from Microsoft, convenience stores, store transparent cache, etc. etc. etc. etc.. I can not connect to the store at all. Now I can't change users to a Microsoft account because it tells me that when I try that "we could not connect to the Microsoft services right now.  If this problem persists, look for 'referee' on the start screen. "I also performed this task without success.  Then I have a Windows update KB2862973 that fails to install and gives the error code 80073712.  I looked for solutions to this problem, and those who have tried unsuccessfully.  I really need someone to tell me how to fix all these issues, because I believe they should be linked.  It is a desktop pc Dell that is connected to the internet without any problem and is only about 1 year. I am tech savy, but need HELP!

  Thank you

  Shane

  Thanks for the detailed response. This problem may be caused because corrupted Windows Update components.

  I suggest you to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  If the problem persists, then I suggest also that you can run the DISM commands using the following link: http://support.microsoft.com/kb/947821

  Keep us informed.

• Circular frame

  I work in a project of 1920 x 1080 in first 10 elements. Curious to know if there is a way to cut a circle for a clip plays in a circular frame. (with a black screen outside the circle)  Of course it would save a part of the image which I am fine with to try this idea.

  adobenewbie123

  How are you doing with your second look at the creation of your circle in the titration of 10 items first?

  Right now, you should have the circle created with space inside the circle for your movie.

  Now, the rest of the story.

  Title of your circle on the video Track 2

  Your video on the video 1 track

  But, no matter what you do, you will see the photograph of landscape, beyond the circle. Then...

  Go to change the header video/effects/keying effects and choose one of the caches to hang out in

  the video on the video 1 track. (Maybe start with the cover sixteen points.

  Principle of mast garbage... Everything in the cache points is visible, nothing outside of the transparent cache is not.

  Highlight / video selection on the video 1 track and take the Garbage Matte points and use them to set the video as a circle.

  

  Tips...

  To see these dots on the screen to settle in place, in the video properties, have 16 points

  Garbage Matte Panel selected (highlighted black see Panel).

  To make sure that you have chosen track (video on the video track 1), right click on the screen, select Select, and

  Make sure that you have selected the name of the video on the video 1 track.

  RTA

• Content Flash (i.e. games) does not save

  I had this problem since at least Flash 10... hoped that 11 is going to fix it, but no dice.  I'm pretty sure 100% that it was an upgrade to PS that caused this, because he has no other changes to the system before it started to happen (other than Flash updated).  Here's what's happening.

  I use Chrome, my wife uses IE.  She IE set to erase the cache, cookies, etc., whenever it comes out.  The problem is, apparently, there is something in the way Flash handles the content in browsers which causes all my saved content Flash in Chrome be struck through, when it leaves IE.

  For example, if I play a game, say, armorgames.com, I can save my game very well. If I close and reopen the Chrome and revisit the site, my backup data set will always be there.  However, if I save my game and close Chrome, then my wife load IE and closes, if I return to the game in Chrome, my save data are gone.  This happens on all websites where Flash stores local content.  Sometimes, even if it does go to the same sites I go to.

  As I see it, there are only 3 solutions to my problem.  That, my wife and I could use separate computers (not really an option because we cannot immediately another machine).  Two, she can stop having IE erase all personal data to the output (also not an option, she prefers to maintain a certain level of privacy protection when she sails).  Three, Adobe may deliver a fix for Flash Player that prevents this from happening.

  One question: the same thing would happen if she used the InPrivate browsing for each session of IE?  Or this removes still saved locally all the Flash content to the output?  If it's a viable option, please let me know.  If there is no alternative workaround for this, I'd be happy to try.

  Here is how I have the options set on the Settings Manager:

  Global storage settings - 1 MB of space allowed; «Allow third-party Flash content...» "and"store common Flash components... ". "is both checked

  Storage site settings - I had this game at 1 MB, but while they inspected again this afternoon, it has been reset to zero. I went to a different tab and then back to the storage site and it was back to none... This could be the problem?  If so, how should I do?

  Now, some features of the system.  The two browsers (IE, 8.0.7601.17514, Chrome 14.0.835.202 m) having the latest version of the installed PC.  System is running Windows 7 Home Premium 64-bit.  Any other stats available on request.

  Thanks in advance!

  I have confirmed that your option for your wife use private browsing would be viable.  the LSO is kept in memory and is erased when it ends its session.  so make sure you turn off the transparent cache when closing in IE and have her use the private browsing feature.  You can probably pass a parameter in the shortcut.

  • Right click on the shortcut to IE > properties
  • Add "-private" without the quotes in the path of the shortcut
  • Save the changes
  • Double-click the shortcut
  • You should be in by default private browsing

• Major project of Greenscreen.  Workflow?

  Just curious as to what that all the workflows for a larger project of greenscreen.  I don't usually do a lot of greenscreen, maybe 15 cups worth on 3 Staples per project.

  But now I have a larger project with cameras shots 40 + x 3 each (Multicam) and now I'm get boggled down.  My project is starting to look like a war zone, and I'm looking for an alternative.

  MY CURRENT WORKFLOW

  1. I import my images of GS to PP chronology.
  2. Ask 4 cameras sequence in a sequence of 'root level' to synchronize multicam as usual. (layers 1-4).
  3. Drop 'root' the sequence in a sequence of 'MC', select edit, etc. (the normal drill for editing multicamera) MC
  4. Make my cuts, remove the fat
  5. back to my sequence root of the MC (where are my 4 cameras), send each clip to After Effects for the strike and the camera color matching via dynamic links.
  6. Go back to the first and complete Keylight and my other corrective color layers on the clips do not see me real time at first, so I
  7. make on a weak ground. MOV w / alpha of each element of the AE - clips of proxy (adding images more to my project)
  8. Move at full resolution, dynamicaaly what AE related to key clips (my those final, good) on 5-8 layers
  9. Proxy place clips on layers 1-4 at level root of Multicam on top.
  10. Proxy videos get good reading
  11. Continue edititing project until everything is perfect
  12. Back to all my root multicam sequences and swap linked what AE comps proxies. (and I hope that I don't miss any)

  Surely, I am doing something stupid here because when I am all done, I have a gazillion clips everywhere and a bazillion what AE comps everywhere too.  Suggestions for the way YOU work or when you think I'm on leave would be greatly appreciated.

  Thank you!

  Well, certainly start with a transparent cache (probably at least point 8) around the subject. This eliminates a large part of the screen that you don't have to worry about keying (which you can see in the clip of mast).

  I use the Eyedropper to select the color of the screen; Hold CTRL for example a slightly larger region - and click a few different place around until you find the best color to start with. Then I go back through the mast build settings to set the matte; I've usually drag them on full-tilt and then again until I get a good clean key. It is convenient to be able to see the screen and alpha at the same time, so open a reference monitor and Alpha; This way you can let the exit effect Composite value. You will need to disable your background layer, however, you can see the effect of the alpha in the reference monitor (as a sequence is really transparent, not black).

  Once you get the screen twisted, deepen Matte Cleanup to refine the edges. If you have a good key implemented in the production of mast, should not to really do much here - and a little goes a long way. Finally, Supression of spills can help you clean up the edges, where you will have a small green purge - especially if your subject is a bit too close to the screen. I do not use the ultra Color Correction; It is super basic, and given that the other more powerful CC effects are GPU accelerated, they work great if you stack them after the Ultra twist right off to key.

  It is very common practice when it comes to typing, as you probably know. A lot of it has to do with the right material to begin with, but I've even saved some really terrible shots with Ultra. Once you get a hang of works Ultra, you can check out through your entry work - preview real is a huge advantage.

• Beginner: logo to take the bottom hand like clean background

  Hey guys,.

  
  

  Currently I'm learning Fireworks & dreamweaver through tutorials. I have a logo (white with text) that I want to put on a red background that has a gradient.

  
  

  I tried to give him a transparent cache and tried to use red in the background, the two wasn't satisfying.

  
  

  How can I do this?

  
  

  Thanks for any help.

  Place the text logo on a transparent background layer or a workspace.  I use Fireworks but in Photoshop, it would be a checkered background.  Save for web in PNG or GIF transparent.  Jpg does not support transparency, but the GIF and PNG images only.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Remove the video color gradient background - need help

  Hi all

  I turned my son play the violin on a white background today and what was white pure didn't turn out to be very white, I have gray

  areas, out of white areas because of the poor lighting.

  I want the background to be whiter and more even than it is right now.

  I thought of the video from track 1 to track 2.

  I added a title, which consists of a big white box (using the tool of retangular I just drew a large white retangle which covers the surface of entire movie)

  Now to remove some of this background white, I thought I would try some of the tools below to remove the real backdrop and let the white retangle

  track 1 come through. (so that the pure white comes through track 1).

  I was going through the different options.

  -Chroma Key

  -Color key

  -Color change

  -Change color

  After 30 minutes of autour fldding, I thought I would just stop and ask for help.  How would you proceed with this?

  What process would you use?

  I'm just puzzled as to which tool is best suited for a job like this, because for now, my results are not to my taste and it is difficult to get something

  It looks well at all.

  Thanks for any help,

  Dave.

  Dave,

  If you happen to have the Ultra CS3, this would be my first choice. Following would be Keylight in AE. If you do not, you can try to remove a part of the background with a transparent cache and try to key in PR remains with chroma keying.

• How to see a data in IP_IN_QUEUE

  Hi gurus B2B.
  
  I test an incoming transaction, I m, place the file in the local folder to allow B2B to recover the file. I send you an OAGIS xml file. While creating an agreement I select delivery.
  
  In his full view B2B, but I can't find the paper in. I'm looking for IP_IN_QUEUE in the newspaper, but I'm not able to see that Mr.
  
  Please tell me how I should question in b2b database, to check what transaction it is. I want to know if he had gone to IP_IN_QUEUE or not. My backend application will choose the file, but it showing that no file found...
  and
  Agree if we choose an instad of AS2 delivery channels, the message will go through IP_IN_QUEUE.
  
  Please help me.
  
  2009.10.26 to 05:05:42:248: principal: B2B - initialize B2B (DEBUG)
  2009.10.26 to 05:05:42:251: hand thread: B2B - (DEBUG) is hand thread runs...
  2009.10.26 to 05:05:42:252: hand thread: B2B - beginning of B2B (DEBUG)
  2009.10.26 to 05:05:42:253: hand thread: B2B - B2B (DEBUG) start - context started
  2009.10.26 to 05:05:42:272: B2BStarter wire: B2B - (DEBUGGING) B2BStarter - this is B2BStarter thread running...
  2009.10.26 to 05:05:42:284: B2BStarter wire: B2B - (DEBUG)
  *************************************
  Maximum segment size = 531628032
  The allocated memory = 8323072
  Free memory = 7166312
  *************************************
  
  2009.10.26 to 05:05:48:312: B2BStarter wire: B2B - (DEBUGGING) B2BStarter - initialized context
  2009.10.26 to 05:05:53:150: B2BStarter wire: B2B - (DEBUGGING) B2BStarter - B2B start
  2009.10.26 to 05:05:53:151: B2BStarter wire: B2B - (DEBUGGING) B2BStarter - from B2B
  2009.10.26 to 05:05:53:173: B2BStarter wire: B2B - B2BStarter (DEBUG) - obtained configuration
  2009.10.26 to 05:05:53:174: B2BStarter wire: B2B - (DEBUGGING) B2BStarter - global transparent cache
  2009.10.26 to 05:05:53:342: B2BStarter wire: B2B - (DEBUGGING) XEngine does not. So no need to delete cached inside XEngine objects.
  2009.10.26 to 05:05:53:569: B2BStarter wire: B2B - (INFORMATION) repository: print: [0] HL7 MLLP Exchange
  2009.10.26 to 05:05:53:569: B2BStarter wire: B2B - (INFORMATION) repository: print: [1] EDI X 12 via AS1
  2009.10.26 to 05:05:53:570: B2BStarter wire: B2B - (INFORMATION) repository: print: [2] Document custom during the generic Exchange
  2009.10.26 to 05:05:53:571: B2BStarter wire: B2B - (INFORMATION) repository: print: [3] EDI EDIFACT on generic Exchange
  2009.10.26 to 05:05:53:572: B2BStarter wire: B2B - (INFORMATION) repository: print: RosettaNet [4] on RNIF
  2009.10.26 to 05:05:53:573: B2BStarter wire: B2B - (INFORMATION) repository: print: EDI [5] X 12 via generic Exchange
  2009.10.26 to 05:05:53:573: B2BStarter wire: B2B - (INFORMATION) repository: print: [6] Document custom MLLP Exchange
  2009.10.26 to 05:05:53:574: B2BStarter wire: B2B - (INFORMATION) repository: print: [7] Document custom AS1
  2009.10.26 to 05:05:53:575: B2BStarter wire: B2B - (INFORMATION) repository: print: [8] EDI EDIFACT on AS1
  2009.10.26 to 05:05:53:576: B2BStarter wire: B2B - (INFORMATION) repository: print: HL7 [9] during the generic Exchange
  2009.10.26 to 05:05:53:576: B2BStarter wire: B2B - (INFORMATION) repository: print: [10] Document custom MAE
  2009.10.26 to 05:05:53:577: B2BStarter wire: B2B - (INFORMATION) repository: print: [11] Document custom on the Internet
  2009.10.26 to 05:05:53:578: B2BStarter wire: B2B - (INFORMATION) repository: print: [12] EDI X 12 on the Internet
  2009.10.26 to 05:05:53:579: B2BStarter wire: B2B - (INFORMATION) repository: print: [13] EDIFACT EDI on Internet
  2009.10.26 to 05:05:54:314: B2BStarter wire: B2B - cert.ID (DEBUG) repository: constructCertSQL SELECT, cert. CLASSTYPE OF TIP_Certificate_ra cert, part TIP_Party_ra, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted! = « Y »
  2009.10.26 to 05:05:55:329: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize enter
  2009.10.26 to 05:05:55:608: B2BStarter wire: B2B - XEngine to start (DEBUG).
  2009.10.26 to 05:05:56:223: B2BStarter wire: B2B - (DEBUGGING) = false oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize icCompatible
  2009.10.26 to 05:05:56:224: B2BStarter wire: B2B - (DEBUGGING) = 0 oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize identifyFromTP
  2009.10.26 to 05:05:56:225: B2BStarter wire: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize enablePreprocess = false
  2009.10.26 to 05:05:56:226: B2BStarter wire: B2B - output oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:initialize (DEBUG)
  2009.10.26 to 05:05:56:243: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize entry
  2009.10.26 to 05:05:58:500: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize output
  2009.10.26 to 05:05:59:221: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:initialize entry
  2009.10.26 to 05:05:59:222: B2BStarter wire: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
  2009.10.26 to 05:05:59:223: B2BStarter wire: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
  2009.10.26 to 05:05:59:289: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
  2009.10.26 to 05:05:59:420: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:initialize clear Cache TPA
  2009.10.26 to 05:05:59:421: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool size 0
  2009.10.26 to 05:05:59:447: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:initialize response process as request = false
  2009.10.26 to 05:05:59:448: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:initialize output
  2009.10.26 to 05:05:59:448: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
  2009.10.26 to 05:05:59:449: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.transport.TransportInterface:initialize initialize Transport Logger.
  2009.10.26 to 05:05:59:459: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
  2009.10.26 to 05:05:59:587: B2BStarter wire: B2B - (INFORMATION) repository: getDeliveryEndPointList: put http://localhost
  2009.10.26 to 05:05:59:726: B2BStarter wire: B2B - (INFORMATION) repository: getDeliveryEndPointList: dir no. Archive
  2009.10.26 to 05:05:59:727: B2BStarter wire: B2B - (INFORMATION) repository: getDeliveryEndPointList: no marker given
  2009.10.26 to 05:05:59:734: B2BStarter wire: B2B - (INFORMATION) repository: getDeliveryEndPointList: put file://localhost//apps/elshas4/aelshas4/workingfolder/supplierConnectivity/EmersonB2BHost
  2009.10.26 to 05:05:59:740: B2BStarter wire: B2B - oracle.tip.adapter.b2b.transport.TransportInterface:initialize (INFORMATION): Accessories: file://localhost//apps/elshas4/aelshas4/workingfolder/supplierConnectivity/EmersonB2BHost file.receiver.minimum_age = 0
  transport_callout_waittime = 30
  PROTOCOL_ENDPOINT = null
  filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
  polling_interval = 60
  leader. Receiver.polling_interval = 60
  
  2009.10.26 to 05:05:59:748: B2BStarter wire: B2B - oracle.tip.adapter.b2b.transport.TransportInterface:initialize (INFORMATION): Accessories: http://localhost port = 12001
  PROTOCOL_ENDPOINT = null
  
  2009.10.26 to 05:05:59:942: B2BStarter wire: B2B - initialize (DEBUG) TransportReceiver: [Emerson_Stage_Generic_TransportServer < file > < Emerson >]
  2009.10.26 to 05:05:59:995: B2BStarter wire: B2B - initialize (DEBUG) TransportReceiver: [Emerson_Stage_AS2_TransportServer < https > < Emerson >]
  2009.10.26 to 05:06:00:088: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize initialize AppTransport Logger.
  2009.10.26 to 05:06:00:090: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
  2009.10.26 to 05:06:00:285: B2BStarter wire: B2B - (INFORMATION) repository: getInternalDeliveryEndPointList: dir no. Archive
  2009.10.26 to 05:06:00:286: B2BStarter wire: B2B - (INFORMATION) repository: getInternalDeliveryEndPointList: marker: false
  2009.10.26 to 05:06:00:292: B2BStarter wire: B2B - (INFORMATION) repository: getInternalDeliveryEndPointList: put file://localhost//apps/elshas4/aelshas4/workingfolder/supplierConnectivity/emersonInternalinput
  2009.10.26 to 05:06:00:293: B2BStarter wire: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize loop end point main file://localhost//apps/elshas4/aelshas4/workingfolder/supplierConnectivity/emersonInternalinput
  2009.10.26 to 05:06:00:303: B2BStarter wire: B2B - oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize (DEBUG) browsing transport Endpoint: file://localhost//apps/elshas4/aelshas4/workingfolder/supplierConnectivity/emersonInternalinput
  2009.10.26 to 05:06:00:305: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize add file transport Endpoint: file://localhost//apps/elshas4/aelshas4/workingfolder/supplierConnectivity/emersonInternalinput {file.receiver.preserve_filename = false, marker = false, transport_callout_waittime = 30, file.receiver.polling_interval = 60, polling_interval = 60, file.receiver.marker = false, preserve_filename = false, file.receiver.minimum_age = 0}
  2009.10.26 to 05:06:00:319: B2BStarter wire: B2B - initialize (DEBUG) TransportReceiver: [Emerson_File_TransportServer < file > < Emerson >]
  2009.10.26 to 05:06:00:320: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:startListen entry
  2009.10.26 to 05:06:00:321: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:startListen output
  2009.10.26 to 05:06:00:322: Thread-10: B2B - oracle.tip.adapter.b2b.data.MsgListener:run (DEBUG) Thread is started
  2009.10.26 to 05:06:00:323: B2BStarter wire: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:initialize output
  2009.10.26 to 05:06:00:323: B2BStarter wire: B2B - (DEBUGGING) B2BStarter - initialized B2B
  2009.10.26 to 05:06:02:364: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
  2009.10.26 to 05:06:02:867: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen lit, will listen on IP_OUT_QUEUE for messages
  2009.10.26 to 05:06:02:948: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:run start to listen to the message
  2009.10.26 to 05:08:30:052: Thread-11: B2B - (DEBUG)
  Protocol = file
  Version = 1.0
  Transport header
  filename:Fastenal_810_5020_1_25.txt
  FileSize:830
  filename_format:%FROM_PARTY%_%timestamp%.dat
  file_ext:txt
  FullPath:/apps/elshas4/aelshas4/WorkingFolder/supplierConnectivity/EmersonB2BHost/Fastenal_810_5020_1_25.txt
  timestamp:2009 - 10-26 T 05: 08:26.000 - 06:00
  
  2009.10.26 to 05:08:30:333: Thread-11: B2B - beginTransaction (DEBUG) DBContext: enter
  2009.10.26 to 05:08:30:338: Thread-11: B2B - beginTransaction (DEBUG) DBContext: Transaction.begin)
  2009.10.26 to 05:08:30:339: Thread-11: B2B - beginTransaction (DEBUG) DBContext: leave
  2009.10.26 to 05:08:30:340: Thread-11: B2B - (DEBUGGING) InterfaceListener:onMessage - incoming call legend - null - null
  2009.10.26 to 05:08:30:341: Thread-11: B2B - names of headers (DEBUG) InterfaceListenersyncAckEBMSchecking
  2009.10.26 to 05:08:30:411: Thread-11: B2B - Enter oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2_params) (DEBUG)
  2009.10.26 to 05:08:30:733: Thread-11: B2B - output oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2_params) (DEBUG)
  2009.10.26 to 05:08:30:738: Thread-11: B2B - sendEventtrue oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage (DEBUG)
  2009.10.26 to 05:08:30:773: Thread-11: B2B - validation DBContext (DEBUG): enter
  2009.10.26 to 05:08:30:778: Thread-11: B2B - validation DBContext (DEBUG): Transaction.commit)
  2009.10.26 to 05:08:30:778: Thread-11: B2B - (DEBUGGING) DBContext commit: leave
  2009.10.26 to 05:08:31:595: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.data.MsgListener:onMessage entry
  2009.10.26 to 05:08:31:596: Thread-10: B2B - beginTransaction (DEBUG) DBContext: enter
  2009.10.26 to 05:08:31:596: Thread-10: B2B - beginTransaction (DEBUG) DBContext: Transaction.begin)
  2009.10.26 to 05:08:31:597: Thread-10: B2B - beginTransaction (DEBUG) DBContext: leave
  2009.10.26 to 05:08:31:599: Thread-10: B2B - input (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents
  2009.10.26 to 05:08:31:599: Thread-10: B2B - oracle.tip.adapter.b2b.engine.Engine:processEvents (DEBUG) begin transaction
  2009.10.26 to 05:08:31:600: Thread-10: B2B - beginTransaction (DEBUG) DBContext: enter
  2009.10.26 to 05:08:31:601: Thread-10: B2B - beginTransaction (DEBUG) DBContext: leave
  2009.10.26 to 05:08:31:601: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent entry
  2009.10.26 to 05:08:31:602: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess entry
  2009.10.26 to 05:08:31:603: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage entry
  2009.10.26 to 05:08:31:639: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage output
  2009.10.26 to 05:08:31:639: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage entry
  2009.10.26 to 05:08:31:654: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage output
  2009.10.26 to 05:08:31:655: Thread-10: B2B - input (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage
  2009.10.26 to 05:08:31:753: Thread-10: B2B - oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage (DEBUG) Identify Business Protocol
  2009.10.26 to 05:08:31:754: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange entry
  2009.10.26 to 05:08:31:755: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange output
  2009.10.26 to 05:08:31:756: Thread-10: B2B - oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage (DEBUG) unpack using the specific package class of BP
  2009.10.26 to 05:08:31:758: Thread-10: B2B - MimePackaging (DEBUG): out of the box: enter
  2009.10.26 to 05:08:31:763: Thread-10: B2B - MimePackaging:doUnpack (DEBUG): enter
  2009.10.26 to 05:08:31:772: Thread-10: B2B - MimePackaging:unpackNonMimeMessage (DEBUG): enter
  2009.10.26 to 05:08:31:774: Thread-10: B2B - MimePackaging:unpackNonMimeMessage (DEBUG): encoding = UTF-8
  2009.10.26 to 05:08:31:778: Thread-10: B2B - MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@13d1402 (DEBUG)
  2009.10.26 to 05:08:31:779: Thread-10: B2B - MimePackaging:unpackNonMimeMessage:Exit (DEBUG)
  2009.10.26 to 05:08:31:780: Thread-10: B2B - MimePackaging (DEBUG): out of the box: output
  2009.10.26 to 05:08:31:780: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage decode the Message entering the B2B Message
  2009.10.26 to 05:08:31:781: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage enter
  2009.10.26 to 05:08:31:782: Thread-10: B2B - oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage (DEBUGGING) of the components number = 1
  2009.10.26 to 05:08:31:807: Thread-10: B2B - oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage (DEBUG) Protocol of Transport = {file}
  2009.10.26 to 05:08:31:812: Thread-10: B2B - filename oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage (DEBUG) = Fastenal_810_5020_1_25.txt
  2009.10.26 to 05:08:31:836: Thread-10: B2B - oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage (DEBUG) FILE_FORMAT = FROM_PARTY - Fastenal
  2009.10.26 to 05:08:31:836: Thread-10: B2B - oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage (DEBUG) FILE_FORMAT = TIMESTAMP - 810
  2009.10.26 to 05:08:31:837: Thread-10: file host TP (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage B2B - name = Fastenal
  2009.10.26 to 05:08:31:838: Thread-10: B2B - setInitiatingPartyId() calling (DEBUG), changing from null to TPName: Fastenal Type: null value, value: null
  2009.10.26 to 05:08:31:839: Thread-10: B2B - (DEBUGGING) = Fastenal oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty
  2009.10.26 to 05:08:31:839: Thread-10: B2B - setFromPartyId() calling (DEBUG), changing from null to TPName: Fastenal Type: null value, value: null
  2009.10.26 to 05:08:31:840: Thread-10: B2B - setToPartyId() calling (DEBUG), changing to TPName null: null Type: null value, value: null
  2009.10.26 to 05:08:31:841: Thread-10: B2B - oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage (DEBUG) NULL security information
  2009.10.26 to 05:08:31:848: Thread-10: B2B - output oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage (DEBUG)
  2009.10.26 to 05:08:31:848: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:processHubMessage entry
  2009.10.26 to 05:08:31:849: Thread-10: B2B - toTP oracle.tip.adapter.b2b.engine.Engine:processHubMessage (DEBUG) null
  2009.10.26 to 05:08:31:850: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
  2009.10.26 to 05:08:31:850: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:processHubMessage output
  2009.10.26 to 05:08:31:851: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
  2009.10.26 to 05:08:31:852: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
  2009.10.26 to 05:08:31:852: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate entry
  2009.10.26 to 05:08:31:853: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check post non - RosettaNet
  2009.10.26 to 05:08:31:873: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate output
  2009.10.26 to 05:08:31:874: Thread-10: B2B - oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage (DEBUG) Protocol of Collaboration Id: null
  2009.10.26 to 05:08:31:875: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument entry
  2009.10.26 to 05:08:34:536: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl entry
  2009.10.26 to 05:08:34:544: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
  2009.10.26 to 05:08:34:544: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl (DEBUG) leave
  2009.10.26 to 05:08:34:546: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector entry
  2009.10.26 to 05:08:34:546: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@fa5ff3
  2009.10.26 to 05:09:02:955: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue (DEBUG) Param Name = SeverityConfig
  2009.10.26 to 05:09:02:956: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue (DEBUG) Value = null
  2009.10.26 to 05:09:02:998: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) ISA Key = InterchangeSenderID Val = 042653634 G
  2009.10.26 to 05:09:02:998: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) ISA Key = InterchangeSenderQual Val = 01
  2009.10.26 to 05:09:02:999: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) = X 12 standard
  2009.10.26 to 05:09:02:999: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) ISA Key = InterchangeReceiverID Val = EMR
  2009.10.26 to 05:09:03:000: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) ISA Key = InterchangeControlVersion Val = 00502
  2009.10.26 to 05:09:03:001: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) ISA Key = InterchangeReceiverQual Val = ZZ
  2009.10.26 to 05:09:03:002: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode key = GroupSenderID Val = 042653634 S Group
  2009.10.26 to 05:09:03:002: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X 12 revision of Doc: 005020
  2009.10.26 to 05:09:03:003: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X 12 Doc review: 5020
  2009.10.26 to 05:09:03:004: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) group key = GroupReceiverID Val = LIEBERTNA
  2009.10.26 to 05:09:03:004: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) operation Count = 1
  2009.10.26 to 05:09:03:005: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode (DEBUG) DocType = 810
  2009.10.26 to 05:09:03:006: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters parameter InterchangeReceiverQual = ZZ
  2009.10.26 to 05:09:03:007: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters parameter InterchangeSenderID = 042653634 G
  2009.10.26 to 05:09:03:007: Thread-10: B2B - oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters (DEBUG) parameter InterchangeReceiverID = EMR
  2009.10.26 to 05:09:03:008: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters parameter GroupReceiverID = LIEBERTNA
  2009.10.26 to 05:09:03:008: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters parameter InterchangeControlVersion = 00502
  2009.10.26 to 05:09:03:009: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters parameter GroupSenderID = 042653634 S
  2009.10.26 to 05:09:03:009: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters parameter InterchangeSenderQual = 01
  2009.10.26 to 05:09:03:010: Thread-10: B2B - output oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument (DEBUG)
  2009.10.26 to 05:09:03:011: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate entry
  2009.10.26 to 05:09:03:012: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate msginfo reftomsgid is null, nothing to correlate
  2009.10.26 to 05:09:03:012: Thread-10: B2B - (DEBUGGING) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate output
  2009.10.26 to 05:09:03:013: Thread-10: B2B - number oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage (DEBUGGING) of b2b messages 1
  2009.10.26 to 05:09:03:014: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage msgtype = 1
  2009.10.26 to 05:09:03:015: Thread-10: B2B - (DEBUGGING):processIncomingTPA() oracle.tip.adapter.b2b.tpa.TPAProcessor start TPA treatment...
  2009.10.26 to 05:09:03:016: Thread-10: B2B - (DEBUGGING):processTPA() oracle.tip.adapter.b2b.tpa.TPAProcessor PARTIES (before calling processParty):
  initial: null
  from: TPName: Fastenal Type: null value, value: null
  to: TPName: null Type: null value, value: null
  final: null
  opening: TPName: Fastenal Type: null value, value: null
  2009.10.26 to 05:09:03:016: Thread-10: B2B - direction oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG) has arrived
  2009.10.26 to 05:09:03:017: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() call processparty with: TPName: null Type: null value, value: null
  2009.10.26 to 05:09:03:017: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() (DEBUG) Begin...
  2009.10.26 to 05:09:03:028: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG) after the call to processparty: TPName: Type of Emerson: null value, value: null
  2009.10.26 to 05:09:03:028: Thread-10: B2B - (DEBUGGING):processTPA() oracle.tip.adapter.b2b.tpa.TPAProcessor PARTIES (after the call to processParty):
  initial: null
  from: TPName: Fastenal Type: null value, value: null
  to: TPName: Type of Emerson: null value, value: null
  final: null
  opening: TPName: Fastenal Type: null value, value: null
  2009.10.26 to 05:09:03:034: Thread-10: B2B - docTypeName oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG): 810 docTypeRevision: 5020
  2009.10.26 to 05:09:03:056: Thread-10: B2B - actionName oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG): Proces_X12_5020_810 actionRevision: 1.0
  2009.10.26 to 05:09:03:057: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() (DEBUG) Begin... Name of activity: Proces_X12_5020_810 activity Version: 1.0
  2009.10.26 to 05:09:03:059: Thread-10: B2B - (DEBUGGING) btu.ID RepoDataAccessor:constructCollabSQL() SELECT, btu. CLASSTYPE OF TIP_BusinessTransactionUsag_ra btu, TIP_BusinessTransaction_ra bt TIP_RequestingAction_ra reqBa, ba TIP_BusinessAction_ra WHERE btu.businesstransaction = bt.ID AND bt.ID = reqBa.businesstransaction AND reqBa.businessaction = ba.ID AND ba.name =? AND ba.revision =? UNION SELECT btu.ID, btu. CLASSTYPE OF TIP_BusinessTransactionUsag_ra btu, TIP_BusinessTransaction_ra bt TIP_RespondingAction_ra respBa, ba TIP_BusinessAction_ra WHERE btu.businesstransaction = bt.ID AND bt.ID = respBa.businesstransaction AND respBa.businessaction = ba.ID AND ba.name =? AND ba.revision =?
  2009.10.26 to 05:09:03:066: Thread-10: B2B - eventName oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG): < Proces_X12_5020_810 >
  2009.10.26 to 05:09:03:067: Thread-10: B2B - messageType:1 oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG)
  2009.10.26 to 05:09:03:191: Thread-10: B2B - setMode() calling (DEBUG), changing from-1 to 2
  2009.10.26 to 05:09:03:191: Thread-10: B2B - setInitiatingPartyId() calling (DEBUG), changing the TPName: Fastenal Type: null value, value: null for TPName: Fastenal Type: null value, value: null
  2009.10.26 to 05:09:03:192: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID = null
  2009.10.26 to 05:09:03:193: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG) name of TPA: null
  2009.10.26 to 05:09:03:193: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG) name of TPA: null
  2009.10.26 to 05:09:03:194: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() (DEBUG) Begin...
  2009.10.26 to 05:09:03:195: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() (DEBUG)
  Party-> null-null null-Fastenal To Party-> null-null null-Emerson Business Action name-> Proces_X12_5020_810
  2009.10.26 to 05:09:03:196: Thread-10: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() start...
  2009.10.26 to 05:09:03:196: Thread-10: B2B - fromParty RepoDataAccessor:getAgreementNameByBaTPName() (DEBUG): TPName: Fastenal Type: null value, value: null toParty: TPName: Emerson Type: null value, value: null initiatingParty: TPName: Fastenal Type: null value, value: null
  2009.10.26 to 05:09:03:199: Thread-10: B2B - (DEBUGGING) ag.name RepoDataAccessor:getAgreementNameByBaTPName() SELECT ba1 TIP_BusinessAction_ra TIP_Party_ra tp1, ba2 TIP_BusinessAction_ra, tp2 TIP_Party_ra, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag tp1.name WHERE TIP_Participant_ra =? AND ba1.name =? AND ba1.revision =? AND sba1.isinitiator =? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name =? AND ba2.name =? AND ba2.revision =? AND sba2.isinitiator =? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate < = SYSDATE), OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate + 1 > = SYSDATE) OR (ag.effectivetodate IS NULL))
  2009.10.26 to 05:09:03:200: Thread-10: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() bind vars: Fastenal, Proces_X12_5020_810, 1.0, Y, Emerson, Proces_X12_5020_810, 1.0, N
  2009.10.26 to 05:09:15:476: Thread-10: B2B - end RepoDataAccessor:getAgreementNameByBaTPName() (DEBUGGING)...
  2009.10.26 to 05:09:15:476: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() (DEBUG) name of the agreement: Emerson_Fastenal_Stage_Generic_Agreement
  2009.10.26 to 05:09:15:477: Thread-10: B2B - (DEBUGGING):identifyTPA() end oracle.tip.adapter.b2b.tpa.TPAIdentifier
  2009.10.26 to 05:09:15:477: Thread-10: B2B - oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() (DEBUG) name 2 TPA: Emerson_Fastenal_Stage_Generic_Agreement
  2009.10.26 to 05:09:15:478: Thread-10: B2B - () oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA (DEBUG)

  Hello
  Data will not fall to IP_IN_QUEUE. IP_IN_QUEUE is a default queue for B2B

  Kind regards
  Nitesh

• is a necessary to connect to the database Cache IS transparent gateway?

  Hello
  
  I was invited by one of our developers how to create a connection of its Oracle 11.2 to SQL Server and also InterSystems Cache database ' databases without having to use the transparent gateway?
  
  Is it possible, and if so, how can it be done?
  
  (Thanks in advance)

  Hello
  You say - "I guess that means that the Oracle database gateway is FREE (SE)" but to make the point again - the gateway of database for ODBC (DG4ODBC) is free. The other gateways require a license.
  If you are running on Windows, then most of the Microsoft's ODBC drivers are free or included as part of other products, so you don't need to pay for them, and many providers of database non-Oracle also include a pilot ODCB as part of the product, once again there is no need to pay for anything else to use DG4ODBC for example MySQL.

  To interface with a Database Cache, you can use Dg4ODBC but you must provide the ODBC driver. There is not a "dedicated" for this product database gateway. That's why we provide the DG4ODBC which can interface with a non-Oracle or data store database for which an ODBC driver is available.
  This available on My Oracle Support note contains information on the installation on different plates-formes-notes

  Note to master note.1083703.1 for the Oracle Gateway products

  Kind regards
  Mike

• I have the pro first, but video effects, popup; I don't have four, eight and sixteen points cache transparency. How can I get these?

  Please, I need help

  Why did cache left in 2015 CC?