Trash displayed always as complete.

Similar Questions

• Windows Media Center displays always removable drives

  Hello.  I have been in charge of research and the research but can't find any information on that.  I have Vista and you use Media Center mainly for videos on the TV display.  I set up the folders to monitor and computer-limited to only public folders and another folder elsewhere.

  My problem is that when I plug in an external USB drive, Media Center gives the user full access to all of its content.  Everything!  I never want this, at least not for some readers.  Is there a way that this can be avoided?

  In addition, Media Center displays always the C: drive.  It does not show all of the content, only some system files, but it's still annoying.

  I find it very disappointing that Media Center is to give the user access to the folders that I didn't authorize.  I need complete and total control on it.

  For any help or suggestions would be welcome!

  Hi Jeff

  Media Center will show all files located on the external drive when you go to the configuration section which folders are "monitored", however, when you go to music or images, for example in Media Center, it must 'only' showing the folders in which you marked to be looked at.  You declare that is to show all records in the field of music and pictures of media center?

  Thanks for continuing to post on Microsoft Answers. Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Despite the removal of everything on my iPhone, it displays always remember. What should I do to fix this problem?

  Despite the removal of everything on my iPhone, it displays always remember. I deleted all the photos. No photo stream. removed from the recently deleted as well. Have also removed all the songs and most of the applications. But the problem persists. What should I do to fix this problem?

  You happen to have Whatsapp on your device? If so, its last update caused several questions on the iPhones of the peoples. Delete the app and reset the phone in now the home and sleep/wake set buttons until you see the Apple journal and then release. Make sure you check in your conversations. Do not install Whatsapp again until they release a fix.

• Subscribe plan 1 year already, but all applications display always download trial.

  Subscribe plan 1 year already, but all applications display always download trial.

  -purchased successful

  -disconnected & signed several times

  How to solve this problem?

  Thank you

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• IMAQ image display turn off completely in executable mode

  Hi all

  I created an executable file with a display imaq and ran on several PC. In all cases except one, I can manipulate the scroll bars, and other properties without any problem. Run the executable is not running on a specific PC. I can't change the display properties. This include the scroll bars and tool KING. It does not resemble the imaq display is completely locked.

  I even generate the executable file in the same PC. It still does not work. The normal VI (non-executable) operate OK in this machine.

  On another PC with exactly the same motherboad and video tips works fine.

  Thanks in advance if anyone can provide suggestions.

  JK4

  Hello jk4.

  Just to clarify, the VI would go well on this particular PC. The executable seems to work as well, but you can't manipulate the properties of a view? Is that IMAQ display or the regular waveform view? You can create a simple VI (executable) access the node display IMAQ property?

• How can I copy a document when the printer display always flashes missing cartridge message?

  HP D110 has x, os XP: is it possible to replace the touch screen to copy a document when a cartridge is missing and the display will show only this error message?  The black cartridge is there and I can still print.

  Hi mrmarquar,

  There is no option to print or copy without cartridge into the two slots in the cartridge. The printer needs a cartridge into the two slots, even if the Habs ink is low, it should always copy in black and white.

• popup image displayed always right for the first time

              <af:popup id="opopp" contentDelivery="lazyUncached">
                      <af:panelWindow id="pl">
                          <af:image rendered="true"
                                    id="im"
                                  source="/faces/portalapp/test.jpg"/>
                      </af:panelWindow>
              </af:popup>
  
  
            <af:panelGroupLayout >
              <af:showPopupBehavior popupId="opopp" triggerType="click"/>
              <af:image id="dc_i4" rendered="true" 
                        source="/faces/portalapp/test.jpg"/>
            </af:panelGroupLayout>
  

  I have a popup that displays on a click of the image.  For the first time (when the page is reloaded) popup of image is always copied on the side right and after that if the popup is closed and open, it is displayed in the Center.

  I use jdev 11.1.1.7.0

  Hello

  Try to use Align and AlignId in showPopupBehavior as:

  Where alignId is the id of the component that you want the popup must be aligned when it is open.

• How do you know that a display object has completed the update of itself

  Hello

  I wonder if there is some event that I had to listen to know that an object has finished the update.

  Once I update a display with some data object, I need to know when it's done everything, including the resizing and initializing... etc.

  I just did a "callLater", but for complex objects, "callLater" does not... using "setTimeout" for 1 second works for these objects complicated... but its my request as much as 1 second slowdown is so slow. In addition, with a timeout is always No... as I have is not a control on objects that could be passed to this class... and maybe in the future there will be a very complex subject that needs more than 1 second to be ready.

  So in short, is it a guaranteed way to know if an object has finished to update itself, so that I can take the next step while being sure about?

  Thank you

  You should be able to use the updateComplete event.

• Thunderbird displays always the message in the form 01 month (January); computer has the correct date.

  Messages in Thunderbird - if sent, received, be it - always present "01" for the month. The day and year are correct, however. The operating system contains the correct date. How can I synchronize Thunderbird on my computer?

  Fix you your computer. I have no idea how drive a mac, but;

  • Check the regional settings are correct. It is certainly not the case.
  • Once you have the correct locale check the time zone
  • Check that the date format is correct. I'm guessing that large systems short date format where the 01 for the month.

• Firefox only displays not the complete its preferences window; Why the low option is partially hidden

  Row of the bottom of the Preferences tab windows displays only partially. Well... it's weird... when I opened the preferences window, (to describe correctly the question) and switches between the last row of buttons (tabs, content, etc.), all of the options and then displayed. I wish I had done a screen shot earlier. Actually, it happened... honest!

  You can resize the window by dragging the borders?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Mini Display Port has completely stopped working

  So I bought a Mini Display Port to HDMI adapter and it has worked perfectly well for more than a month. That's until 3 days ago. Out of nowhere I plugged my HDMI into the adapter and the power led of the monitor turned on and after a few seconds of reading, "No Signal". I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%. I looked online and tried every single tip or solution I've seen without success. All my HDMI cords are fully functional as I tried each one with my PS4 and works perfectly, so this isn't the issue. I've never had problems like this with any other Apple computer. Probably because no other computer using mini display ONLY ports. If anyone has had this problem and found a solution please let me know, if I can try to get this working. I have a MacBook Pro 15 in. mid-2012 with the processor i7 under OS X 10.8.5

  blmller2 wrote:

  I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%.

  This suggests a possible problem with the cord.  I would like to make an appointment with an Apple store genius bar and I tested the unit and the power cord.

  Ciao.

• NB100 - brightness of the display always return to brightest on restart

  Whenever I restart the computer the brightness of the display is reset to zero up. All the laptops I've ever used will remember the brightness of the screen I had before I shutdown or restart.

  It's embarrassing all simply because I do not use the maximum brightness.

  How can I do to make the NB100 remembers the brightness to reboot? I have Windows XP and standard installation.

  Start your laptop every time with the same profile of power?

• Display driver cannot complete installation on Qosmio G30-137

  I just bought qosmio g30-137 of the Germany. My laptop had a German version of windows and I installed winXP PRO Greek edition. I have a problem with the graphics card driver. I downloaded from the TOSHIBA site. While I do Setup search the driver files that does not exist and I can't complete installation. I would like to know if anyone knows where I can find a driver to complete the procedure or if anyone knows what the problem is and how I resolve?
  Also starting from TOSHIBA site some installation instructions that explain how to do the installation with the appropriate sequence. Also, I would like to know where I can find the chipset driver?

  Hello

  Have you installed the Windows from the original CD of Microsoft?
  Why you suggest that the graphics driver has a malfunction?

  I guess you can not complete the original installation of the Win operating system due to the RAID driver and graphics driver. This unit has been delivered with RAID function and you need to install the RAID driver at the beginning of the installation of the OS.

  In addition there is also an instruction and installation utility chipset on the Toshiba driver page.

• THE DISPLAY ALWAYS SHOWS REQUEST UNAUTHORIZED WHEN I GOAMAKE THAT LOGGED IN I CAN; T DOWNLOAD PAGES AND IT SAYS I HAVE HELP

  THE DISPLAY SHOWS REQUEST UNAUTHORIZED MAKE SURE THAT YOU HAVE LOGGED. I DOWNLOADED THE APPY AND IT SAYS I HAVE BUT I GET THIS HELP

  Using all CAPS in a forum online is screaming rude and thoughtful.

  Turn off your CAPS LOCK, SHIFT, or your keyboard does not work as well?