Trashed photoshop CS6 on the staff recommendation. Now impossible to reinstall because I have the upgrade disc. I have a drive CS5 and CS6. Should I install CS5 and CS6?

Similar Questions

• Mac OsX 10.7.5 - uninstalled - now impossible to reinstall because of operating system

  Help!

  My scanner was saying were constantly "scan errors" and he asked me to reopen the windows... and if I don't it would break. Over and over again.

  I thought I would uninstall and reinstall (it fixed it before)... big mistake. The CD supplied with the printer says that it cannot install because it is made for v10.5 and v10.6.

  What the devil do? I need my printer!

  Thank you!

  I'm sorry that you are experiencing this issue. What kind of printer you have? I can check for you.

  Here is a link on the Web site that has drivers, that you can check.

  http://WWW8.HP.com/us/en/support-drivers.html

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• If I buy photoshop, how many computers can I download it on like because I have two computers that I work on.

  If I buy photoshop, how many computers can I download it on like because I have two computers that I work on.

  Hi dylanl,.

  You can download the license on the system at the same time, however you can use a system according to the end-user license agreement.

  Kind regards

  Mohit

• I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? because I have received no series by mail, but it works well!

  I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? Because I have received no series by mail, but it works well! And he never asks me to activate with a serial number. I just pay monthly Plan.

  I ask this question because I have to change the computer and I didn't have trouble disattivate App and put it on the new pc!

  Can I turn off just from the creative cloud by disconnection of the account application, uninstall the application and then install on the new pc?

  The CC has not need any number of series, it is based on an Adobe ID.

  In the case where you are prompted for the serial number then you can refer to.

  • Creative Cloud applications ask for serial number
  • Re: Incorrect serial number?

  Concerning

  Baudier

• I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook Windows xp sp3 home.

  I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.

  I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standby
  I am running windows xp home sp3. What should I do?

  Hi samp2000,

  Follow the steps in this article to resolve the problem:

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

• Want to downgrade from Windows 7 to XP using the upgrade disc

  I installed windows 7 on my laptop. Many problems. Tried to re - install Windows xp with a upgrade version, but will not recognize windows 7 upgrade to xp. How to re-install xp with a upgrade disk.

  * original title - replaced with win7 winxp. have xp updated but will not be installed with win7. How to make xp back on computer

  Hi Allen,.

  You will not be able to install XP on Win 7 using the upgrade disc. You will require your original operating system disk and you will have to boot from the OS installation disc, once installed you can use the disk to upgrade XP on this operating system. Another way is out to install your system disk and the boot of Winxp.

  I hope this helps.

• Impossible to upgrade to windows vista ultimate from vista home Basic using the upgrade disc

  I bought a disc "to upgrade use only" Windows Vista Ultimate at my University and tried to upgrade my current version of Windows (Vista Home Basic).

  At the stage where I had to select the 'Upgrade' or 'Custom' installation option, I noticed that the interface was telling me, 'Upgrade Disabled"with a message that has been along the line"this version of windows is already installed and cannot be upgraded."
  I know that the upgrade disc was probably intended for the upgrade from an earlier version of Windows like XP, but I assumed that because Microsoft also sells discs "Anytime Upgrade" to do exactly what I'm trying to accomplish this I would have had no problem.
  For any help or suggestion that contact would be greatly appreciated.
  Thank you in advance.

  It's all about Service Pack.
  We don't know what you have.

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.
  You will need to swap the disk to upgrade to a later version that includes the missing Service Pack.

  In this case, your upgrade disk has NO Service Pack installed with it.

  Take it back to the University, if you cannot uninstall SP1 operating system.

  See you soon... Mick Murphy - Microsoft partner

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Hello I get in touch with you because I have passed a Bill, and gave me the bottom three months ago and I want my money thanks

  Hello I get in touch with you because I have passed a Bill, and gave me the bottom three months ago and I want my money thanks

  Hello Monica,.

  Please contact support by calling/chat for claims.

  Contact the customer service

  Kind regards

  Sheena

• Windows 10 killed all of the Adobe Suite. Now impossible to reinstall.

  I did the upgrade of Windows 10 and immediately lost all of the Adobe Suite.
  Photoshop takes over 3 minutes to not even open, then ran like a slug on fully specced by top of the line of Surface Pro 3.
  Premiere Pro does not open.

  I uninstalled them all that intend to reinstall, now cloud creative Installer install, so I am dead in the water until the problem is corrected.
  The installer returns an error 201, which is a kind of connection problem, but I have no problem with any other part of the internet, or my network, only the installer think that there is some kind of problem.

  I need it all back up and running and the need now, or I will cancel my subscription and buy an old version of disc shaped can I reinstall without this kind of waste to have to cross.

  I would greatly any suggestions as to how to install the Setup program in order to recover the suite on my computer and get back to work before you go broke.

  Hi Ezookiel

  You can try to connect to a different network and see if you face the same question.

  or

  Try the steps mentioned under heading "Connectivity issues to solve the problems" of the Doc following KB: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Kind regards

  Rahul

• New upgrade of Windows 7 using the upgrade disc

  Hello

  I have some annoying problems which suggests that I should reinstall W7.

  History:-Toshiba laptop purchased with Vista Home Premium includes a recovery disk. Upgrade to W7 Home Premium 32 bit (now in SP1) from a purchased upgrade disk. Everything is OK and all files etc works OK after using the easy transfer. Now, after 3 1/2 years in this State, the problems (which include backup, IE, blue screen, heavy CPU usage) worsen.

  So: - can I re - pass using the same upgrade disc in order not to destroy my files and settings, drivers, etc?

  I am aware that I could do a clean install using upgrade disk (that's the only option I found answers to the community) but things are not so bad as I want the agro to do at this point. My concern is that Qualification record cannot accept the same existing software with the same product key valid.

  All advice would be welcome.

  Thank you, David.

  Hello David,.

  Thank you for your response.

  When you repair Windows 7 or upgrade site, your programs will remain installed. Not to cause suffering.

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  Thank you

• The upgrade of our guests 5.0 ESXi and vCenter Server 5 and 5.5 Enterprise Plus

  We are the 4 upgrade hosts of ESXi 5 to 5.5

  We add 4 more guests with own ESXi 5.5 installed

  We are also upgrading our vCS 5 in the vCSA 5.5

  Using Enterprise + licenses

  Question: I'm trying to understand the best way to achieve this transition.  4 guests run about 100 virtual machines and 4 guests we add are clean slates.

  That's what I think... Please help me guys

  1. once the 4 new hosts are installed in the Datacenter clean running ESXi 5.5 I will deploy the vCSA ovf and register 4 guests with the Linux-based device.

  2. now, I have 4 new 5.5 ESXi hosts registered and running with vCSA 5.5 but I still have my old 4 guests with ESXi 5 and registered to the old vCS about 100 virtual machines running WIndows

  3. at this point I think stop on my older hosts 4 virtual machines and remove them from the vCenter Server inventory Windows and everything just their registration with the new vCSA

  4. Will be all my virtual machines or transferred with the hosts if I close them and put the hosts in maintenance mode?

  5. now, I should have all 8 guests registered with my new vCSA.  But the original 4 hosts have yet to be upgraded to ESXi 5.5

  6 move 100 virtual machines to the new 4 hosts running ESXi 5.5 and upgraded the 4 former hosts.

  7. now, I should have 8 guests with ESXi 5.5 using the vCSA

  See you soon!

  Pretty much.

  To make things easier, you can deploy the EGGS for vCSA in your current vCenter (if I remember correctly import an OVA using vCenter allows you to set certain options that should be set to the vCSA shell). After making sure that the vCSA online & configured, you can then install ESXi on all your new hosts, add them to a cluster in the vCSA and put a few trials of virtual machines on there to confirm the network setting is configured correctly. Once it's done (and assuming that the old and the new hosts use the same shared storage) you can stop the vCSA, remove it stock Windows vCS, please write it on one of your new hosts and turn on. You have now two environments (5.0 and 5.5). Next if you disconnect a host from 5.0 vCS (with virtual machines running on it), you can then connect it to the vCSA 5.5. Assuming that the vSwitchs standard networking of the exchanges that are the same name in both environments, you now can vMotion VMs between host 5.0 and 5.5 cluster. At this time, you can repeat with all remaining hosts until everything has been made the transition without service interruption. This will leave a lot of old objects in your old 5.0 vCS, but if that is getting trashed it isn't a big deal.

• The upgrade on Pavilion 9667ea hard drive to SSD

  I think the upgrade my computer laptop 9667ea Pavilion by replacing the first hard drive of 160 GB with an SSD, as the Cruicial M500 240 GB SATA 111, or similar.

  Could you tell me if there are problems in doing this, because I see no other posted messages it may be according to the model of your laptop?

  I advanced and bought the SSD (Samsung 840 EVO 250 GB), which has been installed on the HP Pavilion dv9667ea. Everything went well and I used the Samsung software cloning with the SSD drive (I backed up the C drive beforehand). I have power and data cables, so I need just the package base. The new 250 GB SSD drive replaces the original 160 GB hard drive, I decided to take out the other drive so hard 160 GB. The laptop is much faster at startup and is also faster by using the programs on the laptop. As there are now no hard drives on the laptop, there is now virtually no fan noise, which was inconvenient.

  Thank you for your advice.

• The upgrade of Inspiron 9300 Hard Drive not recognized

  I bought an upgrade of my Inspiron 9300 laptop hard drive:

  Old hard drive: TG754 Hard Drive, 60G, 9.5 MM, 7.2 K Hitachi, Moraga, unleaded

  New hard drive: 250 GB SATA 3 Gb s hard drive 16 MB 7200 RPM 2.5 IN. w o free fall Scorpio black

  TG754

  Hard drive, 60G, 9.5 MM, Hitachi 7.2 K, Moraga, unleaded

  I don't know I installed it correct (just slide in and screw it) but my problem is that my laptop does not recognize the new drive.  When starting it complains that no hard drive is, and when I boot my Windows XP it also said that no hard drive is located.

  I followed the upgrade recommended Dell so I do not know why it does not work.  I read that the SATA drives require additional drivers, but I'm sure that my old drive was already a SATA drive, so I don't understand why he is not recognized.

  Help, please.  Thank you.

  The 9300 has been performed in two versions - the vast majority were EIDE.  The last execution of production used SATA.  Yours is EIDE.

  Readers are physically the same size and made the same carrier - but does not connect the SATA version to the motherboard (check the back both discs and you'll see why).

  The EIDE version has a limit of 120G BIOS - it means not that you can not use this drive of 160 G, but the results can be unpredictable, sudden loss of all data.  Keep backups if you try a 160 - it is much safer to use a 120G.

  No, a 5400 all else equal will be slower than a 7200 - but you don't have a choice, because all manufacturers have stopped making 7200 RPM EIDE (PATA) computer laptop some time ago.