Tray app disc

Similar Questions

• TRAY APP

  WHEN REBOOT MY SONY VAIO - XP COMPUTER I GET A MESSAGE THAT SAYS THAT THE HP SOFTWARE IS UNABLE TO LOCATE THE APP FILE TRAY & WANTS ME TO INSTALL THE DISC W / TRAY APP ON IT IS VERY FRUSTRATING IS THERE A FIX OR A SOLUTION THAT REQUIRES ME INSERT THE SOFTWARE DISC TO CLEAR THIS MESSAGE?    I HAVE A PHOTOSMART HP 7250 USING A USB CONNECTION.  I HAVE NOT HAD PRINTING PROBLEMS.

  Message edited by EDTEK on 27/01/2009 19:27

  Hello

  Click here to fix this problem. As you experience the trayapp problem, find and highlight this APP TRAY in Windows cleaning window, and select Remove. Restart your computer after you perform the following steps to check if the annoying window reappear.

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• From my pc and or enter a program, this is what appears ~ Installation of Tray / App.msi

  I have a hard time with this question, I need help to understand what is the error and what it can be attached?

  The error appears when starting upwards and then when stepping into any program.

  the fratures you are trying to use is on a cd-rom or removable disk that is not available, if you click OK or trying to close this message, he continues to say Windows try to configure the insert Tray/App disk and click ok ~ installation package "tray / app.msi.» I am able to keep closing it but it comes back.

  can you tell me a step by step fix, if there is on or how to understand what it is and then a difficulty?

  Hello

  Your problem is nothing to do with Microsoft and Vista.

  It's a problem of HP.

  Read the information about HP.

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c00811375&tmp_track_link=ot_recdoc/nps05679/en_UK/c00811375/loc:1 & cc = uk & destPage = document & dlc = en & lc = en & printable = no & softwareitem = ob-78138

  See you soon.

• Tray app keeps coming back and still wants to install

  Original title: I got 2 programs at the same time a program called tray app wants to install this fact get difficult to get on PC

  I have vista and when I put the pc a program called tray app comes in saying he wants to install this program and I had a hp printer installed but but I tried to take that memory to come up to be installed, it is really slowing down my pc very slow and crashes

  TrayApp.msi belongs to the HP printer software. Apparently, you have not completely uninstalled the printer.

  HP - resolving MSI startup errors -http://tinyurl.com/24sh45

  MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 problem printer HP C3100 get Windows 7 Tray App problem

  Initially I had XP on my desktop, butI couldn't find a laptop to support XP when I bought it hoping that two systems ranging from the same House netwotk wouldn't be a problem. In many ways, he did.  The first thing I noticed was that my fairly new HP C3100 printer compatable with wasnot inkjet

  Windows 7. So I movedit down and installedit on the Vista laptop.  A bit annoying, but at least I didn't buy a new printer.  Finally, I watched just by ofcuriosityif the State of the printer is spent on Windows 7.  It was changedso that I dragged the printer upward.  I'm doing Graphic work when it was better to not go down every time I printed something.  It is then that tray app vengful problems began. He ruined mostof my computer experience.  I couldn't add Rhapsody without receiving a message on reload.  That did not work. I don't seem to be able to find

  the information I saved. Programs like Google has haunted me toupgrade to Chrome, I download the 6 files, but I still don'thave Chrome.  I learned by a representative of Microaoftthat that she would always help me.  After 3 hours I couldn't take more.  So if there is nothing, I can do about it,

  Please contact me within this forum

  Hi DebFreda,

  Follow this article that should help you.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  All d best!

• What is Tray App and how do I get it my computer?

  Original title;! ??? TRAY APP? !!!

  I'm going nuts!  I don't know what app 'plateau' is and how to get rid of... it won't let me cancel and I now download problems.

  Tray app can be many different applications that load automatically in the windows startup process.

  Click on the start bar

  Click on the search bar

  Type "msconfig".

  Click the Startup tab.

  You will see what would normally be the starting of applications and you can try to "revise" the app is a failure.

• Tray App and browse pop up constantly. If you try to cancel, another popup trayapp.msi rises

  Original title: A pop up comes continuously throughout the use of the computer, it says TrayApp___Tray App and browse popup continues; If try to cancel another pop up trayapp.msi, nobody knows what I did to get it and how get rid of it, it's so boring? __

  TrayApp disk with Browse below, after that I made a few changes to format and import documents, now can't get rid of it, can anyone help, if cancel the smallest error TrayApp.msi popup, but continuous between the two and her since may, help

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00811375 MS - MVP - Elephant Boy computers - don't panic!

• TRAY APP error 2203 - HP printer unsinstalled but...

  I unsinstalled HP printer and I don't have the CD and don't want that, but I still have an application of the status bar whenever I start my computer, and it takes time to try to close this... can I please?

  If do you everything the PML has offered and will still have the problem, some of them exist under the name of 'services '.  Display the services (start-> Run-> "services.msc")
  Then look for the services that begin with "HP".  If you find one of these programs, double-click it, click "stop" to stop, then change the type to "disabled".  Which should prevent the service to start.

  HTH,
  JW

• How can you remove tray app ps a10 c4580 04.

  it flashes until all few seconds saying it tries to download but needs ps a10 c4580 04 cd rom.if you try to print the page it crashes firefox.it even prevents you from uninstalling mozilla.

  Hello

  You made any hardware or software changes the computer recently?

  Method 1: Clean boot.

  Try to put your computer in a clean boot state, and check to see if the same problem happens. By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: after the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  If you suspect a virus infection on your computer, and then try the steps in this link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-remove-a-computer-virus

  Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• "TrayApp".

  For the last two days, whenever I turn on my lap top I get the message that it cannot configure "TrayApp", he then asks to insert tray app disc 1 which I know nothing on... someone help, it's driving me crazy!

  TrayApp usually belongs to the HP printing software. Equip your CD of the HP printer. MS - MVP - Elephant Boy computers - don't panic!

• How can I reinstall the app tray?

  Everytime I open internet explore a box opens to install Tray app.  It tells me to use my disc but I did not.  How can I solve this lift every time.

  Hello

  To add to Jeeped good advice:

  Dell and others also have similar application modules.

  -------------------------------------------------------------------

  If you can determine what add-on, it is then you can remove and reload it.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.
  http://www.Malwarebytes.org/products/malwarebytes_free

  --------------------------------

  For Vista:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------

  For Windows 7:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows XP has been infected with a virus/trojan via the net and will pop up window wanting to access the app tray and Windows install wants to work.

  Original title: tray app

  I have a PC with Windows XP. He has been infected with a virus/trojan via the net. I can't access the net, but I have now access to readers of DVD and CD. On the screen is a window who want access to the application of the status bar. I don't have a restore date prior to infection. Installer Windows guard eager to work. How can I get going again and remove the virus/Trojan? I also have a laptop with windows vista. I can download MSE on my laptop for windows XP and copy it to a CD and then use it on the PC?

  Hi shanethornton,

  You can try to download Microsoft Security Essentials from the link below for a CD or a USB key and try to run it on the infected PC and check out them.

  See the link to download Microsoft Security Essentials:

  http://www.Microsoft.com/security_essentials/?WT.srch=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to stop the app tray popping up

  operating system is windows 7.  How to stop tray app of popping up 8 or 10 times every time that you start the computer. Repair sites are BS. All they want is money. Can someone explain how to get rid of this parasite of aggrevating?   Help, please!

  trayapp is associated with your printer software installed HP (which probably is NOT supported in IE9 & superior.

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.