TrayApp window is displayed, what do I do?

Similar Questions

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  My windows cannot display the volume on the taskbar control, I think that volume control program is not installed, what should I do?

  Have you tried the following tutorial?
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  The tutorial is for Vista, what operating system are you using?

  t-4-2

• igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

  igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

  Hi Bob Bala.

  
  Thanks for asking this question to Microsoft Community!
  
  As I understand it you receive a startup message all to connect to the computer.

  He would be grateful if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?
  
  I would suggest trying the following methods and check if it helps.
  
  Method 1:
  
  You can try to check if the problem occurs in safe mode and check if it helps.
  
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Method 2:
  
  If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
   

• "laptop HP 2000: why should I keep my keys for a second for my keyboard display what i type.

  "Why should I keep my keys for a second for my keyboard display what i type.

  Hello

  Check the following points.

  From the windows control panel, open the ease of access Center and click on the link "make the keyboard easier to use.  If there is a check mark in the box beside 'Turn Sticky Keys' or ' turn on Filter Keys, Remove these and then click on apply to apply the change to see if that solves the problem.

  Kind regards

  DP - K

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Impossible to display the Windows Firewall GET an error due to an unidentified problem, Windows cannot display Windows Firewall settings

  OP: Problem with Windows XP service pack 3__ firewall settings

  When I try to view the settings of the firewall, a dialog box appears saying "Due to a problem not identified, Windows cannot display Windows Firewall settings".

  I read a thread on a file to merge with the registry of XP SP2. I did not like I do not know if it would work with SP3? or should I do something else?

  In addition, why is that happening? What is the problem with the Windows Firewall? If this has happened for some time is a Microsoft patch that can be downloaded instead of trying to make mergers of registry (I'm not very happy to do).

  Thank you

  "See if it's the same window that you see - Windows cannot display Windows Firewall settings" error when you access the firewall settings in Windows XP
  If this is the case, then follow the steps put in place for Solution for case 1: MowGreen Expert from Windows IT Pro - consumer safety

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.

  Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.  I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails.  When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder.  I have Windows XP with SP3.  This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files.  Help, please.

  Thank you

  You're still infected:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Answer the following questions on your next post: brand and model of the pc, what is your antivirus?

  Run all the analyses above, complete, such restart required.

• Windows cannot display the xp sp3 firewall settings

  I tried and did not work start > run regsvr32 hnetcfg.dll [Enter] cannot find module I also tried sharedaccess.reg which doesn't work anymore

  If that's what you get:

  "Due to a problem not identified, windows cannot display windows firewall settings"

  Try this:

  To resolve this problem, two DLLs must be re-registered:

  First: click Start-> run, and then type

  regsvr32 c:\windows\system32\atl.dll
  and click OK

  Second:
  regsvr32 c:\windows\system32\hnetcfg.dll
  and click OK

  This should enable the display and the configuration of the XPfirewall settings.

  The solution above was taken from: [http://www.techspot.com/vb/topic18437.html]

• The screen of my laptop turns off when windows start. What is the cause and how can I fix it?

  Original title: computer failure

  the screen of my laptop turns off when windows start. What is the cause and how can I fix it. Thank you

  You have the screen image out to another monitor (one that is not plugged in fact). How you pass to the internal laptop display varies, but most cell phone companies make a combination of keys, such as Fn + F6 or something.  Looking for a symbol that looks like a monitor.  It is usually color coded and requires activation of a Fn key.

• Server Windows media displays is not on (2) media players network, network TV or DVD player in a network. Other Windows 7 computers work fine.

  Server Windows media displays only not on (2) (wireless) network media players, network or network TV a DVD (both connected via Ethernet). Another win 7 computers on the same network (with no wireless or Ethernet) show in all devices. This computer has the same exact settings as other computers and shows the network devices, that it SHOULD be streaming. "Play to" does not work.
  Nero Home Media has been installed on this computer (and others) and shows on all appliances without a problem.
  What is wrong?
  Lenovo Think Centre
  Professional Win7
  i7 processor.

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

• How can I get the indicator private Window to display?

  When you select new private window I don't see the indicator with the purple icon on the upper side right of the window. I have Firefox at work and when I open a new private window, it displays a purple icon on top of my new window, at home I do not see that.

  Thank you guys, by adding the extension to disable the navigation and adds the extension of the private LAN tab took care of my question, now, when a private tab is open I can see the purple mask flag.