[TRE] I tried to use the system of TAR utility (compress does not)

As above, I use system() to call the "TAR" command, it works with - cf, I tried to add compression using - z and the archive has not been created, I use test.tar as the example of name of archive and the file has been created, but it seems to be empty, use it without work - z if.

zip is there but in/usr/bin, so you can compress in a separate step.

Tags: BlackBerry Developers

Similar Questions

  • Function of the file/etc/Upload of an open file of the application, using the file as a utility Explorer, does not work on my Win7 PC.

    If I run the file Explorer (open) by itself right clicking the my computer icon on the desktop, or work when I double click on the shortcut to My Documents on the desktop, all files are visible (except the system and hidden files, by default, of course). I don't think it's File Explorer itself, for reasons described. It must be an add-on, or ACCELERATOR, as it is called when this functionality is provided for other applications or the Internet Explorer browser. 10, IExplorer even the fact when I want to attach a file to an e-mail in the tab of the mail.live.com browser or dialog box that prompts for a download location and the source file. The only place where I can browse the file Explorer to display its content, is the office. I have automatic updates for all my Windows software installed on my PC, as well as for all my applications. This happened for months, and the only work around is to copy the files to the desktop, take them out there in my app/browser and then delete. It's a pain in the thigh not only because of the increased workload, but also because my OS is running on a very small SSD drive (128 GB), reserved for the windows and the user * he pours on the system drive. All this extra activity write/erase on my system drive is exhausting the ability of my SSD FLASH prematurely. All my software is installed (when installing allows) on my D: drive, but it has been so since I ran Windows 98, it is NOT the cause of the problem. Any help will be appreciated!

    Hello

    We will analyze and identify the cause of the problem.

    Method 1:

    You can run the Fixit described in the article:

    Diagnose and repair Windows files and folders problems automatically

    http://support.Microsoft.com/mats/windows_file_and_folder_diag

    Method 2:

    Safe mode


    Perform a SFC scan on your computer. Consult the following link:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Hope this information helps. Response with status so that we can help you.

  • I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

    I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

    I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

    Post proposed by the facilitator for the appropriate forum placed

    Hi Michael,

    We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

    Let us know how it goes.

    Kind regards.

  • Error: "the system restore is disabled by group policy" when he tried to use the system restore

    Original title: group policy

    When I try to use the system restore, I get "system restore is disabled by group policy. How can I fix this problem?

    Hi bluelilly,

    1. is your computer connected to a domain?
    2. don't you make changes before the show?

    This occurs if the Configuration policy to disable is enabled on your system, either by using Group Policy or through the registry editor. For stand-alone systems Windows Vista, follow these steps:
    Step 1: Using the Group Policy Editor. If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:
    a. Click Start, type gpedit.msc and press ENTER.
    b. go to the following branch: Computer Configuration | Administrative templates | System | System restore
    c. double click on disable the Configuration and set it to not configured.
    Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
    d. Quit Group Policy Editor.
    e. restart the computer and check the difference.

    Step 2: Using the registry editor
    a. Click Start, type regedit.exe and press ENTER
    b. navigate to the following key: HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
    (c) in the right pane, delete the value named DisableConfig.
    d. Quit Registry Editor.
    e. restart the computer and check the difference.

    Very important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
    See Registry backup

    If your computer is connected to a domain, then we recommend that you post your query toTechnet Forums Windows Vista to improve the assistance.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Tried to download the latest version, but my computer does not support. While trying to install it replaced my old version and now have no firefox

    For months its been my firefox browser is out of date, saying tour so, today, I finally managed to update but when trying to install it, it removed my old version and when I tried to install the new one it says it was not compatible. So now I have a version that does not work and if I remove I don't have Firefox at all. I stress because everything (100) my favorites where on the old version.

    I tried and tried to find an older version, but either they are either not compatible or the file does not exist. I'm a bit of a technophobe so I know what else to try.

    Help, please

    Katie

    You can also find it on the CDN server.

  • Error 'System restore running system' starts with a black cursor screen while trying to use the system restore

    Original title: unit hanging in the middle of the restoration of the system

    Message "System restore running system" starts with a black screen with cursor, but does not move forward.  Windows Vista question

    Have you tried F8 solutions and when I select the system restore it gives me the message above and goes to the black screen even ugly.

    How did I break the loop so I can start a new system restore?

    Hello

    Are you trying to restore your computer or you try to create a restore point?

    Step 1 or 2 can help you to restore your computer.

    Step 1: Try the steps in the section below, if you haven't tried it.

    Start the restore of the system from a command prompt
    http://Windows.Microsoft.com/en-us/Windows-Vista/Start-System-Restore-from-a-command-prompt

    Step 2: Try restoring the system from the recovery console.
    Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

    Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Measures to check the application event log:

    a. Click Start.
    (b) in the search box type eventvwr.msc, and then on enter.
    c. now, click Application in the event viewer (local).
    d. now, looking for event log on the right side of the event viewer window.
    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

    Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/system-restore-wizard-is-already-running/c797baf7-c069-4e3a-894a-e9644cc6df0b

  • Cannot open iPhoto Library as it says library version is too old - have tried to download the iPhoto library valuation tool - still does not open.

    Hi, I saved my photos on my passport, since I upgraded my phone and now I can't open the photos as it says that the version of the library is too old. I've uploaded my photos from my old laptop to my new office using my passport and still can't open. I tried to download the iPhoto library valuation tool but still does not open. Can someone please?

    Thank you

    I tried to download the iPhoto library valuation tool but still does not open.

    But install you and run the iPhoto Library upgrade?  Just the download is not enough.  You need to open the library in upgrader iPhoto library and let it prepare the library.  After installation, you will find the iPhoto Library upgrade in the "Utilities" folder in the "Applications" folder

  • vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

    I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

    Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

    Thanks in advance for your suggestions on how to correct the problem.

    Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

  • vSphere 5.5 using the uplink of LBT group that does not have a good way

    We use LBT since our recent deployment, which is new for us.  Everything seemed fine and dandy, until recently the VMs began dropping their connectivity to what looked like at random times.  The first fix out the door had to disconnect and reconnect the vNIC for each virtual computer.  Sometimes, it took a few tries before it worked.  We discovered that LBT moved VMS to the other group of uplink, which was a physical affair.  Unfortunately, someone didn't configure the port correctly on the remote switch, so while link came, he could not access the VLAN correct.  My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?  He seeks only a physical link?  Looks like this problem waiting to happen.  Or, more likely, we have something misconfigured.  Any help would be wonderful, I don't like the idea to return to etherchannel or LACP with IP hash with blades chassis.  Thank you!

    My question is, why the LBT would move virtual machines to an uplink group which did not have a good way?

    Is that a "good path" can mean many different things in different circumstances of different points of view, if it's out of reach for LBT. It will be only on the physics of the status of the link. There is beacon probing too which can detect switch upstream outages but it can be used only with at least 3 vmnic uplinks and it has a few disadvantages, see:

    http://virtechgeek.com/2013/05/06/beacon-probing-vSphere-network-policy/

    http://thomaslowblog.blogspot.de/2011/10/vswitch-network-failover-detection.html

    You can use the dvSwitch health check feature to make sure that all the natachasery of all the hosts connected to a dvSwitch can access the same VLAN. It will not prevent LBT to move virtual machines, but it will at least raise an alarm if a bear cannot access a VIRTUAL LAN. Take a look at this article:

    http://wahlnetwork.com/2012/08/27/new-5-1-distributed-switch-features-part-1-network-health-check/

  • use the ip address in listener.ora does not

    Hello

    A strange problem in listener.ora, if I use 'localhost', or the name of the computer, then everything is ok, but when I try to use the ip address, then I got an error ORA-12541: listener TNS:no

    the listener.ora file that works well


    listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.

    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (= Extproc PROGRAM)
    )
    (SID_DESC =
    (GLOBAL_DBNAME = HMIHD)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (SID_NAME = HMIHD)
    )

    )

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
    )
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
    )
    )

    the listener.ora does not

    listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.

    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (= Extproc PROGRAM)
    )
    (SID_DESC =
    (GLOBAL_DBNAME = HMIHD)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (SID_NAME = HMIHD)
    )

    )

    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
    )
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = 10.183.7.89)(PORT = 1521))
    )
    )

    the only change is to use the IP address of the server 10.183.7.89 instead of localhost and if I change the ip address of the computer name, then its also works well.

    The server runs on vistual box, I don't know if the machine vistual causes this problem,
    I just want to confirm: I use the IP directly right?

    Thank you inadvance!

    Reacted little after you have validated, but authentication Jives agie and my answer has been lost. Not the first time that I lost OTN due issues Jives or descending OTN responses. Well...

    My response was as follows.

    Your listener begins listening using the host name of the server. This binds the 1521 port to all the IP addresses on the server. A new IP address must be created, which will be also automatically supported and connections port 1521 he will be accepted by the listener.

    The AMT ORCL aliases connect to port 1521 on localhost (127.0.0.1 IP address). As the listener listen to all this server IP addresses, the client connection is successful.

    The listener is then replaced listening on a specific IP address. Now the listener only listening on port 1521 on this IP - and no other IP address of this server.

    The alias of tns ORCL now tries to connect using 127.0.0.1 - and this IP address is now supported by the listener. As a result, the connection of the client fails.

    If the tns ORL connection uses the same IP address as the listener, the connection will succeed. The ORCL alias can either use IP address directly, or a host name that will solve in that intellectual property.

    The basic rules are:
    -If the server name is used, the listener use INADDR_ANY indicator socket and tie the port to all the this server IP addresses
    -If the IP 0.0.0.0 is used, the listener also links the Harbour to all the this server IP addresses
    -If "localhost" or a specific IP address is used, the listener will tie the port to only this specific address and no other server IP addresses

    The client to connect, use one of the IP addresses that the listener is listening. The customer can use:
    -the host name so that the intellectual property (the host name must resolve to the IP address via the file DNS or hosts )
    -l the address real IP itself

    Use the following command in Windows to see what IP addresses and ports, the listening process is listening:
    Netstat-b - n tcp Pei

  • Trying to load the plugin snippetRunner sample, but it does not load

    I tried to load the pluggin SniipetRunner sample and open Indesign.

    InDesign has successfully opened and shows other plugins in the plugin drop-down list but now SnippetRunner

    any idea?

    I had the same problem. The SnippetRunner are located under 'Window' in the menu bar. A screenshot can be seen here: 5 http://stackoverflow.com/questions/23214516/indesign-sdk-sample-plugin-not-working/2323971 23239715 #

  • Hello. I have updated my OS from Windows 8 to 10 of Windows. Now, not even one of the sofware CC went, someone tell me how to fix ork more (I use PS, ID and AI). I ve tried to delete the end of charging, but it does not help.

    Could someone tell me how to solve the problem? Does anyone else have the same problem eperinced?

    Moving to Illustrator

  • Need help to get the system restored after Trojan virus. does not work in safe mode

    We were running without anti-virus software.  System started running very slow and wouldn't normally.  He has started in Mode safe has finally got and ran Malwarebytes detected 2 Trojan virus.  Those removed, installed Norton in safe mode, but can not get computer to open in normal mode for the comprehensive analysis of norton and difficulty.  Help!

    The only way to be sure you are free of malware is to format and start over.

    If you have a backup from before the problem you can restore.

    If not and you have the win 7 dvd you can re - install.
    '
    If not and you have a factory restore partition, you can restore from that.

    If this isn't a clean install.  You will need a win 7 dvd and number series.

  • Failed to load the YouTube video. 1 of 10 works for me. It started yesterday. I have tried rebooting, cleared the cache. Ads work, video does not work. Flash set updated to 13.

    Maybe 1 out of 10 maybe youtube videos works. My Favorites, including music videos have been working very well and now only a couple work. I cleaned my cache, restarted the computer, update flash and nothing worked. Installed chrome, did not work. I don't know what the problem is. Ads are working perfectly well...

    I just remembered something. YouTube blocks some content
    Depending on your situation. But you will get a message if this is the case.

  • The update of creative cloud worked for Photoshop.  However, it shows my LR 5.4 'up-to-date' and the CC version will not load.  Advice has been uninstall LR using the program uninstall Adobe, but it does not exist on my iMac with the Mavericks.  I am supp

    Sorry for the long title.  I thought that I was actually asking.  Why can't I update my LR LR CC 5.4?  I have an iMac 27-inch running the Mavericks.  I have a lot of space on my hard drive and have 16 GB of RAM.

    Long titles seem to happen a lot since the last forum updated software isn't just you!

    There is no CC Lightroom. You get the latest version (currently 5.4) with creative cloud, and the CC app so right to say that your LR is up-to-date. Unlike most other Cloud creative applications and Photoshop, Lightroom is not labelled as 'CC' because it is also available separately as a product standalone perpetual license. When 5.5 (or 6.0 - or even a CC version only) is available in the future, the CC app should invite you to update, and then in the meantime, you good to go.

    M

Maybe you are looking for