TRENDY BUT NOT SE NOT CHARGING

I just bought my HP Pavilion DM1-4118AU last May 1, 2012.

I installed clean Windows 7 Ultimate x 64. After a day of use, whenever I plugged it in the AC, battery does not charge.

It is said, hip but not supported.

What should do? Please help me.

I did the next thing but nothing has worked for me.

-J' I remove my battery and reinserted, but that has not worked on.

-I have reinstall compatible battery Microsoft ACPI control method.

-J' followed this http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/ (saw a lot of people posted this on different threads)

-J' tried to charge my laptop from somewhere else other then my room.

-I don't have day my BIOS with the latest version of this link.

I hope for your help and your response.

Thank you.

m

Ayad?

So I have my dm1 fired and replaced. From now on. It is ok. Thank you very much for your answers!

Tags: Notebooks

Similar Questions

  • Satellite L500D-11R - plugged in but not charging

    Hello

    I had a Satellite L500D-11R windows 7 - its fine loads (light orange deep) when it is off, but when running, it will be reduced to an orange flashing light and will not load.

    in the taskbar windows says its plugged in but not charging - unplugging and plugging back in cures repeatedly sometimes the problem

    Ive updated the BIOS to V1.50, but it still happens

    the ideas people?

    Carl

    Remove the battery and start your laptop with AC power only. When windows is fully loaded, put the battery in place.

    What happen exactly when you do this?

  • battery plugged in but not charging

    Original title: why does my battery not charge? It keeps on saying plugged in but not charging

    He has not yet changed.

    Hello

    -What is the brand and model of the laptop?

    Was there any change in software/hardware performed on the computer before the show?

    I would suggest trying the following steps and check if it helps.

     

    Method 1:

    a. turn off the laptop completely.

    b. remove the battery from the bottom.

    c. leave the battery of the laptop for 5-10 minutes.

    d. plug the adapter into the laptop (still remove the battery).

    e. turn on the system and let it fully boot in Windows.

    f. once it arrives on the desktop to launch all startup items. In other words, do not interrupt the boot process until everything is prepared.

    g so go ahead and shut down the computer normally (using the START > turn off computer method).

    h. once the system is turned off, plug the battery back in and turn on the computer.

    For reference:

    Solutions to common battery problems

    http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

    Method 2:  Uninstall the device battery from the Device Manager

    a. click Start , and then start the Device Manager type in the search box and press ENTER.

    (b) this will open the Device Manager.

    c. under the battery option, right-click on the device that you see (method battery compatible ACPI Microsoft control) and click on Uninstall.

    d. restart the computer. Windows will automatically detect the battery and try to install the drivers.

    e. Once done, check if the problem persists.

    If you have a spare adapter, connect and check.

    If the problem persists, I suggest you contact the computer manufacturer for assistance.

  • Laptop computer charger plugged in but not charging

    Hello

    I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.

    Sudroid.co.cc

    There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.

  • My Satellite phone is plugged in but not charging

    Plugged in and not charging - what it means?

    If your laptop runs correctly but the battery is always on 0%, I assume that the battery is faulty and should be replaced.

    I have the same issue on my Satellite A300. Battery is recognized correctly, battery charge LED is orange (State of charge) but battery stays on 0%.

    Which machine do you have?

  • EliteBook 8540w: battery - battery load, but not charging

    Hello

    My HP elitebook 8540w works perfectly accept for one small thing, the battery. The laptop is bought in 2012.

    When my battery is mounted and the AC is plugged in, it is said: connected Ac, battery charging. But in fact the battery in the logo remains static, and it does not charge. It's already a second new battery (first, I asked the supplier of spare batteries to send a new one, ordered through parts EET, accepted HP dealer for replacements).

    When I run hp support assistant, he says: the battery is faulty, replace immediately.

    Underneath, it gives the code: 9LN162-000000-XD7U3F-C0CU03

    This was also the case with the previous "new battery." Same code.

    I lost faith in the assistand of support from hp on this part, since it is already a second new battery...

    I've tried all - remove driver for battery manager and holding down power button and other things.

    Does not work. The fault could be in the laptop?

    Help, please?

    Niels

    I contacted the service to call hp and they told me that the error code is not really explain anything about the specifics of the problem. It's probably the connection between the motherboard - battery and AC adapter plugin, because I tried different batteries, adapter, software reinstalls etc.

    One thing however, HPA, he says that the status code is 0c. I have not encountered this code while browsing the web, you may know what it represents?

    I will contact a repairman to do the hardware checks, since I am out of warranty.

    Thanks for your help!

  • Y40 charger plugged in but not charging

    I've recently had problems with my battery display is stuck at certain percentages and display incorrect percentages. I then updated for Windows 10 of 8.1 and now when I have the charger is connected to the laptop detects it, but it says that it does not charge. I tried to follow the instructions online to solve this problem, I uninstalled the drivers under the battery in Device Manager and then restarted but nothing has worked. If anyone knows how to fix it please let me know!

    I figured it out, just had the setting out of battery on the health of the battery optimized so it could not load completely. Ridicule me.

  • Plugged in but not charging

    Hello.

    I noticed that my (big) 18 months, pavillion g6 Windows 8 ceased to charge its battery, I noticed yesterday and thought nothing of it but today I took the battery up to 92% but it does not load. The AC adapter led is flashing orange even when unplugged.

    Any help will be much appreciated.

    Thank you in advance.

    Dear customer,

    Welcome and thanks for posting your query on the Forum from the HP Support

    It seems that your laptop is not charging the battery, we will surely help you this question

    Please run illustrated steps below to solve the problem:

    Step 01. Click the Start button

    Step 02. Type "Device Manager" in the start search box & open Device Manager

    Step 03. Get piles and expand it by clicking on the symbol to the left.

    Step 04. Right click on "Microsoft ACPI Control method battery compatible" & uninstall

    Step 05. Shut down the laptop

    Step 06. Please, remove the battery and unplug the AC adapter

    Step 07. Press and hold the full power 1 minute button

    Step 08. Go ahead and replace the battery and plug the power adapter

    Step 09. Search for "Load connected" message on the battery icon

    After completing all the steps, if you are facing the same question again, please do more than three steps:

    1 perform a check of the battery in HP Support Assistant [install the software, if this is not available]

    Note: Replace the battery if check the health watch replace

    2 update the latest BIOS for your laptop on the Site of HP Support

    3. Please check your laptop with a known good power adapter & battery from a different laptop

    Note: If a known good battery also in charge isn't, we need to replace the motherboard

    How to improve the life of a battery:

    1. it is not advisable to use the laptop when the adapter is plugged

    2. it is not advisable to keep the power supply plugged in even though the battery is fully charged

    3. you must drain the battery completely before recharging it again

    4. Power Plan must be set correctly for extended battery life

    5. Please keep the brightness of the screen to the lower level

    6. Please turn off the Wi - Fi Connection when not in service

    7. remove the disc from the optical drive when not in use

    Test and calibrate the battery (Windows 8)

    http://support.HP.com/us-en/document/c03325217

    Test and calibrate the battery (Windows 7)

    http://support.HP.com/us-en/document/c00821536

    Calibration of the battery for laptop (Windows Vista)

    http://support.HP.com/us-en/document/c00817650

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • 12 cell Battery (pluged, load) but not charging

    I bought a new battery 12 cells, I have a hp pavilion dv6 1211ax ;

    the problem is that after I unload completely the battery does not charge after that.

    I managed to load the battery afer the critical battery warning (no questions). * battery health is also good

    its my second battery, I was replaced, but the same thing happened to it. In hp help and support under trobleshoot I checked the status of the battery is showing the battery status is not good need to replace the battery. It may be under your warranty period.

    Please help me...

    Try this, can help.

    battery and power cord 1 / removal

    2 - Press the power button for 30 seconds

    3 reinstall only the power cord for the first start. In Device Manager, expand the entry for the Batteries, do a right-click on the compatible Microsoft ACPI control method battery and select Uninstall .

    4. when the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery, plug the AC adapter and turn on the laptop. Windows will automatically reinstall the driver

    You have the latest version of the BIOS update your Support/Drivers page?

  • Alienware M14x battery plugged in but not charging

    Hello

    I'm using a computer laptop m14x and in the last week or so whenever I plug my charger does not charge the battery and so it must be plugged in at any time to use my computer. There is a message when I start the computer saying that it does not recognize the charger, but it isn't the charger I got with the laptop and battery in the corner icon at the bottom right says hip, does not support. Does anyone have a solution? Thank you

    stefan1024,

    Try this...

    * Turn off the laptop
    Unplug the adapter from the laptop
    * Disconnect, then reconnect the power adapter in the power outlet wall
    * Remove the battery from the laptop
    * Press and hold the power button to laptop in 30 seconds
    Reinsert the battery and connect the AC adapter to the system
    * Turn on the laptop

  • My laptop is plugged in but not charging

    My phone displays 'sometimes' that it does not load even if the power is connected.

    I called HP Tech Support twice.  Each time, they asked me to update the BIOS and firmware

    before performing the battery test (both at startup and using HP diagnostic S/W).  The test always

    said that the battery is OK.  I can run the laptop without battery installed without any problem, which

    probably does the charger.

    This problem comes and goes.  HP is unwilling to do anything until the problem can be clearly

    identified.  My warranty is about to expire (in 3 days), and I'm afraid that this problem won't get

    resolved before this date.  Could someone help me with this problem?

    Thank you.

    JC

    Thank you billtorbitt. Without knowing more about your question, here's a myriad of battery related documents. Go through all and let me know what you have determined is causing the problem. The first document was probably the most relevant troubleshooting if your battery seems to be not charging.



    Battery not power Notebook or hold a Charge:

    http://support.HP.com/us-en/document/c00259897



    Battery charge delayed when you use the laptop in a high ambient temperature:

    http://support.HP.com/us-en/document/c02535922



    Battery only will not load when you use an adapter of tension with the power adapter:

    http://support.HP.com/us-en/document/c00274778



    Battery indicator light turns on and off while battery is charge:

    http://support.HP.com/us-en/document/c00287805

  • Z570: Plugged in but not charging status message

    Hello

    I recently had a computer laptop z570. I get status above message "trendy but no charging current.

    What is the reason for this?

    What is an adapter or battery problem or one other change of parameter to enable this

    I tried the 'Balanced' & 'High Performance' option on the options of power but had no luck.

    Can someone give clues on this issue because I believe that this must have been discussed before here?

    Thank you

    try to remove/replace the battery first. Also try this trick: remove the battery and AC power, press the power button / stop for 30-40 seconds, replace the battery and check if it works.

  • Z400 ideapad battery plugged in but not charging

    Hi, I bought my z400 lenovo ideapad early April this year and there is little about two days he just off and if I plugged it later he started to say "trendy but no charging current. What do you think is the problem?

    I lost the receipt (invoice) However, there is still the model/serial No., the warranty is still on please?

    Hello
    Welcome to the forum
    Just to add on what is discussed, if the battery level is about 60%, roughly 58-59%, then this thread should help
    http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-Z500-disable-battery-charge/m-p/9652...
    Concerning

  • Satellite L655 - plugged, but not charging

    Hello

    I have an a computer Satellite L655 laptop and it worked very well to the top until there's a week, where all of a sudden it shows the message: 'PLUGGED in NO CHARGE.

    After a bit of troubleshooting, I tried many things including the battery removal and runs directly to the a/c power. Everything seemed normal from a mechanical point of view.

    However, after having also updated the driver software of all 3 components of the battery (found by Device Manager), the only thing that works every time, but is quickly reversed, is actually uninstall 'compatible Microsoft ACPI control method battery'.

    First of all, I don't know what this is... but I can't have to do each day in order to get my laptop to load. I can't always have a power when I need to use my laptop... can someone please help me know what on Earth has happened to my laptop and what I can do to fix it permanently?

    Thank you very much

    Anelia

    Hmm, you could try to remove this compatible Microsoft ACPI control method battery and could change the automatic installation of the driver for the device.
    1. Click Start, right-click computer and then click Properties.
    2. in the list of tasks, click Advanced system settings.
    3. in the System Properties dialog box, click the Hardware tab, and then click Windows Update driver settings.
    4. Select never check for drivers automatically when I connect a device.
    5. click OK twice, and then close the system dialog box.

    Now the driver for control method battery Microsoft ACPI-complaint should not automatically install.

    But I guess this isn't a better solution for you, but probably only system restore would help solve this problem.

    Otherwise, it could be a battery problem and this means that the battery must be replaced.

  • Qosmio is plugged in but not charging

    Hello

    Yesterday, I spilled my shake on my laptop... I managed to open it clean and everything works well EXCEPT MY battery, it is at 0% and every time I remove my AC my laptop turn off, then, what do I do is my battery died or my charger connector?

    And what do you recommend I made m from Chanute, Kansas. I tried to call the Toshiba support center, they said that my laptop is still in warranty but they can't help me because I can't drop my laptop to Toshiba service!

    Weird assistance):
    Thank you

    It is clearly defined that is covered by the warranty, and what cases can be repaired for free. Certainly, your question is not covered by the warranty. If there is mechanical damage caused by the owner he will not be repaired for free. Service box help m from you, but I'm afraid you have to pay something must be changed or repaired.

    On this virtual path we cannot say with certainty what the problem is here, but all electronic power supply must be checked. To be honest, I can't imagine that the battery may be defective.

    Anyway, what you can try is to get the new battery, test it and if the situation is the same it must be a problem with the power electronics placed on the motherboard.

Maybe you are looking for