Treo 800 Call Log shows no incoming phone calls

Similar Questions

• BlackBerry Smartphones device address book phone contacts not showing on incoming calls on new 8900

  Hello

  I just got a 8900 last week which has the latest version of the software on it (V.6.1.114). I transferred some of my old numbers to my SIM card from my camera, but not all - I also entered another 100 or manually directly on the device (long story).

  Now, when I get a call from a number on the SIM card, the call will display the name of the person. However, when I receive a call from a number not in the sim card but is stored memory of the native device, the call does not display the name of the person - instead, it displays the number as if it were an unknown number. However, once the call is completed, call logs show the name of the person.

  Thus, the BBERRY is not the number in the device address book when calls are coming in - it refers only to the SIM card. How can I fix it so that the contacts on the memory of the device also upward when the phone rings? Everyone knows about this problem?

  I called Tmobile tech support in the United States and they couldn't help me except to say that it was a bug and suggest to put my name on the map or by doing a hard reset...

  Thank you
  Beverly

  I found the answer in this old thread, but a configuration options default content SECURITY. Once I put no address names started showing up!

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=19706&query.ID=248054...

• How to change the color of the LED on incoming phone call

  I want to change the led color and the pattern on incoming phone calls as the BLUE for example form any program as if you activate my application then my application will run background and will change flashing color BLUE by default RED. How can I do that. Explain if possible with the small piece of code.

  don't deliver sleep directly in the earpiece of the phone, using a new thread.
  the opinion given cannot be changed programmatically

• How can I get evrything of Tungsten E2 Treo 800?

  I just got a new Treo 800.  I have a Tungsten E2 and all my contacts, calendar, etc. on it must get on the Treo.  How do I do that - in simple terms please?  I have already installed the software for Windows XP and I've synced the Treo and my PC.  I want to get the files from Palm Desktop to my Tungsten E2 on the Treo.

  Thanks for help.

  Laura

  You need to change the timing of program the E2 with Outlook instead of Palm Desktop.

  Check your Start button/programs/Palm/PIM Sync Conduit and see if there is an entry called "sync with Outlook.  Click on it to change.

  Once all these info in Outlook, your 800w will synchronize with it.

  If you do not have this entry, you will need to restart your installation disc of E2 and eye for the question, "what program you want to synchronize with. Palm Desktop or Outlook? ».  Choose Outlook.

  (This assumes that you have a copy of Outlook on your computer!)

  WyreNut

  Message relates to: Centro (AT & T)

• Treo 800 and Gmail

  Hi all!

  I don't know how it works, but here goes: I have never consulted a Forum like this one before.

  I have a Treo 800, I got because of all the tools and options it has to offer.  Well its been one headache after another.

  First of all my Yahoo did not work well, then I changed to Gmail because it worked me better.  Now, this does not well either.

  I have a gmail account - on my Treo but 1 it does not sync with my account online and 2 - I can't send emails from my phone.  They are imprisoned in the Outbox.

  Help!

  Welcome!

  How did you settle the accounts of email on your phone? Sync it with your computer?

  To set up a Gmail account, I recommend setting up as IMAP. To do this, you would need to connect to your account Gmail and IMAP compatible under Options if it is not already enabled. Then, follow the steps on your phone to set up the account and refer to this page just for the server addresses and port numbers to complete the installation process.

  Message is about: Treo 800w (Sprint)

• The family safety activity log shows no data for Facebook

  Original title: Family Safety + Chrome + Facebook

  The latest version of Live Essentials is installed on Windows 7

  Parental controls will not register the Chrome Facebook activity.
  I see in the activity that children use, for example, 0.5 hours of chrome, but there is no granular information.
  My daughter spent 2 hours on Facebook and the Family Safety activity log shows no data to Facebook.
  The computer is a new installation of Windows 7
  Live essentials have been installed yesterday.
  All web links for accounts for children have been created yesterday
  Does anyone have a suggestion on how to see real activity?
  Also, before someone suggests using another browser, is not an option, IE is uninstalled.
  Chrome is the only browser used because of all the android devices, we have.
  Thank you

  Client Windows Live Family Safety currently not reported HTTPS traffic unless the web of the child, filtering mode is set to "notify on the adult.  Facebook who worked in HTTP mode has recently moved that the HTTPS site and that's the reason to not see, Facebook or any other site that is HTTPS in the progress report on Windows 7 machines.

  It is resolved in Windows 8 and activity reports should show HTTPS traffic.

  Current work around that for Windows 7 client

  -Set the mode of web filtering to ' warn on adult "- child will receive a warning message if they go to all the adult sites and the parents will be informed in the annual report if the child decides to go to the site.

  Sorry for the inconvenience.

  Thank you

  Shankar

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1

  Intermittent crashes. The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1. How can I find this device? This is probably a hardware problem?

  I look at intermittent crashes, where my cursor becomes an hourglass and the system does not yet meet the ctrl-alt-delete.  In the case of a newspaper, I find

  Event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1.

  How can I determine which physical devices this is associated?  This indicates a hardware problem, or driver or firmware may be the source? The system has worked very well for a few years.  I'm not aware of any change in software that took place recently, although I have had by force, remove and reinstall iTunes earlier.

  I run SMART on all players controls and run diagnostics.  I ran chkdsk on the one I found the culprit, but not mistakes.

  Just in case it was a deadlock linked to memory, I tried to use the Diagnostics memory Microsoft on floppy, but it would not write on the disk (even if I could format and copy the files freely).

  Hello

  Go to your configuration and see which drive is for each port; 1,2,3,4...

  Then go to the Device Manager and look at how many SATA controller you have and how many ports for each, then start count from 0 to IdePort0, 1, 2, etc. for each SATA controller, so if you have 4 ports for each SATA controller, here is how you came from:

  IdePort0 1 -, 2 - IdePort1, 3 car - IdePort2 and road 4 - IdePort3 in the order of road by car

  I hope it helps

• Security log shows connected administrator account when it is not

  No idea why the administrator account should connect with a logon (local) of type 2 when it is not currently connected to the console?

  For some time, security watch logs, immediately, logs user account in my Windows 7 SP1 machine, there are two consecutive event ID 4624, connection type 2, for the successful administrator account by connecting you with identification information explicit.  It is an event ID 4672 setting privileges for this admin account and then a 3634 event, the session is disconnected.   All this is happening less than a second of logon user account, often in the same second.

  This caught my eye today when I was connected but disks have been slowed and then spun wait a few minutes.  Checking the logs showed the same logon activity at the time the boot disks.  System, the installation program, application logs did not show any unusual entries.

  Verified services and scheduled tasks, and none of them run under the administrator credentials.  Ran detectors AV and malware - nothing wrong.  Contacted support the AV vendor - they don't detect any problem.  Use of the network of the machine within the normal parameters.  Firewall logs does not show a successful intrusion.

  Tried to create a new administrator account and disable the old one.  This stopped the behavior temporarily without seeming to affect my machine, but he did it again today.

  Where else I could check or what else could be the cause?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand your concern regarding the issue that you are facing.

  You are connected to the field?

  I suggest you check the event viewer for error logs. See the following steps:

  (a) press the Windows key + X, select event viewer.
  (b) click Windows logs and application logs.
  (c) check the logs of related error.
  (d) paste the contents of the newspapers in your response.

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you

• McAfee security center updates. The event log shows no signature of threat.

  McAfee security center updates. The event log shows no signature of threat. That it states that I am protected I never had any "alerts" from him. Anyone know if it's OK or a way to check it out. The following is in the event log

  Log name: Application
  Source: McLogEvent
  Date: 2009-08-28 17:42:15
  Event ID: 5000
  Task category: no
  Level: Information
  Keywords: Classic
  User: SYSTEM
  Computer: XPS
  Description:
  The McShield service started.
  Engine version: 5301.4018
  DAT version: 5722.0000
   
  Number of signatures in EXTRA. DAT: no
  Names of the threats that EXTRA. DAT can detect: None
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      5000
      4
      0
      0 x 80000000000000
     
      23259
      Application
      XPS
     
   
   
      5301.4018
      5722.0000
      None
      None
   
  

  Thanks for the reassurance. Tech support McAfee response to any problem seems to be reinstalled, I've done a dozen times.

• list of archive logs show only 1 location instead of 2

  Friends...
  OS: OEL 5.5 64-bit
  DB: 11g R2 (11.2.0.3) 64-bit
  I put 2 destination to archive. Log_archive_dest_1 = / u01/archive1 and log_archive_dest_2 under/u01/archive2.
  When I do this...

  SQL> archive log list
  Database log mode              Archive Mode
  Automatic archival             Enabled
  Archive destination            /u01/archive2/
  Oldest online log sequence     8
  Next log sequence to archive   10
  Current log sequence           10

  at the same time, when I do this...

  SQL> select dest_name,status,destination from v$archive_dest;
  
  DEST_NAME                                          STATUS                                             DESTINATION
  -------------------------------------------------- -------------------------------------------------- --------------------------------------------------
  LOG_ARCHIVE_DEST_1                                 VALID                                              /u01/archive1/
  LOG_ARCHIVE_DEST_2                                 VALID                                              /u01/archive2/

  Why list archives logs showing that one location whereas the query indicates both the location. and why list of newspapers of record showing instead of archive1 archive2?
  
  Thank you

  The LIST of NEWSPAPERS of ARCHIVES control gives a quick overview of the State of archive, it clearly should not be used to report on destinations.

  The ARCHIVE_DEST view $ V gives a clear view into where on the disk are these destinations and when you use the LOG_ARCHIVE_DEST_n parameter, is closely related to what has been entered in the file init.ora parameters

  Maybe this might help you http://www.databasejournal.com/features/oracle/article.php/3867646/Oracle-Database-Archive-Logging---Where-are-my-archive-logs.htm

• View call logs, but with contact phone numbers, name, and not only

  I have to be able to show that a list of the call connects to my request.  But for thosenumbers who have a name in the address book, instead of simply to view phone numbers, I have to be able to show the name of the

  number.  (just like the native blackberry app call log done)

  Up to now the following seems to work OK, as long as the amount of data is small:

  • When the main screen is first created, walk the database by calling PIM.getInstance () .openPIMList)
  • Adds a new entry in a hash table for each unique telephone number in the database that points to the name of the contact
  • After that the Hashtable is fully charged, list of call logs
  • As the newspapers call list is displayed, phone numbers search in the hash table, replace with name when a match is found

  But when the Contact database grows, as the order of 500 entries, it takes a lot of time for

  walk from the database to generate the hash table (10 seconds), and while what the application is blocked

  and things seem stuck to the user. This must occur before the first screen is displayed and so after

  the user clicks on the icon and the first screen is being built, the user is thinking ' what's going on..?

  until the screen finally opens.

  Is there an API I can tap in which already provides this mapping for me?  (given a call number journal or by phone,

  Efficiently search the name of the contact with that phone number, if necessary).  That way I wouldn't have to build

  the hash table.

  Or, possibly, some advice on a simple signal of progress to the user while loads of app... This might be simpler than

  trying to tackle the problem with a multi-threaded approach.

  Unfortunately there is no way, I was. I tried to re - implement research of the phone application and came across this as well, as well as some other hidden implementations that are much faster then the public APIs.
  You can try to work with itemsByName, it is also not very fast, according to the number of entries you have.

  Maybe PhoneCallLogID methods can help you?

• Smartphones blackBerry call log shows an incorrect number

  You just bought a Blackberry 8330 with Verizon service, and in the call log, it shows the wrong telephone number in the section "my number."  How can I change it to the correct number for my device?  I already tried the update of the program through Verizon * 228 update with no luck.  Help would be appreciated.

  Thanks for the comments, it has helped point me in the right direction.  I use Verizon's network, so my phone doesn't have a sim card. but, I realized that my phone was not updated correctly after reading your message.  Verizon called and they helped me to go to the program page and manually correct the problem.  Appreciate the info.

• Phone calls showing on the phone of the wife

  So when my wife or I make a phone call, or receive/miss one, it appears on each of the other phones. If I call his iphone 6 and it does not, after I hang up sometimes as a missed call. Same things happen on his phone as well.

  How can I stop this? Never had that until the last big update.

  Stop sharing an ID to iCloud.

• Impossible to center text on incoming phone call screen BlackBerry Storm OS V5.0

  I'm looking to display information on the screen of incoming call on BlackBerry Storm OS v5.0, Info is displayed, but I cannot focus.

  Code is below, pointers would be much appreciated.

          if (PhoneScreen.isSupported())
          {
              PhoneScreen ps = new PhoneScreen(callId, UiApplication.getApplication());
  
              PhoneScreenVerticalManager psvm = new PhoneScreenVerticalManager();
  
              VerticalFieldManager pwvfm = new VerticalFieldManager(Field.USE_ALL_WIDTH);
              HorizontalFieldManager pwhfm = new HorizontalFieldManager(Field.USE_ALL_WIDTH|Field.FIELD_HCENTER);
  
              Bitmap bitmap1 = Bitmap
                      .getBitmapResource("icons/indicator.png");
  
              BitmapField bitField = new BitmapField(bitmap1);
  
              VerticalFieldManager textVfm = new VerticalFieldManager();
  
              LabelField labelField3 = new LabelField("Label3");
              LabelField labelField4 = new LabelField("Label4");
  
              textVfm.add(labelField3);
              textVfm.add(labelField4);
  
              pwhfm.add(bitField);
              pwhfm.add(textVfm);
  
              pwvfm.add(pwhfm);
              psvm.add(pwvfm);
  
              ps.add(psvm);
              ps.sendDataToScreen();
          }
  

  Thanks Peter_Strange,

  I tried your solutions, but could not get to work. Finally I solved the problem with the help of PhoneScreen sample application available for download from the BlackBerry site.

  Although, I would like to add that the solutions you suggested work for a normal screen, but I couldn't make them work with the incoming call screen.

  Concerning