Triangle without the base.

Similar Questions

• problem with the yellow triangle without preventing Internet access

  problem with the yellow triangle without preventing Internet access.in across the network!
  all PC go to the internet through TMG and some computers work very well and most of the computers triangle shows yellow and always go online, but the connection it needs to slow down, I do everything from restarting all switches and install new TMG and always exist and place on another line to outside the firewall problem disappear?
  What can I do :(

  Hello
  I advise you to follow the link below for Tech Net where your social networking question will be answered by IT pros.
  You can post/search here
  hope this helps,
  B Eddie

• without changing the properties of the base image create a substitute image size increase?

  Without changing the properties of the base image, how I create an alternate image effect that increases its size when the cursor hovers over the base image?

  I hope that makes sense!

  RLS

  Simple Image Zoom bootstrap - http://alt-web.com/

  Thumbnail Images

  
  
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/1">
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/2">
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/3">
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/4">
  
  

  CSS:

  .zoom { 
  -webkit-transition: all 0.35s ease-in-out;
  -moz-transition: all 0.35s ease-in-out;
  transition: all 0.35s ease-in-out;
  cursor: -webkit-zoom-in; 
  cursor: -moz-zoom-in; 
  cursor: zoom-in;
}

  .zoom:hover,
  .zoom:active,
  .zoom:focus { 
    /**adjust scale to desired size
    add browser prefixes**/
    -ms-transform: scale(2.5);
  -moz-transform: scale(2.5);
  -webkit-transform: scale(2.5);
  -o-transform: scale(2.5);
  transform: scale(2.5);
  position: relative;
  z-index: 100;
  }

  Nancy O.

• Add more than 2 lines for a select statement without inserting rows in the base table

  Hi all
  
  I have a below a simple select statement that is querying a table.
  
  Select * from STUDY_SCHED_INTERVAL_TEMP
  where STUDY_KEY = 1063;
  
  but here's the situation. As you can see its return 7 ranks. But I must add
  2 rows more... with everything else, default or what exist... except the adding more than 2 lines.
  I can't insert in the base table. I want my results to end incrementing by 2 days in
  measurement_date_Taken on 01-APR-09... so big measurement_date_taken expected to
  end at study_end_Date...
  
  
  
  IS IT STILL POSSIBLE WITHOUT INSERT ROWS IN THE TABLE AND PLAYIHY ALL AROUND WITH
  THE SELECT STATEMENT?
  
  Sorry if this is confusing... I'm on 10.2.0.3
  
  Published by: S2K on August 13, 2009 14:19

  Well, I don't know if this request is as beautiful as my lawn, but seems to work even when ;)
  I used the "simplified" version, but the principle should work for your table, S2K.
  As Frank has already pointed out (and I fell on it while clunging): simply select your already existing lines and union them with the 'missing documents', you calculate the number of days that you are "missing" based on the study_end_date:

  MHO%xe> alter session set nls_date_language='AMERICAN';
  
  Sessie is gewijzigd.
  
  Verstreken: 00:00:00.01
  MHO%xe> with t as ( -- generating your data here, simplified by me due to cat and lawn
    2  select 1063 study_key
    3  ,      to_date('01-MAR-09', 'dd-mon-rr') phase_start_date
    4  ,      to_date('02-MAR-09', 'dd-mon-rr') measurement_date_taken
    5  ,      to_date('01-APR-09', 'dd-mon-rr') study_end_date
    6  from dual union all
    7  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('04-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
    8  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('09-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
    9  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('14-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   10  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('19-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   11  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('23-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   12  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('30-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual
   13  ) -- actual query:
   14  select study_key
   15  ,      phase_start_date
   16  ,      measurement_date_taken
   17  ,      study_end_date
   18  from   t
   19  union all
   20  select study_key
   21  ,      phase_start_date
   22  ,      measurement_date_taken + level -- or rownum
   23  ,      study_end_date
   24  from ( select study_key
   25         ,      phase_start_date
   26         ,      measurement_date_taken
   27         ,      study_end_date
   28         ,      add_up
   29         from (
   30                select study_key
   31                ,      phase_start_date
   32                ,      measurement_date_taken
   33                ,      study_end_date
   34                ,      study_end_date - max(measurement_date_taken) over (partition by study_key
   35                                                                          order by measurement_date_taken ) add_up
   36                ,      lead(measurement_date_taken) over (partition by study_key
   37                                                          order by measurement_date_taken ) last_rec
   38                from   t
   39              )
   40         where last_rec is null
   41       )
   42  where rownum <= add_up
   43  connect by level <= add_up;
  
   STUDY_KEY PHASE_START_DATE    MEASUREMENT_DATE_TA STUDY_END_DATE
  ---------- ------------------- ------------------- -------------------
        1063 01-03-2009 00:00:00 02-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 04-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 09-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 14-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 19-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 23-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 30-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 31-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 01-04-2009 00:00:00 01-04-2009 00:00:00
  
  9 rijen zijn geselecteerd.
  

  Is there a simpler way (in SQL), I hope that others join, and share their ideas/example/thoughts.
  I feel that it is using more resources there.
  But I have to cut the daisies before now, they interfere my 'grass-green-ess";)

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• change the name of the base directory

  How can I change the name of the BASE DIRECTORY? without loss of all files, programs and information.

  IM alredy see this: change the name of the OS X user account and the name of folder on your Mac - Apple Support

  but nothink on the name of the BASE DIRECTORY.

  A user of instant messaging on this MBP and administrator also me.

  Step 2 under Lion or later:

  Go to the folder on the startup disk users. The users folder contains the base folder of the account that you are renaming. Rename the folder for this account, and note the old name and the new name. When you rename the folder, you will be prompted to enter the name administroator and the password that you used to connect.

  But note that you must be logged in as a different user you are trying to rename. So, you will need to create a new account and allow him to administer the computer. Connect to this user and follow the instructions in the link you provided.

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• How to install "Additional language supported" in Windows XP SP3 without the CD?

  I have a valid duly licensed Widows XP SP 3 installed on my PC. I have the product key but that you do not have the Windows XP CD with me. Now when I try to install "Language support additional" icon "Option Regional & language ' in the Control Panel, he asks the Windows XP CD (which I did not). Can anyone tell how I can install Supllemental Language support without the Windows XP CD?

  Hello

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  You can follow the steps listed below, when it prompts for the windows XP CD:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. click Start, click run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  (c) in the component, right-click ServicePackSourcePath, click modify, type %windir%\ServicePackFilesand then click OK.

  If the steps above does not help then you may need to contact the manufacturer of the computer for the Setup disk.

• High-speed router of the provider is located in the basement

  Hello

  I think buying a system of Vonage, unless someone has something better to offer.  My wireless router is in the basement because when Verizon Fios we passed to the fiber is the simplest installation method.  My question is this: with my router in my basement and my phones and faxes and computers all on the third level... Y at - it a device adapter or the phone that is wireless?  If I connect my router in the basement of my phone adapter I can't connect a cable from my phone and fax all the way down here without terring a lot of drywall.

  Does anyone have a solution?

  Thanks in advance for any help you can provide

  Brandon

  Linksys/Cisco equipped with a wireless adapter specially designed to attach to your ATA if you use a Linksys/Cisco ATA...  The WBP54G Wireless-G bridge.  It uses the power of the ATA.  It works, I've used.  Vonage is sometimes used Linksys products.  You can certainly use other providers.

  Fax is sometimes difficult to work with voip little matter how put you in place.

  http://www.Cisco.com/en/us/products/ps10046/index.html

• Can't separate the top cover to the base/motherboard to replace the RTC battery on laptop ZD8080US

  I am trying to replace the RTC on a Pavillion ZD8080US battery.  I proceeded with disassembly in step 11, page 5-33 Maintenanceand Service of Guide.  I am now unable to separate the top cover from the rest of the laptop.

  I can get the left side of the image of the base but even with what appears to be excessive force that I can't get the right separate about 1/4 "without making me concerned that I'll break the cover.   (The right side of the cover is folded about 10 degrees when I'm trying to force it).  I tried some jiggling and a few twists to see if that would open invisible conflicts but with no luck.  I used the tree of a screwdriver between the parties to try to increase the force.  All to nothing does not.

  Coverage seems to be stuck/attached to a 4 "- 5" to the top on the right side.  It acts like a screw that has not been removed.  I don't see anything when I peer into the hole when the two parties are discarded.  Is there any adhesive which can be between the parties on the right side?

  I examined the process of dismantling four times.  I counted the screws that came out.  I revamped to all the screw holes in the drawings and made sure there is no screws in the holes.

  Am I missing something?  Is there a step or a comment has been omitted in the text?  Is there a screw hidden under the model or label of Windows?  Is there one thing that others have found to accomplish this separation?

  I appreciate any help I can get.

  Thanks in advance.

  http://h20574.www2.HP.com/results.htm?SID=434660&MEID=0CB6F826-C110-473D-A294-67807AF06D45

  Here's a direct link to the media library from HP _ make you and signed forwards click the link.

  Give it time to load and select "COVER" in the left column.

  Here is the link to the library as well.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml

  After watching the video, it looks like you missed a few screws. (certainly enough of them _ typical HP)  HP laptops must be 'broken' even if all the screws have been removed, but yours seems to just raise, so it seems that you missed a few screws.

• Is it possible to convert a LWAPP AP without the upgrade tool

  I have a considerable number of access points to convert. All access points are new, so that they have the MIC of Cisco. So I should be able to just TFTP image on access points, but I can't find any info on this.

  It would be much faster for me that I could make dozens of AP at the same time, and I wouldn't have to deal with the upgrade tool quite flaky. Did anyone done this before?

  In fact you can do. The main goal of the upgrade tool is to generate a SSC and add the string SSC to the controller. If you have a microphone, the upgrade tool allows to bypass the process of generation of SSC and executes TFTP. You can telnet to an IOS AP and run

  "archive download-SW tftp://x.x.x.x/c1240-rcvk9w8-tar.123-11.JX1.tar.

  and the IOS AP basis during the restart will load the code base LWAPP, join the controller and improve itself to match the revision of the code of the controller. Now I don't know if this is supported, but your initial question was about the possibility. So yes, that it can be done without the upgrade tool, as long as you have an AP with microphone installed.

  Good luck.

• There must be a way to install 8.1 without the store?

  There must be a way to install 8.1 without using the store?

  I work in a small shop and we're maintenance machines of Windows 8 more every week.

  The only problem is that the store has been incredibly unreliable.  We kept a current to 8 machines directory and a little less than 60% of those that we have had so far this year have experienced problems getting Windows Update to work properly and to get extreme Windows 8.1 download has started and installed.  My colleagues and I have spent countless hours in the workplace and on our personal time trying to find fixes for these issues

  I cannot yet give a complete list of the problems that we had because there is so much to - everything from Windows update not download, 8.1 sitting at 0% for hours or even days in some cases, or the wonderfully useless screen "something happened and cannot complete the installation of Windows 8.1."  I even had one of our business customers bring two and nine in the box, portable identical in design.  We started the update and immediate installation.  The other was sitting on our bench for three days until we could get things

  We have tried everything we can to avoid these problems, but always happens on a daily basis.  Please tell me there is a way for us to upgrade all Windows 8 to 8.1 machines (that's what Microsoft wants, after all, isn't?) and to do so without the store.

  No there is not. Sorry, but Microsoft made the decision to release 8.1 by download from the store window and buy purchase retail only we will not have to like it, but it's the only game in town. Personally I recommend to my family and friends if they have problems to download Windows 8.1 they purchase a full retail copy and do a clean install. This also has the advantage that if you wipe your computer in the future you don't have to be bothered by all these many updates. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• question to set all the parameters of the base area at the same time

  Hi all

  I have a question on the setting of the mode settings to develop.

  According to the literature, we can decrease the parameter (highlight, shadow, white black... etc) in shortcut "+", "-".

  but he didn't set a parameter.

  Can I use hotkey to adjust all the parameters of the base area (exposure, contrast, highlight, shadow black, white), at the same time.

  All the increase or decrease together.

  (DO NOT USE PRESET)

  and how do I do?

  Thank you very much

  Longo

  Click the icon in the shape of triangle to the right of the custom word - see image below.

  

• Mirage does not list the info of the base for certain machines...

  Impossible for the life of me figure out why Mirage does not show what base layer has a machine. It seems random see photo below. When the base coat is not listed, you can apply layers app because the option is grayed out. The only way I can fix it, is to re - allocate a base layer. but isn't ideal...

  I use Mirage 5.6

  

  Hello

  I can only imagine that you have may have removed a CVD and Centraliced the CVD again without choosing a BaseLayer.

  If you do this, then you will get CVDs where no BaseLayer will be shown and then the only way to solve this is really to give the last reused BaseLayer on this device.

  If it appears out of the blue so it's a bug of Mirage and you open a support for this call.

  Timo

• A Version without the cloud of Adobe Reader

  I value my privacy and would never put my information on a cloud, i.e. someone from other servers.  I don't want Adobe Reader DC - I don't want to not Adobe Reader, but I seem to no longer have this option on a day basis.  How can I get a version without the cloud of Adobe Reader?  I tried Adobe Reader DC on one computer, and he had a contextual toolbar very irritating with no way to get rid of him.  I have to go to a non-Adobe reader?

  Hi John,.

  First, its you who decide if you want to save your data in the cloud or not, you can use Acrobat DC and always backup your data on your hard drive or other local storage and it will not be saved on Doc Cloud until you do.

  In addition, we at Adobe are also concerned about the confidentiality of the user and the Doc Adobe cloud data are encrypted and is not shared with third parties.

  If you still want a free version of cloud of Doc, then you can use Adobe Reader XI: http://get.adobe.com/reader/otherversions/

  Kind regards

  Rahul