tried to install snow leopard 10.5.8 but he failed and restarted now, I can't start 10.5.8

Similar Questions

• Three beeps when trying to install snow leopard

  Hey guys, this imac has el capitan, I am trying to reinstall snow leopard but I get 3 beeps. This research, I came across info suggesting either bad ram or I'm going to need at least a 10.6.7 to a flash drive as suggested in this thread here: three beeps when trying to install snow leopard

  I have the original disc from apple with 10.6.3. Possible to use this disc or my only option would be to try to get an OS x 10.6.7 on a USB? If so, I just found the 10.6.7 here: *.

  I have it on my windows desktop. I guess my next step should be to install on a bootable flash drive. So yes, I have a 16 gb flash drive that I use for windows, do I need to reformat for mac first and then copy the dmg file downloaded to it?

  < link published by host >

  You're right, three beeps point to a problem with the RAM. The first thing to do is to remove and reinstall ensure that it is firmly in place. If not, then replace the RAM, if you bought it from Crucial or OWC then the RAM has a lifetime warranty.

• Can I install Snow Leopard on a Mac Mini 2008

  Hello.

  I have a Mac Mini 2008 with the info printed on the envelope:

  Mini Mac 2.53/2X2G/320/SDI/AP/BT

  Model no. A1283 2008

  I tried to install Snow Leopard using the gray installation disc supplied with my Macbook Pro.

  It didn't work, probably because the drive is linked to my MBP (I guess).

  So now I think ordering setup of Snow Leopard on the Apple store instead:
  http://www.Apple.com/shop/product/MC573Z/A/Mac-OS-x-106-Snow-Leopard

  But I'm not 100% sure if the previous failure, I had was really just because of the gray drive or the Mac Mini 2008 does not support Snow Leopard.

  Hope someone can give me the answer, so I'm not an unnecessary purchase.

  Thank you!

  This is because the gray disc is specific to your model of MacBook Pro. Any Mac that has an Intel processor, at least 1 GB of RAM and running 10.4 or 10.5 can run 10.6.

  (141210)

• I am trying to-rInstaller Snow Leopard of Yosemitie. I made a mess of it and now it tells me that it is impossible to disassemble the hard drive

  Can someone tell me how to remove Yosemitie and reinstall Snow Leopard. I made a mess of it. I keep trying to erase the recovery disk, but do not know how. There is no data that I need to keep tro so free it please tell me how to re - install Snow Leopard in the simpleset of simple terms for a person aged 85, can understand it. I am very familiar wih Microsoft and regular of the PC.

  Boot from the Snow Leopard DVD by pressing the C key during a reboot or by holding down the option/Alt during a restart, the DVD. Once started, open utility disk, go to the tab clear, select Mac OS X extended (journaled) format with Option GUID. Erase the hard drive. When you are finished, install Snow Leopard. Once completed, restart normally and set up your account using Setup Assistant. Then use the update from the drop-down list below to update to10.6.8. Run the software update until there is no updates.

  If you want to save some of your existing data, copy what you want an external hard drive before proceeding to the foregoing.

  10.6.8 combo update

• Format and install Snow Leopard on Mac Mini

  Hello

  • I have a Mac Mini
  • Using boot camp, I have a Win10 partition which is now, the entire hard drive.  Really.
  • I have the installation of Mac OS X Snow Leopard (10.6.3) DVD
  • I directly connect the optical drive and a wired keyboard to the system
  • Start by pressing the [CTRL] key.
  • Download the white screen with the Apple logo in the middle of it.
  • .. then nothing.  He's here.  After 10 minutes, I pull the plug and restart the Windows partition and return to the slaughter of these discussion forums for clues.

  Issues related to the:

  1. How do I FORMAT and INSTALL Snow Leopard on the Mac Mini or m, I was too impatient after the [Ctrl] restart using the OS X DVD? 
  2. Is there an external utility that I should get to format the drive?
  3. I can do this in steps - can I install OS X on an external HD and then use it for the crater / rebuild the primary drive?

  Input greatly appreciated!

  Rade

  usually it is booting by pressing the C key to start from the CD-ROM/DVD-ROM drive.

  or start by pressing the Option key to get a list of the bootable devices that you can choose from.

  See <Startup for Mac - Apple Support combinations>

  NOTE: This does not imply that you run your Mac mini Snow Leopard.  I guess that your wording she used to run Snow Leopard, and that your Mac mini still has a DVD/CD player are good signs.

• Re-install Snow Leopard to a notice of Imac I3 mid-2010?

  Hello

  I have already received some good answers in another thread, but it had a different title, so I thought that I post here and maybe some members will more experience with this:

  I just bought a used Imac which is currently being shipped to me.  Here are the specs: mid-2010 21.5 inches screen, model A1311, series: W8114294DAS, Intel Core I3 3.06 ghz processor.

  He will come running to El Capitan, but they advised me to wipe the drive and reinstall the original operating system, which is the snow leopard, and then upgrade from there to El Capitan, with my own Apple ID. However, it seems to be difficult with this particular model. If the computer is initially supplied with Snow Leopard 10.6.4. My drive of detail might not work for the re - install.  I was told that Apple would be able to ship me a custom. I've also read about yet another thread that maybe these models came with a slightly different version of Snow Leopard, and this is why the retail CD may not work, even if the computer came with version 10.6.3. and it would be better to get a custom. Is this true?

  Then there may be a problem with an update of the firmware that the computer may or may not have and which could cause problems (not allow Snow Leopard install at all, or instead to install Lion). Is it possible to say if he had this update and maybe disable it before attempting to erase and install Snow Leopard?

  Does anyone have advice/stories to share before I actually try it? Or what would be the best way to go about this? I thought that I would try my SL CD detail first, and I hope that it will work. Otherwise, I could order the CD on measure and try this one. If I can't erase, at least I didn't damage, but what happens if I erase the disc, but then failed to install Snow Leopard? I was left with a blank computer. Or I would be able to install it once the disc has been erased?

  Someone also said using SuperDuper may erase the disc elsewhere or at least to make a back-up? I have not used before. There is no personal information on the computer again, I would try to re - install before anything else, so I just need a way to install El Capitan under my Apple ID, then I'll be able to install updates, or even a new operating system, as it becomes available.

  Is there a risk to try to use my SL CD detail if it allows me to erase and install (such as the installation of the 'wrong' version of Snow Leopard)?

  Here is the link to the original thread: purchases used Imac tips?

  Thanks for any idea!

  You can try this much easier.

  1 - Connect to App store with your apple ID.

  2 - install download 10.11 - he will say that you have already installed just 10.11 to proceed.

  3. create a usb installation program.

  4 - start the installer - erase hard drive and install a clean copy of 10.11

  5. place the iMac with your apple ID.

  Create an installer for OS X - Apple support bootable

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• Can I install Snow Leopard on my iMac14, 4 (mid-2014)?

  My iMac is running El Capitan, but I absolutely loath it. I wonder if it is possible to install Snow Leopard on this iMac?

  Rob

  N ° it won't execute it. You can not install anything older than what it initially comes with.

• Photosmart C4580 print without wires after installing Snow Leopard

  Hello. I recently installed Snow Leopard on my MacBookPro. Since then, my Photosmart C4580 print wireless. I checked the updates of the software and the message computer read that I was up-to-date so I don't know what to do. Any suggestions?

  Geez-you are a genius! Thank you very much - your solution has functioned perfectly!

• AE CS4 does not open with my install Snow Leopard

  I just finished install Snow Leopard and a new installation of my CS4 Production Studio, everything works accept for AE. It bounces just on the departure of bar, then stops. Nothing more. No idea why?

  Did you day AE version 9.0.2?

• My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.

  My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.  I tried to follow the directions on the site by running the system preparation tool update... did not work.  Then I tried to go back to a restore point and try the update again.  Yet once, didn't. I went back several restore points, but it has always failed.  I don't have an installation DVD, because it came with Vista preloaded.

  Help?

  PaulS22401,
  Walk through the steps described in this article: http://support.microsoft.com/kb/957310

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to install a software that is available, but I get this error error 1330

  Matter of trust ERROR 266 WinVerify

  I am trying to install a software that is available, but I get this error 1330 error message: a file that is requires cannot be installed because the file E:\data1.cab has an invalid digital signature.  This may indicate that the cab file is correct: error 266 was returned by Win check Trust.  The company sent me an another install disc, but the same error message.  Is it matter of certificate authentication if yes, how can I fix.  Thank you

  I am trying to install a software that is available, but I get this error 1330 error message: a file that is requires cannot be installed because the file E:\data1.cab has an invalid digital signature.  This may indicate that the cab file is correct: error 266 was returned by Win check Trust.  The company sent me an another install disc, but the same error message.  Is it matter of certificate authentication if yes, how can I fix.  Thank you

  They should be able to guide you through some sokution for this.

  (The Publisher of the software).

  If you have this update installed:
  http://support.Microsoft.com/kb/978601

  you could try removing it, restart, install this:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29434

  ... restart and then try again to your installation.  Otherwise they may need to view your certificates and remove/install-some manually for their product (if it is supported under Windows XP.)

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• I tried to install a game on my computer, but every time that happens at a certain point it says "file not found".

  I tried to install a game on my computer, but some time during the installation it says "Windows cannot find the file. "Make sure the file exsits and try again. I checked to see if it was compatilbe with my operating system and it has been. What should I do? The game is Lego Star Wars 2 the original trilogy. My computer is Windows Xp.

  Hi Jesusfreakmir123,
   
  -How you try to install the game? It is with the downloaded file or installation disc?
   
  If you try to install the game with the installation disc, copy the contents of the disc to the hard drive and then run the installation and check if the game is installed successfully.
   
  Keep me updated on the status of the issue.

• I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system.

  I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system. good quick response.

  Hello

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.