Tried to install the SP1 for Windows 7 Ultimate 800F0904 error Code

Similar Questions

• Error code 2, while he was trying to install the SP1 for Windows 7

  I downloaded and I try to install the update of security Microsoft .NET Framework 1.1 Service Pack 1 for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2 (KB953297)

  I get an error message 'Code 2' whenever I try to install it.

  I tried to re - download, and I tried to restart my computer.  I keep getting the same message.

  Help?

  Hi Abqblue,

  Welcome to the Microsoft Answers site!

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer.

  You may need to work through more than one of the following methods.

  Method 1: Manually remove and reinstall .NET Framework

  To remove and reinstall .NET Framework manually, follow these steps:

  1. remove the .NET Framework.

  a. click Startand then click Control Panel.

  b. double-click Add or remove programs.

  c. Note each version of the .NET Framework is already installed on the computer. Then, uninstall all versions of the .NET Framework.

  d. When prompted, restart the computer

  Method 2: You can also run a cleaning tool Windows utility to uninstall. Go to the link given below to know how to use a Windows Cleanup Utility tool.

  http://support.Microsoft.com/default.aspx/kb/290301

  Method3: The .NET Framework cleanup tool removes the .NET Framework for you. For more information about how to obtain and use this tool, visit the following MSDN Web site:

  http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx

  (http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx)

  Access the link below to find more information about the steps mentioned above and for the links manually install the .NET Framework

  http://support.Microsoft.com/kb/923100

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Is this the right file to install the SP1 for Windows 7? It starts with 'windows6' - > Windows6. 1 KB976932 - X 64 .exe

  According to this page:

  http://www.Microsoft.com/download/en/details.aspx?ID=5842#instructions
  to install SP1 for but Windows 7 file: Windows6. 1 - KB976932 - X 64 .exe - this application installs Sp1 on a 64-bit computer running Windows 7
  but since it starts with "windows6." I thought it wouldn't hurt to double-check.
  Thank you.
  PS why versions of OEM Windows 7 Ultimate have SP1 on their DVD distribution but apparently does not have the full retail version? At least there is no indication of SP1 is included on the DVD, judging by the name/description of the product at retail.

  Hi lloydmalvern,

  Yes, it's the right link to download Windows 7 Service Pack 1.

  You can see the following article for more information before installing the Service Pack:

  Obtain the latest service pack for your version of Windows

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

   

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

   

  Starting steps to take before installing Windows 7 Service Pack 1 from the Microsoft Download Center

  http://support.Microsoft.com/kb/2505743

  I hope this helps.

• While trying to install the SP1 of Windows, the system hangs.

  We bought Norton Internet Security, but it wouldn't load on our Vista machine.  The tech said it was because she needed to be updated, but when trying to load the service Pack1 (so we can load 2) the computer just keeps freezing.

  Any suggestions on what to do?

  Thank you

  Eliza

  Hello

  How you try to install service pack 1 on your computer?

  Method 1: I suggest that you follow the steps in the link and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 2: Clean boot the computer, and then manually download and install service pack 1 and check if it helps:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Windows Vista Service Pack 1 five language standalone (KB936330)

  http://www.Microsoft.com/download/en/details.aspx?ID=30

  You can also check: Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

• After installing the drivers for windows 7 ultimate, 'Unknown device' is still on my DV7-7003tx?

  I recently installed windows 7 ultimate after formatting the drive. Then downloaded all the drivers from the Web site list. but still a "peripheral Unknows" remain in Device Manager. What could be this driver? I installed Support help, he couldn't do anything either.

  Any help is greatly appreciated

  Thank you

  Right click on the device in Device Manager, click Properties. In the window that opens go to the Details tab, use the menu selector drop down to choose the hardware id. After the first string of numbers you get.

• Error code 800F081F while trying to install the update to windows security

  I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!

  Thank you!

  source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821>

  If the system update tool does not resolve the problem, you will need repair Windows.

  UTC/GMT is 15:34 Wednesday, June 13, 2012

• Update for Windows Vista KB980248: 80070017__ error Code

  I tried to install the update for Windows Vista KB980248 but receive the error Code:80070017

  "There was a similar issue, published with the proposed solution, being (1)" run the Chkdsk.exe too check the drive for errors"and 2" rename the download folder.  The two were not successful.

  I also tried a number of different methods as suggested by MS technical support (see below), but none succeeded, so I hope someone else has also encountered this problem and has a solution.

  The steps I've already done: clean boot. downloaded and installed the update manually; high my privileges as a user profile; Services activated window important; disabled user account control; Run the component tool to reset Windows Update in default; Not Windows Installer and then re-recorded Windows Installer; use the System File Checker. installed the updated system preparation tools.

  Any help appreciated

  After reading the process to carry out a repair for Vista installation, I was not confident I could do given my lack of COMPUTER skills and feared that I would have done something wrong.  But while browsing the site there are other suggestions that I adopted. For example, I downloaded Registry Booster, ran the System File Checker (which I had already done but thought, no harm to do again), and other suggestions are in response to similar questions like mine.  I also ran an another Chk Dsk (I also run this previously).  To restart, as he was driving through the verification process, he said,' windows replaced bad cluster in file name \window\winsxs\x8A9C8~1.226\ 8915cambria.ttc'.  And I was happy, because it was the file you advised has been damaged.  I don't know exactly how it happed, as I said, I had perfomred chk dsk a numer of times before.  I was successfully able to install the update for Window Vista KB980248!  I was so happy after all the anxiety.

  Thank you very much Andrew, for your time, assistance and patience. Very much appreciated.

  What about the King

• Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  Windows 7 Ultimate, tried to install the upgrade of windows 10, now, my computer tells me always that Windows 7 is not an authentic, computer copy for more than a year don't never had a problem before.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• How to install the theme for Windows XP Professional

  How to install the theme for Windows XP Professional?

  Hi Shubham,

  The Microsoft Download Center a lot of themes, or you can use your favorite search engine to search the Web for more themes of third-party websites.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can consult the following articles:

  Make Windows XP as you wish

  Resources to configure desktop themes in Windows XP

  Create your own desktop theme

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  Hello team,

  First and After Effects crashed.

  I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

  I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

  I deleted everything I found CC remaining manually.

  I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  I don't know what to do anymore.

  Could someone help me?

  Virginia

  I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.