Triggers and alarms Weirdness

Similar Questions

• Lost Pack of ringtones and alarms Experia

  Once upon a time, my Z3 was a strong pack with a selection of ringtones and alarms to the choice. Now, it is no more and I don't know how to get it back.
  Uncle google is not useful...

  Hello and welcome to the community!

  If you do not see the ringtones pre-installed, it might be that you have selected the wrong app to choose the ringtone with.

  Go to settings--> Apps--> [menu]-> preferences app Reset and then go to settings-> Sound & notification-> phone ringtone and select the "sound selector" app and see if that helps.

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• Finder of freezing and acting weird

  Hi I had a couple issues Finder weird recently any help would be much appreciated!

  The finder drawing seems to freeze - can I open a folder or a new window of finder and sometimes it will be fine, but then it will be half freeze - the content of the window is not displayed - it will just be white or the background (desktop etc) is drawn in the finder window. I screen shotted because it's a little hard to describe...

  

  It seems to go there I kill finder / restart for 2-5 minutes... then the problem comes back.

  I deleted finder prefs, doesn't seem to help. I did a reboot in recovery mode and ran the repair disc utilities and which seem to help for a few days, but now back!

  I can close the windows in the finder and open new, and the question seems to come and go a little... Any ideas?

  Thank you

  Stuart

  Hello

  Start Safe Mode removes the system caches that can help.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then, try the Finder.

• Pdf in the browser form is not working and look weird

  On the next page, I have a pdf form and it does not work and it looks weird (logo has changed color, button missing, strange looks heading):
  http://www.palomat.dk/files/billeder/palomat/Formular/Bestilling_PALOMATinlinemappe_DK.PDF

  I have checked and it is not only a form of pdf, its forms of pdf that behave strange.

  It's something that started to happened recently and it works fine in IE and Chrome.
  I don't see that the design of the pdf viewer has changed, so I think it might have something to do with the fact that there has been some sort of update of the viewer of pdf in firefox or something?

  Hello, firefox 19 introduced its own Viewer integrated pdf - if you want to switch it to the plugin you used before displaying a PDF file just go to the firefox options > applications and scroll down and set the default action for the portable document (pdf) format.

  View PDF files in Firefox

• Slate 6 songs as a ringtone set ringtones and alarms

  Hello

  I am unable to find an option to set (downloaded on HP plugged music) songs like alarm or ringtone

  Please help if someone faced the same problem and have a solution

  Thanks in advance

  You can set songs as ringtone on the HP Slate voice tab by following the steps below:

  Go to the HP files Manager

  Select and copy the song that you want to set as ringtone

  Go to my storage in HP file manager

  Then go to folder ringtones

  The piece that you copied

  Close file HP Manager

  Now go to settings > sounds > ringtone

  You'll see the song in ringtone list so that you can select it as a ringtone.

• Equium A200-1VO does not start and makes weird noises

  My Toshiba Equium A200-1VO don't load on Windows entirely, which means I can't use it. When you turn everything goes well until the Welcome screen in Windows Vista. From there, it starts to get weird creaking and it beeps from time to time. It won't start here and these sounds do not stop.

  Help please

  Hello

  Is it possible to know where the noise comes from?
  As suggested by above user, it could be a HARD disk, but in this case, it would mean that HARD drive failures and he could die in the next time

  You said it s begin properly until appears the window Vista would be
  So maybe it s only a problem of software but I m still don t know what part of the software would create such sound however, I think that if would not be bad to reinstall the operating system in order to check the notebook with factory settings.

  If this strange question would persist or if you would not be able to reinstall the operating system using the recovery disc then a hardware problem could cause this strange things and I think it means that you will need to contact the ASP in your country for a material test

• Safari crashes and other weird things happening

  Hello, I have a macbook pro retina early 2015 and I noticed some strange things with my mac.

  (also, I'm really sorry, English is not my native language, I probably make many mistakes)

  For two days now, my safari started crashing every day. I found it very strange since I have just my macbook for a month now. When the window opens too warn me and too "send the problem too mac ' there is a white window with nothing in it. I guess now you write what is your problem?

  In addition, whenever I restart the computer in the morning, the sound is disabled. While when I restart my computer the night sound is enabled.

  I also noticed that the morning my update to adobe symbol is too following the wifi so that in the evening its all just disappeared.

  And another thing that I think is weird is that my 'other' in my disk space going 18.2 GB too 18,66 GB no reason apparent. Sometimes it even goes back 18,48 GB and then it go higher still.

  In the months that I have my macbook, I downloaded a program for my wacom tablet, installed Adobe creative suite CS6 installed 2011 of a disc and some powerpoint microsoft word a word documents from the website of my school. also too much yoshimite el Captain went and installed all the updates again. And I installed a very old printer and scanner HP photosmart C3180.

  I do not use wifi, I use the cable. Since I got my mac I never saved my password on it. I put on my firewall and I do not have too use the plug-ins. I also block each pop-up.

  Now at the beginning of this week, I did three stupid thing. Accidentally, I clicked on an ad on youtube mackeeper and also went to the Web site. I clicked on it. (now I see on all the Web sites that support ads advertising of mackeeper. I looked in my business but I have not seen a trial of mackeeper)

  Then then I accidentally typed two websites, I need to search too and both times I came across a site that told me I had a virus. The first pop up led me also a page with my ip address is displayed, and the second was a blank screen. (this happened with Wifi on a different location)

  I click on anything and quit Safari, immediately after I saw him.

  With wifi, I noticed some things had moved too much trash. This consisted mainly of recoverdfiles with WKresouches in them, and I deleted it. Back on the cable there was no recovery file in the trash more

  So, what I have now is amazing. How is it possible that my safari crashes? The other things I mentioned bugs or would it be a malware infection? If it is a malware infection, where should I look too remove it?

  https://www.Malwarebytes.org/antimalware/Mac/

  

• Triggering and simultaneous measures

  Hello world

  I wrote a Vi to acquire data simultaneously from 7 devices. I use cDAQ9178 with NI9203. The vi will acquire current values 4 to 20mA. Could you please check the attached file and let me know if I need to improve.

  I have a question and I would be grateful if someone can help me to answer.

  1. how to open the binary file for writing to the file measured by EXCEL?

  2 is it better to use write on the worksheet for data recording, if yes how to include the time column?

  3. I will use external trigger via the port of PIF0 signal, is it OK to do with dag support? I have not yet tried, but it seems simple?

  4. Finally, I have another vi for the valve which should be triggered with vi as, is their anyway to do it? I was thinking of the authors of the notification, but I don't know how to use ?

  Sorry to ask too I really urgently need all this. I should finish my Tuesday data acquisition system

  Best regards

  In your example above, you have the Setup to write it into a file measure so it renames an existing file. This replaces the file at each iteration. You must change this to add to the file. It's in the "If this file exists' section of the configuration dialog box.

• Simple trigger and alarm Question

  Thanks in advance for your help.

  My situation:

  I have the measurement computing USB DAQ with Labview 8.6 1208FS (ULx using). Am I voltage to a load cell measurement and the need to put in place a range of alarm

  • Load cell by smallload and ramps then begins up to about 15 lbs
  • I would like a continuous display of the data on the chart
  • I need to know if the load went down 15.1 14.9 or overwhelmed below (via two separate front led remains lit if the charge was never out of reach)

  My understanding is that I need some kind of trigger to make the alarm go off like the ramps of load cell up to past 14.9 lbs.

  Phil,

  Given that in a single iteration is reading your data acquisition (read data) an array of values or a waveform, all arithmatic operation will be done on all these values and thus the output of a table or values. In your case you are looking for the trigger condition so I've been chnge the data in table 1 d (easier to treat) and look at the max value and then compare with the threshold so the value out would be an element and not the table of elements.

  flipphil wrote:

  Thank you odessy27,

  I want to be constantly looking at my input voltage and switch to a mode 'on', he spent the trigger threshold.

  • Always begin near 0v and ramp up about 7v comments
  • Once it exceeds a certain trigger level, say 6.95v, I want mainly to 'start' of the program
  • At this point, the VI needed permanently watch entry and turns on an LED if the voltage is less than 6.9v or superior 7.1v.

  The conditions you mentioned can be achieved with the help of another structure within the existing case. Try it and let me know if you find it difficult to implement.

  Nilesh-

• Switch between triggered and untriggered AO: must clear the task each time?

  Hello

  I use August to produce a range of sine values sent several times to help to allow regeneration, with samples finished, that is launched by a trigger. Call it a group.

  One trial involves hundreds of groups. But there are gaps between them where other devices do things. In this gap, I also change the values of the sine table and then restart (awaiting release). I would use just the task Stop and Start Task live for it.

  The complication is that I want the area of OCCUPANCY to a specific value in the gap between the groups, which might not be the last value in the array. I want a way to say: once you have completed the task, do the AO to X sit until you press the trigger to start next. Since I'm on regeneration, I can't just set on the end of the matrix of normal results.

  Is there a way to do this without erasing the task is triggered, creation of a new task untriggered, set the value of the then delete again, creating a new task triggered, ect., hundreds of times she's going around the loop?

  Thank you

  Isaac

  In case anyone else wants to try something similar, you can't actually transition between two tasks, with the same (lines) means using VI DAQmx stop task simply because resources are always reserved.

  Instead, I replaced the task to stop the VI DAQmx control task with action defined as "Cancel". Can I cancel a task, and then start another and so come and go without the need to erase or create tasks every time (the same idea could be used for any number of tasks in the same sense, if I only have two).

  I tested by meassuring the analog output and it seems to work, no error is reported in the code.

• Pavilion 500-321: dark blue background and placement weird icon on jump list (MRU) of applications in the taskbar

  Hi, I recently did a reset of the W8.1 and now I see a weird and very annoying blue backgound dark in the recent files list that appears when you right-click an application pinned to the taskbar. Also, the "PIN to the taskbar" and "close window" icons show little irrelevant and apparently higher than normal

  

  I tried looking through all of the possible settings, but I can't find anything on this particular list. Any ideas?

  Thanks in advance.

  I found out what was causing the problem in this forum. Apparently Windows KB3072318 update caused the jump list to behave strangely. I uninstalled this patch and apparently he himself reinstalled after rebooting, but it's okay now.

• subnets and alarms - FxM / FMS

  Hello

  It is a question of both parties;

  We have a portal that we use FxM and FxV FMS systems to monitor the traffic of users and the application servers.  The FxM I defined a certain number of subnet mask definitions depending on the type of users on our system.  Filter mask Eash can cover several subnets.  Users of type A may be the IP (subnets) ranges and type b users would come over the IP address ranges associated with subnets.  Its all dependent on the range of IP addresses used to access our system and all this seems to work very well.

  I want to try to do is to create an alarm when all traffic on subnets from Type A (through multiple companies) falls below a fixed threshold and the same Type B subnets.  As seen below, each subnet in the FxM definition can include subnet ranges 4-5 - so there would be not bad to try to put in a single rule.   This alarm would indicate that there is a problem of backend associated with servers that process requests user Type A or Type B of separately.

  Subnet 1 for typical business has X:

  124.32.0.0/16
  124.30.0.0/16
  124.31.0.0/16

  Subnet 2 for Type B Company X:

  124.16.0.0/16
  124.17.0.0/16
  124.21.0.0/16

  Subnet 3 for typical business has Y:

  117.39.0.0/16
  117.40.0.0/16
  117.41.0.0/16
  117.45.0.0/16

  Subnet 4 Type B Company Y:

  117.22.0.0/16
  117.26.0.0/16
  117.28.0.0/16
  117.27.0.0/16

  ...

  So my question is this - is there an easy way to do it on the FxM?

  My second question is - the notions of subnets transmitted upward to the FMS or trace the overall traffic on subnets or creating alarms it?

  Thank you

  "mark".

  In the definition of FxM alarms, select your metric to alarm on. I chose the number of downloads for the category called subnets. When you have selected a metric, the alarm setting will allow you to choose regular expressions.

  David Mendoza

• Error ' ' system timer was triggered "and hibernation / sleep problem.

  Original title: Hibernation and sleep problem?

  I bought a new laptop of Toshiba C55 series probably a little a month ago and for a while, it was fine, I had no problem. I had some mistakes with what is called a bad pool header, I've not experienced this once again. My main problem is with the sleep and hibernation. I went and disabled any parameter that would be extended automatically to my computer after a short period of time. It is set at only hibernate after like five hours, I'm never away from him that long. I don't want it to hibernate unless I put it specifically put into hibernation. I heard talking about hibernation is hard on your computer. I am usually only away from him for a couple of hours, so it's easier to have it in sleep so I can come back and get the right to return to work or what I was doing. I put it in mode 'sleep' whenever I need to go away for a few hours, for some time, I had no problem, he would go to the mode standby and stay there until I woke it. My problem is that most of the time when I put it in fashion watches, it goes to the hibernate after only a few minutes. WHY would he do that? And how can I stop it? There are times that I put him to sleep and he done as it should. Most of the time, but it goes to the hibernate after a few minutes. I don't want to make this period. Is there a setting I'm missing, I have conflicting settings on something? What is a small problem with Windows 8, or with my computer itself? The last thing I want to do is to restore it to factory settings and lost all the things that I have saved and have to reinstall my programs again.

  There is also something else showing in my event viewer I've ever seen before. That means when he says "system timer was triggered." And can someone tell me what means the bad pool header error and how to fix it?

  I found a solution, I noticed when I Hibernate the computer at night to go to bed is when it remains not in mode 'sleep'. I stopped it in hibernation at all now and it says in the mode "sleep" very well.

• Backup Tables, triggers and packages/procedures

  Oracle 11.2 and Developer SQL 3.2.

  For the backup of the data, I use OEM/Rman to schedule a backup.  My understanding, these are usually data only (physical backup).

  Now, I want to make the backup of the logic for the tables, packages/procedures and triggers.  I currently use Oracle SQL Developer to export as separate SQL files.

  I wonder if there are any other options to save the tables, procedures and triggers?

  Currently I am guard three types of backups:

  (1) creation of user scripts, role and grant the user privileges.

  (2) tables, packages/procedures and triggers saved via Oracle SQL Developer

  (3) data ora saved through OEM

  Total crash of DB, I'll run the script to create users, role, and grant privileges.  Then log in as an authorized user and run the sql scripts to create the tables, procedures, packages, and triggers; Finally, to recover the data via RMAN.

  Is this a good practice for backup/recovery, or there are ways to do better?

  Thank you.

  Scott

  scottjhn wrote:

  Oracle 11.2 and Developer SQL 3.2.

  For the backup of the data, I use OEM/Rman to schedule a backup.

  Additional OEM backup.

  The backup operation is made by rman.

  My understanding, these are usually data only (physical backup).

  RMAN backup of the physical database.  Technically, it makes copies of data blocks in the data files.  He does not know, nor she cares, that contains a given block.  And this data block "term" is wider than you can imagine.  Consider this: the entire database - tables, indexes, the data dictionary (which itself is nothing more than a collection of tables), stored the DDL, code compiled... everything fits in these data files and data files are all made up of blocks of 'data '.

  Now, I want to make the backup of the logic for the tables, packages/procedures and triggers.  I currently use Oracle SQL Developer to export as separate SQL files.

  I wonder if there are any other options to save the tables, procedures and triggers?

  That's what rman.  backup of tables, procedures, triggers,... everything.

  Currently I am guard three types of backups:

  (1) creation of user scripts, role and grant the user privileges.

  (2) tables, packages/procedures and triggers saved via Oracle SQL Developer

  (3) data ora saved through OEM

  Total crash of DB, I'll run the script to create users, role, and grant privileges.

  DB crash, you want to have a database to run these scripts.  You will FIRST need to restore/recovery database... backups rman.

  Then log in as an authorized user and run the sql scripts to create the tables, procedures, packages and triggers.

  ; You don't have to run all the scripts, because all the tables, procedures/packckages, and triggers will have already been restored by rman when he corrected/restored the database.

  Finally, retrieve the data via RMAN.

  And, precisely, what do you think this means at this point?

  Is this a good practice for backup/recovery, or there are ways to do better?

  There are much better ways.  Especially what you describe will not work.

  You have a serious misunderstanding on what rman is and does.  You need to spend some serious time, read the rman users guide, at https://docs.oracle.com/cd/E11882_01/backup.112/e10642/toc.htm

  And, FWIW, I would NOT recommend depending on the OEM manufacturer to plan backups or perform a recovery.