Triple the screen on Windows Vista problem

Moose title: Triple display problem

I have a laptop Toshiba A505D and I connect a HP 2159 m 21 "LCD monitor on the left side and keep there for a second monitor, I have a hub of Toshiba DynaDock USB which has built in video card that I run a second 21 '' wide LCD monitor Acer to right of the laptop and the laptop in the center of the two to enter. Usually my office remains in the middle (on the screen of the laptop), but lately when I take the laptop home and use (I even put in place it but different monitors) it "confuses" my lap top and now I can't get my laptop to view the screen of the laptop computer, the primary monitor. It maintains show my toolbar of office and down on the monitor of left or right. I tried to change around, disconnect them them and even rebooted my system a couple of times and it won't change. As soon as I plug the monitor HP it will take the Office to this monitor automatically. I put the monitor Acer on the right side, but not the laptop screen.

Any help would be greatly appreciated.

Hello

First of all, make sure that the graphics card you are using is not limited in support of two screens.

You can visit the following links and check if it helps:

Multiple monitors: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

Understanding multiple monitors

http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

Set up multiple monitors

http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

Hope this information is useful.

Tags: Windows

Similar Questions

  • Stripes of green color across the screen on Windows Vista

    Original title: HELP!

    Hello! There is something wrong with my graphic driver, there are green tracer on my screen and I can't play a game at all! What am I supposed to do?

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Update the graphics driver and check if the problem persists.

    Update a hardware driver that is not working properly (Windows Vista)

    Hope this information helps.

  • Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

    The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

    Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

    Acrobat Connect Pro data sheet

    I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

    It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

  • My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

    I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

    How can I keep the "on-screen keyboard" to invite the user every time that I reboot? The system is Windows Vista.

    Please explain what you mean... "incentive"?

    The keyboard screen is not supposed to be enabled when the computer is turned on.

    Here's how to turn off on-screen keyboard:

    http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  • Runnning BACK full screen in Windows Vista

    I try to open and read some of my old school games, but I am unable to get the screen BACK to run full-screen mode.  I have no idea what to do from here.  I think I'm under the 32-bit version of Vista.

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    The problem occurs because the Windows device drivers support all video modes BACK running. Windows device drivers are based on the Mode operating system display driver. You must contact the manufacturer of the driver or display adapter to get help.

    Link for reference: 16-bit command prompt and BACK Some programs won't work in mode full screen in Windows Vista

    http://support.Microsoft.com/kb/926657

    For more information you can visit the link to the forum below.

    http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/043e6633-0799-4fa1-97BF-3f7dfc6885be

    Hope this has helped

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our Microsoft answers feedback Forumand let us know what you think.

  • Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

    No Option to install repair - SAD

    Hello

    Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

    I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

    As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

    Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

    -Todd w.

    "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

    «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

    As Todd, is the answer.

    "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

    Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

    "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

    It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

    If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

    Another possible place you could make suggestions which could see the developers would be:

    https://connect.Microsoft.com/default.aspx

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Blur and expanded text and icons after the connection with Windows vista

    I have windows vista and when I turn on the laptop, the text and icons on the Welcome screen are normal, but after registration on the text and icons become slightly enlarged and fuzzy.  How can I get it back to normal?

    Hello

    There are a number of things to try:

    try going to your graphic card manufacturers site or computer and are looking for the driver download section

    Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

    then try to make the screen of solution of problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

    Change the screen resolution

    __________________________________________________________

    or try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • eror message when I connect a profile of the user of Windows Vista Business Service has no logon.

    eror message when I connect a profile of the user of Windows Vista Business Service has no logon. Failed to load the user profile after wimdows update I have this problem I try safe mode but the gel keyboard, I try F12 boot does not work please, someone came to help me I need my computer for work

    Hello

    as you can not get into safe mode and work within the keyboard freezes in safe mode to do a startup repair disk

    then do a restore of the system of breast

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    and to read this information to try to fix the user profile cannot be loaded problem

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

    I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

    Laptop is a HP Pavilion DV6700.

    Any help would appreciated more than you know.

    The system is Windows Vista 32 bit

    The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

    Hello:

    See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

    Here's how:

    If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

    You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

    Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

    The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

    The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

    When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

    I selected no, make the ISO file.

    It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

    I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

    When you enter the product key, he knows which version of Vista you have.

    http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

    After you install Vista successfully, you can then install the drivers for your PC and driver page support.

    Paul

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • Cannot open all of the games on Windows Vista. A message from frror there is no file association

    All the games that are part of Windows Vista more show this message

    Hello

    Welcome to the community of Windows Vista answers.

    This happens if the IsShortcut registry value for .lnk (shortcut) file is deleted in an attempt to hide the overlay icon in the shortcut. To resolve this problem, re-create the IsShortcut registry value.

    Follow the steps mentioned below to resolve the error message you get.

    1. Click Start, type regedit.exe in the instant search box and press ENTER

    2. navigate to the following key:

    HKEY_CLASSES_ROOT\lnkfile

    3. in the right pane, create a string (REG_SZ) named IsShortcut value.

    4. close the registry editor and restart Windows.

    REGISTRY WARNING

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

    How to run scan SFC

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11 after the scan finished, close the command prompt window reboot the computer and check.

    For more information, see the link below.

    http://support.Microsoft.com/kb/936212

    For more information, you can check the below link as well.

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

    http://support.Microsoft.com/default.aspx/KB/950505

    Let us know if this helps

    Concerning
    Anthony.

  • What is the number of windows vista so I can help

    having computer problems

    What is the number of windows vista so I can help

    The Microsoft technical support number varies depending on your location.

    To contact Microsoft by email, chat or telephone:

    You can also ask your related question Vista here:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista

  • Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

    Is it possible to put in place a wake-up call to the PC/computer Windows Vista laptop? Then, he can wake up in the morning.

    Hello Xltdnbl,

    Thank you for using the Microsoft Windows Vista Forums.  In Windows Vista, there is not a revival on the operating system, but you can add a.  The site below has different types of alarms that can be added.  You can set the alarm to wake up with the sidebar.

    http://Gallery.live.com/liveItemDetail.aspx?Li=354455a7-0b97-42d7-adb1-09aeebee0c46&BT=1

    Please let me know if this was helpful, or if you're still having problems. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Need a product key to activate the upgrade of Windows Vista on my computer

    I have two desktop is Windows XP and the other is Windows Vista, recently updated my Windows XP computer using the discs of resettlement came with my computer Windows Vista, all busy and seems to be a lot of work, but after these last few dates an alert guard arise to request a product key to activate Windows Vista, because it was the disc that came with my computer just in case I had to reinstall Windows Vista there No product key on disk, the continuous alert to appear intefering with my dektop background it won't stay on my screen, how can I get rid of the alert or where I can get the product key?

    Hello

    I think that Windows Vista, which is installed on a computer, is determined only for this computer and cannot be used for another computer.

    If you want to upgrade your second computer with Windows XP in Windows Vista, you must purchase another license, which include a new product key.

    LC

Maybe you are looking for

  • Tecra M5 PTM51E - How can I change the BIOS only with the adapter?

    Hello Sorry for my bad English... I'm trying to update my bios by this filehttp://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090113151143.zip Who fail, the message is:Error the AC adapter is not establish a connection, or battery power is not enoug

  • Re: Installing 2nd hard drive on P305-S8838

    Is it possible to buy another hard drive to my P305? It came with a 320 GB hard drive, and I think I might have a place available for another. Any info would be much appreciated, I was not able to mount all the answers using google.

  • How to activate bluetooth on Satellite P200 Manager - 1C7

    I installed a bluetooth dongle on my Toshiba Satellite P200 - 7 1 so I downloaded the bluetooth Manager and battery bluetooth.Or when I tried to use the bluetooth Manager, he says there's 25-day trial. So I wanted to know how to activate the bluetoot

  • How to re-enable the alert "maximum event log size is reached" Pop up

    How dose you reactivate the alert pop-up that appears when the event log is full? I used to get a popup alert informing me that the newspaper had reached its maximum. size is specified in Console of Managment computer that allows me to save and clear

  • 8600 cut on it when you copy documents of flat

    When copying to flat, the Guide bar stops on 2-3 "from the right edge, thus interrupting the upper part of the doc off the coast.  It copies OK since the charger.  Sometimes restarts when disconnected or turned off, but not always.