Trojan in the HP files - do you recognize these files?
I found 2 Trojan horses using Malwarebytes which seem to be in the files of HP. I ran a few test today and it showed up after I used the HP Support Assistant tools to run the verification of hard disk and video verification. Infected files have been:
program files (x 86) \hewlett packard\hp support framework\resources\hphddcheck\hphddcheck\satahdd_diags.exe
program files (x 86) \hewlett packard\hp support framework\resources\hpvideocheck\d3dim9.dll
I've used these programs today because I got hurt out of sleep and it seemed suspicious. I have Norton analysis in the background, and he doesn't take anything. I found trojan.packer.gen by using Malwarebytes.I have also had some problems with wireless where I disconnected and my network disappears from the list of available networks. I do a repair and he returned, but it's happened several times today.
Does anyone else have these files on their computer? They look like valid files?
I have a new G62-340US HP with Windows 7 64 bit.
I've added support G62-147NR version 5.1.10.7 Configuration file v 2.1
File names and locations are legitimate, my MBAM (v 1.50.1.1100, v5786 of the database) concludes mine to be sure, you to update MBAM before scanning?
My files
satahdd - diags.exe 909 KB (931 384 bytes)
d3dim9.dll 236 KB (241 664 bytes)
dll and exe files are likely to be infected, download them on virus total and it will scan them with several scanners.
Tags: Notebooks
Similar Questions
-
What is select in the option files locked - in right click menu - Wizard for my folders and files
I currently have an option on my files and folders which has the possibility to select locked folders and files assistant locked files.
I already troubleshooted for what was to keep my external hard drive if you look at my history - process Explorer copy lock - and auto runs. I don't know where this option is from-I am in a desperate quest how to get down the option just in case I have lock a file or folder.I'm only a beginner on computer and worried about locking files. I currently can not move files and folders on my computer desk and troubleshooting which.I'll keep researching the question - but what I'm looking at is in the document below:https://SkyDrive.live.com/redir?RESID=7A797BF1CB645296! 1149Hi Melissa,
It seems that a third-party program has been installed on the computer, called The locked files Wizard. I wish to inform you that it is a third-party program and that it has not been published by Microsoft.
I recommend you to uninstall the program immediately.
Method 1: If you want to uninstall the program, I suggest you follow these steps:
a. click the Start button and select Panel.
b. select programs and features in the menu.
c. in the programs and features window, find locked files Wizard of the program in the list of programs.
d. select the option Uninstall. (If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)
e. follow the on-screen instructions to complete the uninstall and then restart the computer if prompted.
Method 2: go to the following link and run the automated troubleshooting utility to uninstall the program.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstallWarning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Please let us know the status of the issue.
-
lost in the collections file associations
I have recently moved some files from my internal drive on my Mac on an external drive to free up space. I don't remember exactly how I moved them - I'm sorry - but I'm almost certain that I moved them in LR. When I moved them to the new drive, I had them moved to a folder parent parent with a different name than the file on the old disk. Before that I did, I also copied them on a different laptop hard drive just in case where something went wrong - I add this because I don't know if this is the cause of the problems with the questions below
When I go to the file in the new player, everything seems fine - as far as I know, all the metadata and develop settings are there.
However, when I try to use Collections to work with pictures of one of the files, I get the "!" in the corner of the cell. So I click on it, then find the file, find, choose it in its new location on the new drive, then I get a message saying that the file is already associated with another photo in the catalog and cannot be associated with a picture. I don't know where the other picture is the question - I see it only on the new drive.
Is it possible to find the other photo - and if so, what I'd do to solve it if I found it?
Also - please let me know if I did something wrong in the first place - most likely - because I want to do this regularly in order to free space and the desire to do it without the headache of this.
Thank you for all the advice!
However, when I try to use Collections to work with pictures of one of the files, I get the "!" in the corner of the cell. So I click on it, then find the file, find, choose it in its new location on the new drive, then I get a message saying that the file is already associated with another photo in the catalog and cannot be associated with a picture. I don't know where the other picture is the question - I see it only on the new drive.
Is it possible to find the other photo - and if so, what I'd do to solve it if I found it?
This is the crux of the problem. You get this message because you have (probably) have uploaded the photo twice, and Lightroom now has a version of the photo of the first importation that is not associated with the actual photo (that's why you get the "!") and a second version of the second importation, which is correctly associated with the photo.
You find these photos in Lightroom. Follow these four steps in order:
1. in the Lightroom library, on the left, under Catalog Module, click all photographs
2 disable all filters (once or twice Ctrl-L)
3. turn off any combination (Photo->-> develop all batteries stacking)
4 search for at least one of these photos by file name using the Lightroom filter bar
You will probably find that the photo appears twice in this search. One of the photos will have edits and metadata provided by the user, and the other won't. You want to keep with the changes and the user-provider metadata, it is likely that with the «!» You want to remove from Lightroom (but), one, and then you should be able to use Lightroom to associate the picture with the "!" in the file.
I would also add that importing photos a second time never solves anything, it usually worsens the problem, as you can see. Never re - import. The best way to move photos to another drive is actually:
- In your operating system, COPY (and not MOVE) the photos to another drive
- In Lightroom, use the command about the location of update for Lightroom folder point to the other drive (it's all explained in detail here, scroll down to the section called "Update folder location")
- When that is complete and working properly, your operating system, delete the photo of the first disc.
-
Original title: songs from ITunes library will not play.
Many of the songs in my ITunes library opening result in the following message: "the song___ could not serve because the original file cannot be found. You want to locate. "When I click on 'Search', none of the files are recognizable and yet does not play the song at the opening.
I know that this isn't a matter of Windows, but some of us are always based on Apple for our music.
Hi Allan_889,Here is an article of Apple Support that you may find useful. Follow the steps in the article and see if you can solve this problem.Note: The steps described in the article may apply to find the files of the song as well.If it doesn't, please post your request in The Forums of Apple Support for assistance. -
I use an old Dell XP Home Edition with SP2 preinstalled. 2 days ago at home, this laptop recognized and connected my network home wireless (802. 11 g Linksys). Today, at work, while sitting next to a wireless router, nothing (Mac Airport Extreme). I use a Belkin Wireless card. I'm not sure of the model of wireless card. Laptop is older and I am afraid to remove the card, but I will if necessary. Belkin Tech offers a WPA Librarians dwnld password to update my XP Op sys. She said that this update would allow my Sys OP to recognize an encrypted router WPA-2, which is how my work router is encrypted.
HI Captben,
The patch file the Belkin tech was referring to can be found here.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
filmmaker does not recognize the MTS files
I use Widows VIsta.
I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file. Can someone help me? Thank you.Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.
-
Windows Media Player-does not recognize the mpeg4 files
My media playes does not recognize the mpeg4 files
I recently had to re - install windows vista, after that everything works well, but when I try to read a MPEG4 file, it gives me an error message that it can't play at this time of the fine. It plays music, mpg3 files fine... I tried to do a 'quickfix' but it didn't work.
Hello
I suggest you to download and install the latest pack of codec for Windows Media Player. Make a search using your favorite for more information search engine.
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.Kind regards
Afzal Taher
Microsoft technical support engineer -
I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?
I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?
======================================
You run Vista Movie Maker 6? Might be interesting to try
Convert MPEG files to WMV format before importing.Or... it may be interesting to try to install Windows Live Movie Maker...
which could be compatible with the MPEG2 files.Windows Live Movie Maker
http://explore.live.com/Windows-Live-Movie-Maker
(There are other applications included in the download...
Uncheck the ones you don't want)Good luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Problems with the .exe file programs + System Restore does not respond when you click
I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!
Hello
See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.
Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
There are MANY varieties of these with many names, but all can be eliminated with the same methods:
Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
scams to get you to pay for them while they have no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows does not recognize the .themepack files
Hello
Microsoft, I downloaded several .themepack files. I have Windows 7 Home Premium (32 bit), and it does not recognize the files. In other words, when I click on the files, they do not open and install.
" Strangely, when I click the .themepack file properties, it says"Opens with"the" Windows Shell common DLL. "Still more strangely, when I go in the file Extensions Manager in Control Panel, the .themepack extension does not appear.
I tried to reboot, etc. Is there a way to fix this? Otherwise, there is a long workaround solution that I can do to get funds from the .themepack file and install it manually?
Hi harpsichord,.
Can you check something:
- Press the Windows key + R > type regedit and press enter
- Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.themepack
- Make sure that there is no key UserChoice (subfolder)
-
Resolution of the image when you place the InDesign file in InDesign
I feel like this is a silly question but I do not know the answer!
If I place an InDesign file that contains a picture in a another InDesign, the resolution of the original image file is kept? For example, if I have an InDesign A5 file, that contains a chart where the ppi effective (because it's been reduced) is 600 dpi, and then I place the entire InDesign file it in another file and EXPAND, what happens to my graph?
Thank you!
I have a document with an InDesign file linked, an area of text that is used in many documents, so interested in this issue.
I did a quick test and it seems to work as it should. I made a smaller file with an image linked and bound the Indesign file in a larger document, and since it is a linked InDesign file it recognizes and displays the image in the links Panel.
-
ColdFusion does not recognize the CSV files
I have a local version of ColdFusion developer 10 on my local machine.
I use ColdFusion to create a CSV file and save it on the server and create a link by using the following code.
Browsers open the CSV file in a text file and I use link right click to save target, my Windows Explorer save a html file.
It works on the other server, using the same code.
I want to know are there any which configuration to set ColdFusion recognize the format of CSV file when saving the target and he lets browsers know how to use Excel to open CSV files.
Your information and help is much appreciated,
Kind regards
Mouses,
< Cfset thisPath = ExpandPath("*.*") >
< cfset f_dir = GetDirectoryFromPath (thisPath) >
< cfset what = "#dateformat (now (), 'mmddyy') ##timeformat (now (), 'hhmm') # .csv" >
< cffile action = "WRITE" line = "" f_dir # # how # ""
output = "MtField1, MyField2" addnewline = "Yes" >
< cfloop query = "#myQuery #" >
< cffile action = "APPEND" file = "" f_dir # # how # ""
output = "Field1 # #, #Field2 # ' addnewline ="Yes">
< / cfloop >
< cfset lelien = "MyServer/report /" & what > »»
< cfoutput > < a href = "#theLink #" > here is the file < /a > < / cfoutput >
< br >
There are several different themes play. I have them separate to make the code more manageable and scalable.
Using your code, I've implemented the following quick test. It uses the embedded, cfartgallery data source, you have also.
I placed the 3 files in the same directory. But this is usually unnecessary because you can pass the path of the directory as a variable.
fileWrter.cfm
Select the city, email
artists
fileDownload.cfm
You must first create the download file.
File.CFC
-
How can I convert .ai files in jpeg format? It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.
I want to continue my membership with Adobe, however, not if it requires some additional software purchase.
For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.
-
6 Lightroom does not recognize the raw files of Nikon D800
I have a nikon D800 and Lightroom does not recognize the raw files yet of this camera. I've updated the LR software to 6.1.1 yet still cannot import files.
Can you help me
Thank you
Ruben
The D800 has been supported since Lightroom 4.1.
You use an earlier version of the Nikon software to transfer files from camera to computer? Older versions are known to make Raw files unreadable by Adobe software.
Try to download a version update of Nikon. Or use a different card for example reader method.
-
Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help
Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.
Maybe you are looking for
-
How can I show the progression of not loading in the lower right corner of the web page?
When I downloaded the first Firefox update, which had no progress bar, I somehow found a way to stop the new progress bar (which shows all the advances in web addresses rather than a progressive bar) to jump around and down to the left or right of th
-
Excel formula does not (ESTNUM, PRODUITMAT)
Hello, I used an excel file that contains formulas which does not work on the numbers and I'm trying to find a way to make it work. It's nice here: = IF (ISNUMBER (ROUND (MMULT (E1, G1), 2)), ROUND (MMULT (E1 + F1, G1), 2),"" ") some research I found
-
What gossipyshe program that I use instead of adobe
What programs to use instead of flash and reader
-
How to make a free software for my laptop newly formatted? In addition to Windows 8.
How to make a free software for my laptop newly formatted? In addition to Windows 8. I have an extended warranty at the dealer where I bought my laptop and do not know if the installation of free software is covered. But I want to do it myself if the
-
Problems installing of printer 1022n w / Windows 7 Enterprise
My workplace has climbed to Windows 7 Enterprise (64-bit), and I'm currently not able to use my HP 1022n printer. I found the site to download the driver 1022n, but to halfway through the installation process I get an error message that the driver is