Trouble getting mobile working in LR CC
I have LR CC running on a Windows 7 computer. I try to get the mobile work in LR CC. When I go to your preferences, and the mobile just need me on the web. I got it in the past, and I still see my old pictures on the tablet.
Thank you
I found the problem. The cloud had closed. I rebooted and everything works fine now. Thanks for your time trying to help me with this problem.
Tags: Photoshop Lightroom
Similar Questions
-
Have a new Mac computer. Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.
How can I get Creative Cloud works on 2nd new computer please?
Hello
Please use the link below to completely remove the creative Cloud Desktop Application.
Using creative cloud | Uninstall the creative cloud desktop application
Hope this will help you.
Kind regards
Hervé Khare
-
Having trouble getting the voice VLAN on the switch X1052P to work at all
Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...
Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.
Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.
I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.
Network administration > VLAN > VLAN static
Network administration > VLAN > Voice VLAN
I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.
This is the short story from where I am now. Any help is greatly appreciated.
FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.
After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.
I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!
SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.
So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.
-
Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless
Bluetooth
Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.
Can not find the necessary drivers
Hello
1 have you tried matching the laptop and the wireless audio link?
2. What is the number of the model of the laptop?
Method 1:
Follow the link below and check if that helps.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Follow the link below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)
I also suggest you to contact the manufacturer to get the required drivers for the device and install it.
http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html
http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3
Automatically get recommended drivers and updates for your hardware
I hope this helps!
-
Out of trouble Getting of track statistics ksh script on opensolaris
Hello
I have trouble getting my own collection stat script to work on opensolaris:
$ pdk/scripts/report-stats.ksh
treatment = 0
twitterq = 0
=====
script:
=====
#! / bin/ksh
Treatment = $(cat /var/tmp/processed-5min.out)
TwitterQ = $(cat /var/tmp/twitter-queries-5min.out)
treated echo = $Processed
echo twitterq = $TwitterQ
====
Rails-stats - plugin.xml:
====
< plugin >
< service name = "I/o Device" >
< config >
< name of option = "script".
Description = "script Collector."
default="PDK/scripts/report-stats.ksh"/ >
< / config >
< name of the filter = 'template '.
value="exec:file=%script%"/ >
< name metric = "availability".
model = "${model}": availability "/ >"
< name metric = 'items processed last 5 Minutes.
category = "FLOW".
model = "${model}: processed" / >
< name metric = "Twitter applications last 5 Minutes.
category = "FLOW".
model = "${model}: twitterq" / >
< / service >
< / plugin >
----
Java $-version
Java version "1.6.0_06".
Java (TM) Platform, Standard Edition for businesses (build 1.6.0_06 - b02)
Java hotspot Server VM (build 10.0 - b22, mixed mode)
Agent appears to be a behavior otherwise.
Pointers are greatly appreciated.
Thank you
/ David
Post edited by: davidkDavid,
pluging looks very good.
You deploy the plugin in the plugins-hq directory and follow the other tips?
http://support.Hyperic.com/display/DOCSHQ32/deploy+pluginMirko
-
I have trouble getting my videos and pictures OF my shared albums. Once I shared them, I can't copy or save on my phone.
After you have shared photos and videos, they are always on your phone, unless you delete them.
-
NB100: How can I get ACPI working under XP
Hello world
I wonder how I can get ACPI working under XP.
When I enable it in the BIOS, Windows will not start... Should I load the drivers during the installation of Windows XP? That would lead me to my next problem, because the command line switch - one for the extraction of the driver does not work... Does not extract the files either.Or y at - there a way to add ACPI to my XP install is already running (the BIOS ACPI option is currently set to "compatibility"?
Thanks in advance!
As far as I know before enabling ACPI in the BIOS, you must remove the standard PC driver in Device Manager and install the ACPI driver.
Then go into the BIOS, turn it on and should start Windows.In the Microsoft Knowledge Base, I found an article on the ACPI Compatibility:
http://support.Microsoft.com/kb/314088 -
My iPhone 4s will fuel not after the iOS put 9.3 to level. What can I do to get it working again?
Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?
You won't lose data by resetting, but it can erase some problems after installing new software or applications.
If this does not work, try to connect in recovery mode, explains in this article:
If your iPhone, iPad, doesn't respond or won't turn on - Apple Support
If it is not the case, the problem could be related to material and the phone must be verified by Apple or an Apple authorized service provider.
Use iTunes to restore your device to factory settings - Support Apple iOS
-
my dvd player reads all movies what do I do to get it working.
my dvd player reads all movies what do I do to get it working.
I had this happen to my DVD player recently. The problem was that the disc I was trying to see it used a copy protection system is not yet implemented by my DVD player. Normally, I don't have the DVD player connected to the network, so he had not received the updates of the firmware since I bought the player. After that I connected it, you download an update of the firmware and I could see the movie.
My recommendation to you is to see if the manufacturer of the DVD drive has an update of the firmware of your player on the website of the company and, if so, has it, then test again.
-
Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep
Hello
1. what exactly is the problem?
2. Why do you think malware are causing this problem?
3. What have you tried in safe mode?Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
How to ask a question
http://support.Microsoft.com/kb/555375 -
Laptop stops playing the video in facebook and have to restart to get it working again?
Laptop stops playing the video in facebook and have to restart to get it working again?
Hello
Try a new installation of the plugin flash/ActiveX as follows.
First, download the Flash uninstall utility on the link below and save it in your downloads folder.
Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller. After this has completed, restart the laptop.
When windows has reloaded, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.
When the installation is complete, restart the laptop.
***************************************************************************
If the above is not correct the problem, try the following.
First of all, download and run the uninstall program of Shockwave on the link below.
http://fpdownload.Macromedia.com/Get/Shockwave/Uninstall/Win/sw_uninstaller.exe
After this has completed, restart the laptop.
When windows has completely recharged, download and install the latest version of Shockwave on the following link.
http://get.Adobe.com/Shockwave/
Once again, after the installation, restart the laptop.
Kind regards
DP - K
-
Kindle fire trouble getting anything to computor transfer
I have trouble getting anything to transfer to my kindle from my computer. can I download games on my kindle also located on my computer?
I'm not a computer genius, I know just enough to get by, I have vista on my laptop and home desktop xp. Please help me and make it easy to understand. Thank you
Hello
(1) are you referring to the Amazon Kindle?
(2) you receive an error message while transferring data from the computer to the kindle?
(3) you are aware of any changes made on the computer before this problem?Refer to this link to support Kindle mentioned below to get help.
http://www.Amazon.com/GP/help/customer/display.html/?nodeID=200127470Hope this information helps. -
When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?
I just downloaded and installed IT - no problem.
Make sure that the firewall is not trying to block it.
-
Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA
Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA
Original title: motorola razomax hd
Hi Bill,
You can read these articles and check if that helps.
How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D
Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device
Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player
For more help.
https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US
Additional information.
Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions
Response with the State of the question and we will be happy to offer you our help.
-
Hello.
I hawe eloquence pc Acer Aspire 5820TG 2 days my webcam no longer works on my Skype account and I can not find hao get it working again, I hawe eawen deleted the account and I tried to reinstall Skype, but still the webcam does not work, any hao suguestions to recower my webcam on my pc?Mr.Kare Krogstad.Check the Device Manager. Click Start and right-click computer. -> Device Manager, click Properties. Look under imaging devices. Right-click the entry for your webcam and click on properties. If it is disabled, you can activate it if there is no lack of material. Also check to see if there is one? or! by the entrance. If so, you need to download a new copy of the driver and reinstall.
Good luck.
Maybe you are looking for
-
Power of Board on NI Elvis II prototyping does not illuminate
After connecting a different prototyping to the Elvis, the power of the prototyping card has stopped working on the Elvis. Even when I reconnect the prototyping card NOR Elvis series to the Elvis he will not work. The LED in the upper right corner of
-
Search for the string in the string table and see the following value in the line
Hi, I'm new I have LV and I do a Vi that read worksheet values and generates 2d channels of the same spreadsheet table. For the moment everything I need is a function that find specyfic string in this table and show the next value in a line. As: Tabl
-
Sound and video malfunction with Windows XP service pack 2
2 problems: (1) after the update of Windows XP Home Edition (service pack 1) for Windows XP service pack 2 (using update windowns - custom) Media Player often has his crush (not smooth) and there is often no image except the sounds and words on the s
-
unsupported operating system does that mean when im trying to install a game
I was downloading a game and when i think that the installation has begun, he said that the operating system could not be supported! How to fix this
-
Extended warranty (Care Pack)
Hey there, I am using laptop HP Pavilion N007ax which was purchased in India ... Warranty of my mobile expires soon... I want to thank my guarantee for two years... is it possible to extend online...? Kind regardsIrene LRI'm not an employee of ch *."