Trouble trying to burn an ISO to 14 items

I have completed and successfully burned a project to a DVD and have just completed the second and am ready to burn an iso image project. I did a preliminary burn successfully two days ago to identify areas that needed changes or improvement. It was finished and I tried to burn an iso image again without success. I used the same settings, for example an AVCHD with content adapted to the available space is TICKING box as I did several days ago, but this time the pop-up "Indexing" happens which suggests the process has started, but nothing happens. I checked my memory, disk space, I restarted the application, and then the computer, but it is still on the screen of indexing with what seems to be no activity e.g. no change to the progress bar, and no sound from the computer to indicate that it is actively working.

Can advise you as to what could be stopping the generation of the image to begin.

See you soon... AndyScreen Shot 2016-01-15 at 2.25.56 PM.png

I would remove all new project and go back to the old, make the changes and burn ISO.

On a side note, I know that the size of the iso is not issue to the problem that you are experiencing right now. Its rather a problem of image quality.

Tags: Premiere

Similar Questions

  • I'm trying to burn a (iso file), but keep a "transcoding error".  I downloand and install the latest updates.  Can anyone help?

    I'm trying to burn a (iso file), but keep a "transcoding error".  I downloand and install the latest updates.  Can anyone help?

    Hi Slim,

    First of all thank you very much for your help.

    I now sort the problem using the AVCHD tab.  I can't that assume that because the original video is of high quality in the program would not burn an iso file to DVD to address normal.  I also had to change the setting from 'Type' to "ISO Image (8.5 GB)" because it would not 4.7 GB.

    Kind regards

    Dave

  • trouble trying to burn an audio cd... I've done it before, but all of a sudden it won't let me.

    When I try to burn a cd, it goes up to 99% complete then says that Windows Media Player has encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged. so, how can ensure me that the burner is connected?

    When I try to burn a cd, it goes up to 99% complete then says that Windows Media Player has encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged. so, how can ensure me that the burner is connected?

    See: -.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-burn-failed-message/92ac0ece-0397-4737-9a6a-d558bc184873

  • Burning an iso file in Windows 7

    I'm trying to burn an iso file with my 6 month old Windows 7 HP Office.  I googled how to make and I shoule be able to right click on the file and in the menu that appears have the ability to burn to disc.  But for some reason any my copy of Windows 7 doesn't have this option.  Why is this?  Also, I read on the site Web of Micorsofts that I should be able to double-click the iso file and it asks where I want to burn to a disc.  But instead he said: he can't open the file.  What is the problem with my Windows 7?  Or am I missing something?

    Jim Allen

    Hello

    My Windows 7 shows that when a right click an ISO file:

    Now please, try:

    Right click an ISO file.

    Select "properties."

    Select 'change '.

    Select "Windows Image Burner Dics;

    If it is not in the list, click Browse and select C:\Windows\System32\isoburn.exe.

    Press 'OK '.

    I hope this helps.

  • Sonic RecordNow is able to burn the .iso Image files?

    I can't believe this. I might be Toshiba Satellite L20 205 is Record now Version 7.31 basic Sonic and has no facility for burning image (ISO format) on my CD/DVD files, unless and and util I move to Deluxe v7.3 for an additional price of $30.

    If this can be true? Save and burn disc button images takes me directly to the upgrade link on the Internet.
    This is the first time I came across an OEM bundled, disc burning trying to strip me for a simple job like burning the .iso files software?
    Am I missing something?

    Hello

    I don t use the sound recording now to make an iso file because I m user of Nero.
    I love this program. But back to Sonic.
    As much as I know Sonic doesn't supports this option. It doesn t create iso files.
    You can use it to create audio CDs from files on your HARD drive, convert audio CDs to MP3, create a Toshiba CD-ROM, CD copy, etc.

    If you want to create iso files, you must use another application like Nero

  • How can I burn an ISO 9660 format disc in windows 7 >

    I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

    I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

    ========================================
    The free ImgBurn is perhaps what you are looking for.

    FWIW... it's always a good idea to create a system
    Restore point before installing software or updates)

    Download ImgBurn:
    http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
    (works on XP, Vista, 7) (to download... left click on the green)
    spot with the white arrow: "Click here to download")
    (The download is: SetupImgBurn_2.5.7.0.exe)

    (During the installation there will be an option to install
    Shortcuts of UniBlue and the "Ask Toolbar"... you can
    you want to deselect those)

    The following tutorials may be worth a visit:

    Also... See the following screenshot:

    Find the 9660 option
    http://i47.Tinypic.com/2qiradw.jpg

    ImgBurn - create the file image from files/folders
    http://grok.LSU.edu/article.aspx?articleid=15771

    How to create an image file of a disc with ImgBurn
    http://Forum.ImgBurn.com/index.php?showtopic=6379

    How to write an image file to a disc with ImgBurn
    http://Forum.ImgBurn.com/index.php?showtopic=61

  • I am trying to burn a dvd folder in again, on a dvd on another mac equipped with a dvd burner...

    I am trying to burn a dvd folder in again, on a dvd, on another mac equipped with a dvd burner...

    Picture quality and sound well when reading. but the picture is not complete SD widescreen. It has back up and down.

    Can someone advise?

    What is the best way to burn? data? film?

    Thanks Rod

    Hi Rod,

    First things first - was your first widescreen sequence? How did you create assets for the DVD? Recommended method is to export from first as 'MPEG-2 DVD' and choose a suitable preset, such as "NTSC DV Widescreen". When that is imported into, there must be big screen automatically. Looks like maybe the DVD that you created is 4:3.

    Regarding the engraving, it is better to export an IMAGE of a reminder, that create a standard .iso (disk image) file that can be burned with any number of third-party programs. I don't know what's available for Mac, there are free applications for PC such as Burn Aware.

    If you use the method of the "record" for some reason, do NOT burn as the 'data' - which will not be a good DVD that will play in set-top DVD players. Result will work on computers. Burning software should have an option to 'DVD Video' and who will properly format it to burn a DVD with appropriate specifications. The .iso method is preferred, because it doesn't work, no games.

    Where do you watch the DVD it shows black bars, what reading device?

    Thank you

    Jeff Pulera

    Safe Harbor computers

  • burn the iso on usb on mac?

    So, I have an iso file, I need to burn on a USB key for use with a windows computer. It's an image iso bootible which can be burned on a usb key. I need to burn it on a usb drive for use with a windows computer. I looked everywhere on the internet for software that can burn an iso image on a USB key on a mac, but have failed. I can not use the command line. I'm blind and use a screen reader to use a computer. I can not use the command line. Does anyone know of a way I can burn an iso file on a USB key without the command line? Is their a program that allows you to burn iso images on a USB on mac os 10 computers third? Thanks in advance

    Hey Stephen again. Any of you have seen my post? No one answered. It's been almost a week and no one has responded to this post. Please find a way to respond to my post to point me at least in the sense of writing in a way I can burn an iso file on a USB key on os 10. I'm now working with a macbook air, in early 2014. I'm on os 10 lcapitan, 10.11.4. Sorry for the spelling mistakes. Thanks in advance

  • I tried to burn a DVD or a Blu - ray on Final Cut Pro 10.2.2

    I tried to burn a DVD on Final Cut Pro 10.2.2 but I find that it always stop the process of engraving in different times. I try a different project on different Macs, some works of time but most of the time stops processing in order to burn! any suggestion?

    Sometimes to replace the image of the menu with a version resized, smaller (height 480) solves this problem.

    Russ

  • Burn the ISO image?

    Hello!

    By any chance is there a program supplied with the new TP T61 (Vista) that allow to burn the ISO image?

    Thank you


  • How to burn an ISO (which is a bootable CD/DVD) to a USB port?

    How to burn an ISO (which is a bootable CD/DVD) to a USB port?

    I usually burn ISO files bootable CD or DVD with NERO6, 7.   Now, I would like to burn on a USB key.

    Ideas on a good and stable program?

    I. - Download the software that makes bootable USB drives the ISO. WinToFlash http://www.bing.com/search?q=+WinToFlash+&form=HPDTDF&pc=HPDTDF&src=IE-SearchBox> and Unetbootin http://www.bing.com/search?q=UNetbootin&form=HPDTDF&pc=HPDTDF&src=IE-SearchBox> are the two options included in the section resources. The software will automatically convert iso files on a USB drive and make it bootable.

    II. - open and install your chosen software. The software will be an installation clicks where pressing a couple of times then you have ready to go.

    III. - Plug the USB and check what drive it is listed as in 'my computer '.

    IV. - Launch your chosen software and specify paths. There will be two sections to choose from. Look for the converted ISO file in the download or the source article. For the second section, select the path or the destination (USB key) is transferred to ISO.

    V. - click 'Next' and let the program create a USB bootable ISO file. It may take some time depending on the size of the ISO file. When the process is finished, you have a bootable USB key with your ISO file.

    UTC/GMT is 05:13 Sunday, December 18, 2011

  • should what software I use to burn the iso file of windows xp?

    should what software I use to burn the iso file of windows xp?

    I like ImgBurn.

  • How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

    Original title: How can I fix C00D199F error code

    Error message when trying to burn a cd with Windows Media Player

    Hello

    1. what version of Windows Media Player do you use?

    2. the specific issue of burning CD using WMP?

    3. What is the exact full error message?

    4. what you are trying to burn?

    5. is the specific question on the disk?

    Method 1: You can run the fixit available in the link below and

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

    Method 2: Clean the disc

    Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

    Select a slower recording speed and check if that helps.

    1. in the Tools menu, click Options, and then click the devices tab.
    2. in devices, double-click the CD burner, and then click the recording tab.
    3. in the write speed list, select a slower speed.

    Method 3:

    Perform the clean boot and check:

     

    http://support.Microsoft.com/kb/310353

    Follow the above article.


    If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

    Reference: Burn your own custom CDs

    Hope the above information is helpful.

  • Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

    Original title: windows media problems
    Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

    If you restart WMP when this problem occurs, which helps?

    It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:

    http://support.Microsoft.com/kb/330135

  • C00D10DA while trying to burn the tracks on a CD with Windows Media Player.

    Original title: C00D10DA - this code message come while trying to burn the tracks on a CD with Windows Media Player. This is not come on any other eponymic in my library

    Hi ceedog,

    Follow the steps in the link below and check the results:

    Windows Media Player Error Message help:http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=8004021B

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • No sound at all with Satellite A215-S7404

    I want to get rid of this resource consuming name VISTA.The task was accomplished with 99% success. The only barrier is the audio driver HD manufacturer that I can't understand.I guess it's Realtek HD Audio, but the driver of it does not at all with

  • DPW missing on settings

    Hello, looking at my settings for USB I see that it is Auto search and underneath is MSC. That's all that shows. I am out of PSG. I think I have a problem here and don't know how to proceed. Yes, it is impossible to force the MSC. Thank you, I'll wai

  • compatibility issue between the windows operating system 7 and NERO 7 ultra edition

    y at - it an easy way to make NERO 7 compatible with windows 7 Thank you

  • Two problems: weak performance and backup of stall

    First problem I have problems with the performance of my computer at the moment.  I may have a virus/malware issue, but I'm not 100% certain.  I ran Norton, analyses, analyses of registry, Ad-Aware, disk cleanup and disk defragmentation.  However, no

  • Kaspersky reports disabled in Action Center

    Original title: cannot depend on the antivirus System and Security Action Center said my protection against viruses (Kapersky anti-virus) is disabled. When I clicked turn on now, he asks me if I want to trust this editor and run the program. I click