trouble with hyperlinks, I did a right click and open to access all links

Similar Questions

• Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

  Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• When I use right click and open in a new tab, how to make the new current tab automatically?

  Whenever I did a right click on a link to open it in a new tab or use the control + left click on a link, the current tab remains active, and you must manually select the new tab to see. Is there a way to change that, without the help of shift + left click to open a new window?

  I know it's a minor inconvenience, but it would be nice if I could make this active new tab automatically.

  Thank you.

  Hello

  Go to Subject: config seek browser.tabs.loadInBackground change to false

  • Subject: config

• Why don't you do right click and open in a new tab, not set the focus on the link more? How can I get that back?

  The question just about everything said. In the past, if I right click on a link and choose open in a new tab when I went back to splash page focus would be on the link. So if I then did a page down it would begin from the link. Now it starts, usually further towards the top of the page, so I end up back on the same thing. I would go back to the way it was, how can I do this?

  Running Firefox version 32.0.2.

  It seems that the culprit was a setting in Tab Mix Plus. In Options > events > tabs > content emphasis during loading non-empty page has not been verified. When checked, Firefox works as expected. At least as expected by me.

• IE-cannot right click and open new tabs

  When I record IE7 under Vista with Captivate 3 - I can't right click on a link on a Web page and open the link in a new tab right click in the window favorite to open the link in a new tab or history does not work either.
  
  Someone has had this problem or knows of her or have any ideas on what I can do about it?

  Hi arlhoolie and welcome to our community

  What about using the keyboard shortcut for a new tab instead? I think it's Ctrl + T.

  Just a thought... Rick

• In the mail app, if I try right click and open the attachments of the JPG files that I received, I get the message 'we are unable to open this file. You want to save and try to open with another application? »

  I received an email with 3 accessories, 2 images and 1 PDF.  I am trying to open larger photos and I get the message, "we are unable to open this file.  You want to save and try to open with another application? »

  Why can't click a picture in the mail app and have it launch a photo viewing application. ?

  What you need to do is to go to control panel > programs > by default of the programs > set your default programs. Or search for programs by default, which must raise I have right as well (just start typing on the splash screen or slide from left to right and click on the search button). Go to the photos and select set this program as default. This fixed it for me.

• Right-click to open the jpg in photoshop disappeard

  Greetings,

  Not sure why the option 'Open with' disappeared while trying to open a jpg or png format in Photoshop cs6.  Scenario - I have photoshop cs6 open a new document, I train.  I go to my bridge and attempt to open a jpg file in photoshop cs6 I want to add to my document.  Previously, I was able to right click and open it directly in photoshop cs6.  However, as I said first of all, the option with a right-click to "open with" for photoshop cs6 is not displayed, but Adobe Illustrator cs6 is still.  Until recently, the open option with photoshop cs6 was always available.  I don't know what I could have done to make the photoshop cs6 option disappear, but it is certainly annoying.  Would appreciate suggestion on to reset this option.

  Thank you

  [Double post removed by Mod]

  Thanks for the screenshot. Return to this window and choose 'Browse '. CONTROL Photoshop CS6: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit), and then select Photoshop.exe...

• I bought an Internet Marketing software it did not work properly Said they (the software vendor), I need to right click and run admin

  software I bought said need icon on the desktop right click and put run admin has never had to do with other software is it too authorization? What are the consequences? should I do?

  Hello

  they are correct

  Some programs will require that you right-click on the setup.exe program and then run as administrator to install the

  and even to run correctly

  This microsoft article should explain

  http://support.Microsoft.com/kb/922708

  Also check vista compatibility

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  If it is not compatible with vista read this

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• When I did a right click on the desktop, click chart options, and then choose Panel fit, he won't go full screen "scale".

  Desktop and personalization

  When I did a right click on the desktop, click chart options, and then choose Panel fit, he won't go full screen "scale". I want to choose "center image", but there to "display full scale.

  I thank very you much in advance!

  Hello

  Referring to the resolution of the screen?

  I suggest you to return the item and check if it helps:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Check the link for more information:

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

• Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

  Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

  Can anyone help?

  Hi Richard,

  1. start Internet Explorer.

  2. Select Tools > Internet Options, and then click the Advanced tab.

  3. check if "enable third-party browser extensions (requires restart)" and click OK.

  4. close all Internet Explorer Windows.

  5 restart Internet Explorer.

  Let us know how it goes.

  You can also check out the following link and see.

  Quick fix | See a PDF on the Web

  Concerning

  Sukrit diallo

• How can I disable the tab appearance totally new tab when I right click to open a new window?

  Whenever I did a right click on a link in Firefox and select "Open Link in New Window", the new window that opens with TWO tabs: a tab containing the target for the clicked link, another 'New tab' tab that contains icons for sites I don't want and don't care. Even more embarrassing, the 'New tab' tab is the tab, which is active/selected when the new window appears, rather than the tab for the link, I clicked.

  It's very annoying and highly undesirable behavior. When you click on a link and choose "Open Link in New Window", we should get a new window that contains ONLY the information that is displayed for the target of the link. We shouldn't receive TWO tabs.

  How can I get rid of this behavior? I looked for a solution via Google but have not found one.

  I hope that the Mozilla team will fix this problem soon. I use Firefox for a long time and have found that it is a very good browser. However, this new behavior has totally destroyed my good feelings about Firefox.

  Thanks for reading my comments.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• cannot open programs by right click and run as administrator

  had a virus earlier today, I think it was the security of windows one... anyway I got rid of it with malwarebytes and restarted my computer. now, for some reason, I can't run programs without going through a right-click and run as an administrator.
  When I try to run normally (left-click) I get this window "open with."
  I'm not very good with technical terms, but I tried several fixes that have failed

  When I right click, open properties, then open the tab compatibility... "run this program as Administrator" button is grayed out so I can't do anything with that.

  turning UAC enabled or disabled dosent seem to do anything.

  Some programs are completely inaccessible, (like microsoft word)

  I also watched regedit but as didemt not a lot of sense to me at all. If anyone could break how to fix this step by step before reinstalling the DVD (which I did not), you will be my best friend

  EDIT: I followed this link of early wich looked like the same, but the link of download in the best masculine seems to not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-open-programs-unless-run-as-administrator/e939ba45-c6ab-499d-AB21-433e7314d344

  Hello

   

  Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Important: Activate security software once everything is done.

  Method 2: When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you follow

• Firefox does not open new tabs whe I right click and ask then?

  Firefox does not open a new tabs when I have so much demand by right click and choose 'new tab '.

  He has always worked until today?

  I was not at work on Monday, so I don't know if that's a problem then.

  There is an incompatibility reported Firefox 3.6.13 with the Ask toolbar. Until Ask resolves the problem, disable or uninstall the Ask toolbar. See:

  • http://support.Mozilla.com/en-us/KB/uninstalling+Add-ons
  • http://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on

• Cannot open files or accessory by double-clicking, should use the right click and select 'Open' to see all attachments or open any document/photo/etc.

  I have all of a sudden, am more able to open anything in my library or by email by double left click on the item.  Now... I have to either save and open by selecting open or simply I am unable to use my computer to see anything which requires the opening.

  What is everything?  How to fix?

  There was a similar... in fact same post in Windows 8... but nobody will suggest reasonable fixes...

  Thanks if you can help...

  Right click, choose 'Open with', and then choose by default, which will fix it so that when you double-click on it uses the one you have chosen.

• I can't open a new folder when I right click and say open a new folder, it says empty

  On my desk if I try to open a new folder by right-clicking and selecting folder everything is empty, even if I go into a folder and right click, he said still cannot open a new folder

  Help, please

  Hi, Brian Craig,.

  What antivirus do you use?

  You can also try the following methods:

  See the following:
  Step 1: SFC scanner on the computer to ensure that the system files are intact:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Step 2:
   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner expire after 10 days.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   
  Step 3:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  If the problem persists, import the following registry key and see if the problem can be solved.

  First of all, please refer to this article (KB) knowledge base to back up the registry key. After you back up the registry, please follow the steps below to import the registry:

  1. click on start, type Notepad in the search bar and ENTER closely.
  2 copy the following commands, and then paste them into the open window of Notepad.

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\CLSID\ {11dbb47c-a525-400b-9e80-a54615a090c0}]

  @= "CLSID_ExecuteFolder".

  [HKEY_CLASSES_ROOT\CLSID\ {11dbb47c-a525-400b-9e80-a54615a090c0} \InProcServer32]
  @= "ExplorerFrame.dll.
  "ThreadingModel"="Apartment".

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Folder]
  @= "Folder".
  "EditFlags" = hex: d2, 03, 00, 00
  "FullDetails"="prop:System.PropGroup.Description; System.ItemNameDisplay; System.ItemType; System.Size ".
  "ThumbnailCutoff" = DWORD: 00000000
  "TileInfo"="prop:System.Title; System.PropGroup.Description; System.ItemType ".

  [HKEY_CLASSES_ROOT\Folder\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  
  [HKEY_CLASSES_ROOT\Folder\shell]

  [HKEY_CLASSES_ROOT\Folder\shell\explore]
  'MultiSelectModel '=' Document '.
  "BrowserFlags" = dword:00000022
  "ExplorerFlags" = dword:00000021

  
  [HKEY_CLASSES_ROOT\Folder\shell\explore\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  
  65,00,20,00, 2f, 00, 73, 00, 65, 00, 70, 00, 61, 00, 72, 00, 61, 00, 74, 00, 65, 00, 2 c, 00, 2f,------.
  00,65,00, 2 c, 00, 2f, 00, 69, 00, 64, 00, 6 c, 00, 69, 00, 73, 00, 74, 00, 2 c, 00, 25, 00, 49, 00,------.
  2 c, 25, 00, 00, 4 c, 00, 00, 00

  "DelegateExecute" = "{11dbb47c-a525-400b-9e80-a54615a090c0}".

  [HKEY_CLASSES_ROOT\Folder\shell\open]
  'MultiSelectModel '=' Document '.
  "BrowserFlags" = dword:00000010
  "ExplorerFlags" = dword:00000012

  
  [HKEY_CLASSES_ROOT\Folder\shell\open\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,20,00, 2f, 00, 73, 00, 65, 00, 70, 00, 61, 00, 72, 00, 61, 00, 74, 00, 65, 00, 2 c, 00, 2f,------.
  00,69,00,64,00 6 c 00, 69, 00, 73, 00, 74, 00, 2 c, 25, 00, 00, 49, 00, 2 c, 25, 00, 00, 4 c, 00,------.
  00.00

  "DelegateExecute" = "{11dbb47c-a525-400b-9e80-a54615a090c0}".

  [HKEY_CLASSES_ROOT\Folder\shellex]

  [HKEY_CLASSES_ROOT\Folder\shellex\ColumnHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\ColumnHandlers\ {F9DB5320-233E-11D1-9F84-707F02C10627}]
  @= "PDF Info column.

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers\BriefcaseMenu]
  @= "{85BBD920-42A0-1069-A2E4-08002B30309D}".

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers\Offline files]
  @= "{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}".

  [HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers\ {a2a9545d-a0c2-42b4-9708-a0b2badd77c8}]

  [HKEY_CLASSES_ROOT\Folder\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\DragDropHandlers\ {BD472F60-27FA-11cf-B8B4-444553540000}]
  @=""

  [HKEY_CLASSES_ROOT\Folder\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Folder\shellex\PropertySheetHandlers\BriefcasePage]
  @= "{85BBD920-42A0-1069-A2E4-08002B30309D}".

  [HKEY_CLASSES_ROOT\Folder\shellex\PropertySheetHandlers\Offline files]
  @= "{7EFA68C6-086B-43e1-A2D2-55A113531240}".

  [HKEY_CLASSES_ROOT\Folder\ShellNew]
  "Directory"=""
  "IconPath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,68,00,65,00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 33, 00, 00, 00
  00.00

  'ItemName"="@shell32.dll,-30396 '.
  'MenuText"="@shell32.dll,-30317 '.
  'NonLFNFileSpec"="@shell32.dll,-30319 '.

  [HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
  'AllDrives '=' '
  "IsFolder"=""
  "AucuneExtension"=""

  3. After you paste the above commands, please click file on the menu, and click Save.
  4 type NewFolder.reg as the file name, choose Save the file to the desktop. Click Save.

  5. go to your desktop and double-click on NewFolder.reg. A dialog box will be pop up saying "are you sure you want to add the information in fix.reg in the registry? Click

  Yes to confirm.
  
  Note: Administrator privileges are required to perform the above steps. When the user account control dialog box appears, please click "continue".

  I hope this helps.