Troubleshooting Keithey 2400

Similar Questions

• I use an IEEE-488 GPIB connection to a keithley 2400

  I use an IEEE-488 GPIB connection to a keithley 2400. I get an error - 111 an error header seperator and a header not defined-113. I need to know how to fix this problem and install this keithley with a probe workstation. I'm new to labview and uses old code that I attached below all information on troubleshooting, the block diagram would be greatly appreciated thanks.

  Why are you using the old code? Go to help > find instrument Drivers. Follow the directions.

• How can I download the driver of network Demension 2400 card

  I have a Dell Dimension 2400 desktop like a second (backup) model. It was terribly slow process and found a Trojan in the restore folder. After many attempts to remove and clean, my last resort was to erase the disc. It worked, but too well. Eventually annihilate my Ethernet card driver. "CNet PRO200WL PCI Fast Ethernet Adapter, version: 1.22.1.208. With my main computer, I searched site Windows drivers, Dell Web site drivers and pilot same site CNET and these attempts, I think I found the good (s) but... .not too sure that I was unable to download for the 2400 via the flash player or burned cd rom. Many errors cannot read the file in a file has not been completely downloaded for simply cannot install as well as others. Is there something else I need to download with the driver for the card as well? I read that there is a kind of disk (CD-ROM) will correct my dilemma, but where can I find this and is there a fee? The two compositions are renovated with no cd installation, and I'm about 75% computer illiterate.
  I need some sort of expertise with this issue, as the hard drive of my main computer is dying and will be a while before I can replace it. I want (need) to get a second model place and running... soon!   Thanks for any input!  8 ^)

  Have you installed the chipset drivers? It is a common mistake. It's here.

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_8D61DA66BF194A41BA9A5341E92EBC31

• I have a Dell Dimension 2400 running windows XP - SP3

  The green power light turns yellow and the computer shuts down.

  http://support.Dell.com/support/eDOCS/systems/dim2400/en/sm_en/index.htm

  Dell 2400 Reference Manual.

  http://support.Dell.com/support/eDOCS/systems/dim2400/en/sm_en/advtshoo.htm

  page with advanced Dell 2400 troubleshooting

  http://www.pctechbytes.com/Dell/Dell-power-button-lights/

  Describes power light stocks and colours.

• My external CD/DVD burner does not work with Dell Dimension 2400 XP

  I have a Dell Dimension 2400 desktop but the CD-ROM supplied with the PC is no longer works it is stock and does not open, this is the reason why I had to buy an external which has the Maxtor 6E040L0 pilot, he worked for a while but don't any more. It is listed in the Device Manager and indicates that the device is working correctly, it is also listed in my computer, in the tag properties indicates it works. What can I do? I am not informed PC and don't have the money to hire a technician. Please, I beg you! Help. Thank you.

  Jose

  Hi JoseCedeno,

  See the following troubleshooting article:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

• ELL Demension 2400-error: No. Hard Drive was found - 0

  I have one of the old Dell Demension 2400-achete nine in October "2003,

  Last week stood up this error on startup: "couldn't find any hard drive - 0 press F2 for set

  F1 to continue. "but he never starts.  and there are two quick beeps after pressing PWR.

  It is on a WIN XP SP 3

  What I've done so far:

  In error, as one of the options was to press F2, I did this and to load or open the BIOS Setup. I did it
  I Look'ed for the HDD in SATA 0, 1, 2, etc...

  Next I Open'ed, for the HDD, the option and check if the startup hard disk is displayed correctly. but there are no options to choose, (I expect said "Western Digital 250 GB" or something.

  At one point, I noticed that there is a CD in the drawer, however, I removed the seasonal and tried aagin and same error message.

  I put in a new hard drive, about a year ago and still have the old HDD
  still somewhere.

  What should I do?

  Thank you

  Computer-Geek

  The Dimension 2400 only natively IDE/EIDE drives, not SATA, unless you have installed a SATA controller card.

  The IDE hard drive is recognized in the installation system [BIOS]?

  The power button LED, green, solid orange, green, orange, flashing flashing or off?

  Check the sequence of the four Diagnostic Lights [marked A, B, C, D] on the rear panel, these are then at the two ports, PS/2 (mouse and keyboard).

  The Dimension 2400 Manual of use, troubleshooting and diagnostic Guide, is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-2400_service%20manual_en-us.PDF
    
  Bev.

• where is the reset button in the troubleshooting information page?

  my firefox is the 42 version and there is no reset button on the troubleshooting information page.

  I searched Bronze help ads appearing on the lower left panel and found articles like this one: https://malwaretips.com/blogs/ads-by-bronze-aid-removal/

  However, I recommend after cleaning first of all the steps in my previous post.

• A few troubleshooting questions

  I have a MacBook Pro (retina, 13 inches, early 2015) that is running OS X El Capitan, Version 10.11.4. I really like to use it, but there are a few questions that I have dealt with recently that I would like help troubleshooting.

  1. sometimes, I look at Netflix while doing other things on the computer. Sometimes my computer fan will speed up until I have to shut down the computer and let it slowly downwards. Is it normal when there are too many used battery power, or the problem can be corrected?

  2. I have an external hard drive WD MyPassport Ultra 1 .5TB, which is set up with my laptop. Lately, I've especially been "Finder" open with it to sort the files it contains. The hard drive seems to work fine, but when I shut down my computer or let it go to sleep with "Finder" open, the following error message appears when I wake up the computer (see image).

  However, even when the message appears, none of the clickable options are actually clickable and just show the loading icon. Instead, I have to force quit 'Finder' and when that finally works, the only option is to force eject the hard drive and plug it back in. (then it works fine except when I let the computer go to sleep, and then the process begins again. What should I do? This doesn't seem to be a problem with the external hard drive or with the computer?

  3. lately my computer has been freezing, usually if it is not always when the Finder is in use (sorting files). It happens at random times, not always. First the cursor freezes / stops moving, then the trackpad doesn't work anymore (do not click). The only solution I've used restarts the computer, which solves the problem, until it happens again (which could be anywhere from 30 minutes to about 3 days later). How can this be repaired?

  4. I also had pop up ads when I'm even not doing anything on the internet (Safari is usually open when he arrives but reduced or hidden). What are these pop-ups? They are bad?

  Sorry for the many questions!

  Thank you!

  < image edited by host to remove personal information >

  S/N redacted

  

• The lightning disappeared from Thunderbird 38.1.0 after an unplanned shutdown. It no longer appears in "troubleshooting information - Extensions.

  Today my computer turns off mode "sleep" (Windows 7). Upon restart, Thunderbird is open to the home page but was insensitive. Thunderbird I closed and re-opened and he now works as usual, but the calendar disappeared. After an advance of another answer, I checked to see if the lightning was on, to find that there is no extensions listed in "troubleshooting information. I have not yet tried to download again. I have important information stored in lightning, so I'd like to get it back as it was.

  Download again. I have no idea where he went, but added again should restore all calendars etc. it contains because they are separated from the add-on.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Some website does not load, I get Yahoo 'Page not found', loads of site Web in Chrome, FF on-site troubleshooting didn't help.

  Nice day

  for about 2 weeks, I get the same error when trying to load a single Web site. The problem only occurs at a site, but not for others. I tried everything in the article of the resolution of problems and things from this forum, but nothing helped.
  I can open the site Web of Google Chrome and Firefox on other PCs.
  The 'error' Yahoo I get is: "the requested URL"http://kissanime.com/"is not found or is not available. Please check the spelling or try again later. »
  Disabling IPv6 does not work either.
  Can someone help me?

  Greetings,
  Waru

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Firefox does not. Have done all troubleshooting but still does not. It will not open again now. Help please.

  After all the troubleshooting suggestions and also uninstall and reinstall Firefox, it won't always work. First it fades and a "does not" review appeared on the letterhead, with the pointer regarding the timer but nothing did. He was recently working fine for ages and I have not added anything, or deleted, so does not understand why he should stop suddenly work.
  I followed all the troubleshooting tips and disabled the plug ins, also removed a lot of the add - ons, did not always work. Then I uninstalled and re-installed.
  Now, it will still not open. A window pops up saying: he's fallen down and giving me the opportunity to re - start or leave. If I click on start, it only re - start.
  I even started it in SafeMode but which will not open either, it opens for about a minute then just closes.
  Please help, I really want to use any other search engine.

  If you have submitted reports of incidents, so thanks for posting the ID of one or more reports of recent incidents that have a prefix 'bp ':

  • BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

  You can find the ID of the status of recent reports of error on the page "help > troubleshooting information" (topic: support).

  • Click on the "All incident reports" button on this page to open the Subject: hangs page and see all incident reports.

  If necessary, you can open on: pages through the address bar.

  See:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter
  • https://support.Mozilla.org/KB/Mozilla+Crash+Reporter

  If you cannot open Firefox, see:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
  • http://KB.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
  • https://developer.Mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

• [waterfox] Using a default profile. No reset button in the troubleshooting information page.

  QUESTION:

  Having a thousand bookmarks affect performance of firefox?

  An add-on would prevent the reset button to appear? (tried to disable (blocking, not the addon) probably guilty, edge of adblock, nothing) safe mode seems to 'disable' the page of troubleshooting for some reason any so couldn't really use that to test.

  I would have posted these but downstairs I noticed side issues tend to be ignored. or at least the way I say them gets ignored them, so here they are.

  As the title says.

  I use only one profile is the default (and not only her name, she is also defined as default value according to the profile.ini).

  According

  http://KB.mozillazine.org/Troubleshooting_Information_page#Reset_Firefox_to_its_default_state

  The only factor would prevent her to appear if I do not use the default profile, which is what I currently have, and it's the only profile I.

  So... what could be preventing it from appearing?

  I'm not on Windows and I am not familiar on what support Waterfox feature and what has been deleted, so you can be better contact Waterfox for support on the problems with the program.

  Of course, you can always use the Profile Manager and create a new profile if that's your only intention and manually copy files to the new profile folder.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I can't find my profile to join the personal dicitonary. Troubleshooting gives me this...

  I need to correct spelling errors in error entered...
  I can't find the custom dictionary...

  You can find your profile to help > troubleshooting information. Look under Application Basics for profile folder and click the button.

• If I try to open troubleshooting information, firefox crashes.

  Firefox crashes when I try to open "of troubleshooting information" under the Help menu. It also blocks on several websites. I have reset firefox, uninstalled and reinstalled, user.js files deleted, renamed the places.sqlite file, turn off hardware acceleration and deleted the sessionstore.js file. Nothing works. How can I fix it? I'm under win 8.1.

  Hello
  Thanks for letting us know about your problem. Have you tried creating a new profile? For instructions on creating a profile, see this article, use the Profile Manager to create and delete profiles Firefox

  For instructions to roll of hanging, see this article Firefox crashes or does not - how to fix.

  Hope this has solved your problem. Please let us know if this problem cannot be solved by above methods.
  Concerning