Troubleshooting of an installation fails to El Capitan on macbook pro

Similar Questions

• Failed to load down El Capitan on MacBook Pro

  I have a MacBook Pro of 2011 and I tried numours times at the bottom of the load OS X EL Capitan, but it can not upload more then 800 MB and it times out because that took almost half a day.  What I am doing wrong, how can I download it?

  Maybe if you say exactly what you are doing we might be able to tell what is the problem then.

• Snow Leopard to El Capitan on Macbook pro 2011

  Hello world

  I run a 2011 Macbook pro under Snow Leopard and need to update to El Capitan because of my iPhone 5 that runs on iOs 9.
  Question?

  Should I upgrade to El Capitan or keep Snow Leopard?
  Is anyone doing this update already on a similar mac?
  I heard that it would be possible to partition the drive and use the two Os x. My concern is that my macbook pro would be slower, it works perfectly fine at the time or perhaps the risk of overheating due to the upgrade?
  And of course, I could lose valuable software like Xpress, my Adobe CS5...

  Sorry for the many questions but I have not found answers on the forum yet.
  Thanks in advance.

  Florian

  (1) keep SL, but use El Capitan on the same drive or on an external boot disk.

  (2) others have, and it is possible.  I did not, but I'm a bit of a killjoy.

  (3A) Yes, it is possible.  I would advise, so you can keep your software that will be useful if - I don't you am not mocking, I understand very well keep working software.

  (3B), it may be a bit slower.  If you have less than 16 GB of RAM (you can run that much) the effect could be a little more pronounced.  If you only have 4 GB of RAM, you need to upgrade RAM first IMO.

  (3 c) don't worry overheating.  Fan CPU/controls is sophisticated enough to keep things working, as long as you do not block the main back-vent.

  Path, you can follow:

  (1A), you can partition using disk utility, but you should have a very good clone/backup before doing just in case a very rare event of bad things.  You also told us not how big your current drive is and how you have used.

  (1B), you could get an external 2.5 drive and I suggest that you get an external Universal connection kit for $15 fix any bare drive.

  (2) you can download the installer from El Capitan, but out of the automatic "starts to install.  Then copy the installation application to another location of re - later use these packs to remove critical package "in-house" at the end of installation.

  (3) If you have a second drive of clone of your current system (my preferred method), you can upgrade this clone, while keeping intact internal drive and startup just externally for iPhone operations.

• Creative Suite CS5 - HAVE blocks with El Capitan on Macbook Pro 2015

  Hello

  I recently "upgraded" from 2006, one to a Macbook Pro 2015. Illustrator Creative Suite CS5, I bought years ago continues to crash when I try to save files, among others. I have read several forums and still do not have an effective solution. I tired: install Java 2015-001, uninstalled, and reinstalled the Creative Suite, renamed the file manager services with '.bak' and nothing works. I'm a graphic designer with the big upcoming deadlines and need of emergency assistance. Please advise! Thank you. Creative Suites Illustrator Download, installation, setting up

  If El Capitan Mac (or the new operating system of Sierra) read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  But... If you have an old program, it is only certified to run with an old operating system

• Question of OpenCL El Capitan with MacBook Pro

  Hello. I gave my MacBook Pro (2014 15 "retina, 7200LE GForce 750) a new installation of El Capitan 10.11. The hard drive has been wiped and I reinstalled OS x from scratch. I tried to use the first with the Open CL GPU acceleration, but all my pause the video snippets like this. It didn't happen with previous OS Yosemite. Changing software of mercury reading only solves the problem, but I would use the Open CL. Any thoughts on how this can be corrected? My MacPro with AMD cards does not exhibit this behavior.

  It is a problem with El Captiain: now turn off hardware MPE.

• Install El Capitan on MacBook Pro early 2011 OS 10.7.5

  Hello!

  My friend has a MacBook Pro running OS 10.7.5 (early 2011). The computer is awfully slow, far worse than my laptop with similar specs that has had upgrades of the OS of the routine.

  Apple says you can upgrade directly to El Capitan of 10.7, but my question to you is, do you think it would be better to:

  (a) to keep the computer as-is and upgrade to El Capitan via the App Store

  (b) factory restore the original OS and then move on to El Capitan via the App Store

  (c) charge El Capitan on an external drive and then install El Capitan to the laptop from the external drive

  (d) another method

  Thanks a ton!

  (I should have noted - there is not any number of files or applications on the computer that must be kept - just a few photos, music and documents that are already stored on an external drive)

• Installation of Photoshop CS4 for 2010 Macbook Pro running Yosemite

  I try to install CS4 my friends Macbook installation diskettes. All the works entry, serial number etc. However when it comes trading drives the OK button will not click! This seems to be a crazy reason incompatible. Anyone know what I am doing wrong?

  Hi Eds26858620,

  Creative Suite 4 is now end of life and we have few resources to offer, as it was never tested on Mac Yosemite, where there may be compatibility problems.

  You can download the Creative Suite 4 from this link: Download Adobe Creative Suite 4 product and try the installation again.

  See also, How to download, install and activate Adobe applications

• Installation of Dreamweaver CS5.5 on MacBook Pro with Yosemite

  My old laptop died and I'm trying to transfer my files to my new laptop.  I have been using Dreamweaver CS5.5 on my old laptop.  It came with a disc for installation.  My new laptop is not a hard drive.  How can I reinstall Dreamweaver CS5.5 on my new laptop computer?

  This question may seem silly to some people, but I really need help.

  Thank you.

  Please follow: Download CS5.5 products

  I hope this helps.

  Thank you

  Varun

• New installation. Fusion 4, the new Macbook Pro, Windows 7 CD, no optical drive

  Problems in library merger creating a new virtual machine. I 'continue without disc', then open the folder where I copied the whole Windows 7 CD (I have no optical drive and my external CD is firewire, which I did not).

  The problem is that the setup.exe is grayed out. I tried this where the CD was on an external HD (connected by USB) and also where the CD has been copied to the laptop HD (after reading some stuff in the forums about the merger not being is not able to read certain files via USB)

  Watched a tutorial and watched a little, but if anyone has the easy answer, would be great.

  I'm afraid that the dvd may have been damaged. I recommend to try with another copy or download the same version in the form of iso, but use your own key.

• Installation of my CS6 on my macbook pro which is not a hard drive?

  How to install the program CS6, I bought on my Macbook pro? It's not a hard drive. I tried to download each version of the trial through creative cloud but then when I try to enter my serial number, he says this isn't a legitimate serial number but is the one who sent me.

  Creative cloud is not going to bind the CS6 software version.  Try instead the next page:

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  If you continue to have problems with your serial number, you must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Installation of Photoshop CS6 on a Macbook Pro

  I just bought the student edition and Professor Photoshop CS6 extended and tried to install it on my Macbook Pro.  I don't see the install.app option only setup.exe.  Outside of my box there only Windows on it but they told me at Best Buy that will also work on my mac.  Is there a version for Mac?

  Yes.

  someone has been shockingly ignorant, dishonest, didn't understand needed a program for mac or simply mistaken and did not really check the box that showed that it was for windows.

  in all cases, you must return the software for a mac version.  (or, better yet, get a refund and download the correct version of adobe: http://store1.adobe.com/cfusion/store/html/index.cfm?event=displayStoreSelector&keyword=ph otoshop_extended)

• MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

  I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

  (1) the DMG files does not open. said hdiutil attach has busy resource failed.

  (2) my Macbook Pro will not stop completely.

  (3) my systems updates install completely. They hit each other between installation (had to force quit)

  ' (4) ' about this Mac ' gets hit when trying to access storage tab.

  Any suggestions?

  Your MBP was working perfectly before the update?

• installation failed for cc, error code: 1 - tried all laptop troubleshooting, new and previously installed before doing a system restore...

  So I'm running a new laptop with 64-bit Windows 8.1.

  I installed creative cloud when I arrived to the laptop and it was fine, no problem!

  I then had to perform a restore of the system because some automatic updates, which caused problems.   Now when I try to install again creative cloud, it downloads and then the second, he starts to try to install, I get the installation failed, error code: 1 message.

  I have tried all troubleshooting, which is to run the Adobe CC cleaning tool, restart the system, download CC, run as administrator, same error code: 1 message.

  I am also running as user administrator so nothing to do with it.

  I have no idea which continues to cause this, have tried everything suggested without success, and the must frustrating, is that once he has actually worked!  My laptop is completely up-to-date with all windows, events, recommended, and optional updates.

  Please can someone help me?

  I really appreciate your answer fast to my query and please don't take this the wrong way, however I stated clearly my opening message that the solutions proposed in the link you sent me in case of problems did not and yet you have sent to me in any case what is frustrating, as I hoped I had taken the time to explain what I had already tried without success as clearly as possible.  Your suggestion to search the forums for other solutions was my last course of action before coming to my last resort to put the request here for expert advice.  I understand that many folk do not do this on the forums so I don't understand your direction here but unfortunately in my case it didn't there no alternative solutions to my problem in the forum.

  Fortunately after hitting my head on the wall for the last 4 hours, I managed to find the solution for me and I want to share it for the sake of others who may be in the same position.

  The problem revolves around turning off the obligation to enter a password when you turn on the computer and enter windows 8.1.  Even if you are still an administrator and car windows of the signs that you, this seems at odds with the Adobe Creative Cloud installation process.

  To remedy the situation:

  Hold the Windows key and press R.

  Type NETPLWIZ and press ok/return.

  Click on the check box besides "users must enter a user name and password to use this computer" to ensure that a tick is visible.

  Now when your restart the computer, you will need to enter your password before windows starts.  Download Adobe CC and install.  Problem solved.

  For what it's worth, I did use the cleaning tool Adobe CC as well before the restart and install but I doubt that this is necessary (and certainly did not help at all until I have reactivated the password on windows starts).

  I'm sure it's just windows being usually a pain and not really for lack of Adobe, but it must be said that I had no such problems with other software downloads and installations to date.

  I hope that is a valuable feedback to Adobe and will help them avoid an unnecessary barrier to new customers who buy their products.  I must admit, I was near you are looking for software elsewhere.

• Adobe CC installation fails

  Hi, I hope someone can help!

  I tried several times to install Adobe CC on my mac, but at the end of installation, I get an error message:

  The Installation failed.

  Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software.

  There is no error number. I tried the cleaning tool and setting up a new admin account and still the same thing happens.

  My colleagues have all used the same facility of downloading, and they all worked very well.

  My mac is a processor 2.7 GHz, iMac intel Core i5 running on OS X El Capitan Version 10.11.5.

  Thank you very much

  Veuileez share the screenshot of the error message. See, FAQ: how to capture and after a video screen or blow?

  Also during this time, try the steps in the following help document: troubleshoot Adobe Creative Cloud install problems with logs.

  Let us know if that helps.

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!