true/false match regardless of case

I want to use the true/false match string node, and I want it to work regardless of case.  For example, in the case of true, I want that it is 'TRUE', 'true', 'True', etc..  I don't want to use the service several times and use a RC.  What is the best way?

Uppercase (or reduce)

Tags: NI Software

Similar Questions

  • LabVIEW 11.0 crashes when you use Match true/false String

    The world is - that sound familiar at all?

    It took a while to find out that LabVIEW block VI (red arrow) is called each time.

    It's weird that the VI is called once and everything works fine.

    In any case, the solution is simply not using this VI, nevertheless this bug should be fixed.

    In my view, LabVIEW 11.0 accidents much more often than older versions...

    I broke it down a bit to the least number of required functions. CAR #360838.

    Workaround as already said: a structure around the last string of true/false game parallel to the length of the string. It could be to disable the diagram, case, image of unique sequence.

    hope this helps,

    Norbert

  • Execution of Code with the participation of true/false

    OK, so I have to be over thinking on how to do it. I'm trying to run some of my code when I get a value of True. If set to False I don't want it to do anything. Ive tried using a true/false case structure, but the obligation to hang the false case something is screwing me. Also tried a while loop, but it simply snaps and never reads the false after his already on.

    Murielle says:

    Very well and I'll check out the tutorials. I just got stupid all this code because I wanted to take the last element of the array and write them on the worksheet without adding other values, BUT at the same time allow him to add to the file because I'll repeat this code on.

    You don't have a table until make you a right there on a single element. There is no 'another value '. There is an element in the table, which is the first and the last element and exactly the same as the value that you used to build the table. Once you do the tutorials, you'll laugh about your code. It is absolutely useless.

  • How to use a signal of true/false dynamics with a business structure?

    Hey everybody-

    Is it possible to enter a case structure dynamic data of true/false?  We try to generate a waveform and want our structure case to run when the wave exceeds a certain threshold value and freeze execution when it drops below the threshold (If false).  However, we want the case structure to run continuous - i.e. If the structure of the deal for the 'real' case running while the waveform is above the threshold, we next want to deal for 'false' structure to run when the wave goes below the threshold, and so on until we stop our program.

    Any suggestions would be much appreciated!

    Rachel

    Remove the loop around your DAQ Assistant vi express (I hate express screws).  There is already a big loop around all of the code in the lower part.  As has been pointed out by Ravens Fan, don't assign continuous acquisition.  Set a finite number of acquisitions.  Then the rest of the code can run and the loop can travel again.

    Get rid of the stop sign at the top.  When the code is finished, Labview will stop on its own.

    You have two stop buttons.  Only one is necessary.  Look at my example posted a few messages back.  A STOP with local variables.

    Shrink your block diagram.  It takes more than one monitor space.  It is difficult to read when you have to scroll all over the place.

  • How to specify "device = true/false" what URL's path and querystring

    e.g. http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxxI have been read many examples on the addition of "device = true/false" or "interface = wifi" based in the current connection service. But all these examples assume that doesn't URL {t have path or from a query string:}

    for example http://myserver.com;device=true

    I need access to a server where the resources are way and I set up via QueryString

    for example http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxx

    I've been adds "device = true" at the end of the URL and at the end of the hostname

    for example http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxx;device=true

    for example http://myserver.com;device=true/path/my.php?id=xxxxxx&name=xxxxxxx

    and none of these works. Is it possible to specify when the URL path and use querystring

    I'm working with JDE Plugin 4.5, Ecliipse 3.4 for Curve 8310 and 9000 "BOLD"

    Thank you

    f

    You always add the connection at the end of the full URL string, regardless of what contains the URL.

    The connection string is stripped by the treatment of Blackberry so that your host be confused by it.  The connectin string is used by the BlackBerry to determine what BlackBerry connection path will be used for the connection.

    BTW, this is '; '. deviceside = true/false", not"peripheral", which could explain part of your problem.

    I think this article explains all the possible connection strings:

    What - in different ways to establish an HTTP connection or socket

    Article number: DB-00396

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

    For more information, I recommend the section required reading of this thread:

    http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  • Scalar true/false conversion

    I would like to convert a transient scalar to a true/false variable.  To clarify, I would take a scalar time-variables and pass the value of the zeroeth little to a true/false variable, which can then be transmitted to a device of digital line out.  The camera has solid state relay and its DAQmx driver requires a contribution from true/false and does NOT have a scalar or digital signal.  It seems to me that it is a very simple c language's intrinsic function call.

    I looked at the functions SE steps-analyze-analog-formula but they always output a different scalar.  Stage outputs triggering a true/false momentarily and do not lock.  Limit test has an output of true or false, but it is for all the samples in the whole of the scalar and not any a scalar value.

    Any suggestions?  or better yet, can someone send a simple vi LV that performs this conversion of simple data?  Is there some utility vi hidden on the somewhere installation disc that can do this?

    Thank you

    I have acquired some clarification and solved my problem through integrated service of SE.  I can do exactly what I need through the 'Alarms' utility that treats momentary boolean True/False step of relaxing in a DIO locked signal on my PXI-6528 board.  Furthermore, I will explore using the result of 'software trigger' the utility of the alarm to work around the limits of the "reserved resource."  Thanks to all that at least looked at my problem.

  • Scan chain with TRUE FALSE and the comma as separator

    Produced cabling 'REAL FAKE' entry as '%s %s' format as false to scan string constants

    the two binary values you want, corresponding to the input string.

    Whereas "TRUE, FALSE" as entry and "%s, %s" format leads to an error.

    I lost a lot of time to understand that the error has its origin in the incompatible separator and not in the way I use this function.

    Wouldn't be possible (ask nicely) to place a note in the online help for this function, you need to use only spaces or tabs as separators
    with chains binary when you use this function?

    It was not clear to me why I should not use the comma as a separator.

    Now, my solution is to replace all the commas with spaces before you wire the input string to scan from a string.

    Is there another workaround solution or someone can provide a deeper understanding of why comma does not work?

    My guess is that he was mistaken for a decimal separator and implies not being part of a binary value.

    Use ' % [^,], %s ' as your specifier.  ' % [^,] "will result in a string up to the next comma.

  • Need to change a true/false to an O or 1 output.

    Need to change a true/false to an O or 1 output. I have a grahical switch that gives me a true/false output. I need an output of 0 or 1.

    Thank you
    Ed

    Take a look inside the Boolean palette on the block diagram.

  • 2.8 LCD screens reset multiple CHOICE and true/false questions

    Multiple CHOICE and true/false questions work fine once only. After that, activity displays all the hidden data. Question must be reset and allow you to select a Merry again. Please I need help to make it work.

    Finally, I solved this problem by:

    1. by changing the Settings.xlm file:
    \lcds\courses\coursename\course\platform\settings\setings.XLM

    2. change false the variable 'assessments_persistResultsInLms '.

  • How to get the lov value(true/false) that is running by pressing the F3 function key

    Hello

    I mapped key F3 function for list of values (lov), pressing F3 on the element of text (with associated lov) poster lov, but here the lov is implicitly run, so I am unable to get the value of lov(true/false), how to get the true or false value from the lov.

    I use Oracle forms 11 GR 2.

    What exactly do you mean by "the true or false value of the lov? Want to know if the user chose something from the lov. If so, you can create a KEY-LISTVAL-trigger on your textitem with something like

    IF SHOW_LOV('THE_NAME_OF_THE_LOV') THEN
      -- do something here
    END IF;
    
  • Variable for a true/false image.visible

    I need a variable to change the visible status true/false for an image.

    It is the short form of my script that does not work.


    var my_Var_Img;

    my_Var_Img = "a1";

    my_Var_Img.visible = false;

    Thank you.

    If you're wondering how to constrain a string to an object (table of use rating).

    for example, if your image of displayobject is a1, use:

    imageS of the var: String = "a1";

    This [imageS] .visible = false;

  • Adobe captivate true/false games television correct score if I click on send then go the next button

    Adobe captivate true/false games television correct score if I click on send then go the next button

    If I go directly to the next button, then I get score 0

    Why is it?

    I'm new in adobe captivate, but I didn't know good tutorial to solve the problem?

    for your better understanding, I give you the link: http://graphicscoder.org/test/quiz/

    I am using captivate 8

    It seems that you don't know how the question slides are set in Captivate. The next button has a dual functionality: during the quiz, it's a Skip button, which means no results at all. It is necessary during the review to avoid blocking of the user on question slides. If you don't provide a review of the quiz, you can get rid of the next key completely. If you provide a review, drag the next under the Clear button button (can be done on the master quiz slides). This way it won't be visible during quiz, but becomes visible during examination where the Clear key is automatically deleted.

    This changed in Captivate 9, but you're still on 8.

    The submission process is a two-step process. If you want to learn more about the design of quizzes, take a look at my post:

    Question Question slides in Captivate - Captivate blog

  • Strange looking for true false question slide

    Hello

    for some reason I now some strange looking for true/false question slides, depending on the image below

    TrueFalseSkew.PNG

    I try to remove all the question slides, and starts again, buit when I insert now any fake slide, he aoppears as above.

    If anyone else has had this problem and if so, how can I solve this...?

    Kind regards

    Sabine

    Go in Edition > Preferences > by default. Here, deselect the Autosize captions.

    Anthony

  • Question about alignments multiple choice or true/false response

    When I insert a questionnaire to multiple choice or true/false question, the second answer (answer B for each type of question, is misaligned with his radio button):

    QuizQuestion2.png

    QuizQuestion.png

    During these questions master blade looks like this:

    QuizQuestion3.png

    I can't understand how to align the answer with its radio button.  Any ideas?

    I use CP 7.0.1.237 on Windows 7.

    Thank you.  I'll go ahead and mark this thread as a response.   I like the feature of automatic resizing of legends, but it messes up the alignment of the answer.

  • Can I change the font for the true/false question?

    I am using Captivate 5. I have a darker background if I want to use the white font for questions. I was able to change the words 'True' and 'False' but cannot change the letter 'A' and 'B' that next to the option buttons. Can anyone help? Thank you!

    Hello

    Here's an alternative to the solution proposed by Whyves if you want to have the same style for true/false questions.

    You can open the object (menu Preferences or SHIFT + F7) Style Manager? Go to Quizzing, legends of the category objects. Choose the answer/FIB text option and change the color and possibly other attributes. All of your answers will now have the new color. If you want to replace the default style of origin for these legends, you can also duplicate the style, change the clone and which apply to such legends.

    The workflow in CP5 is different from previous versions. Personally I think it is a good practice to first choose the appropriate object styles. If you do this before you open a project, modified styles apply to all the project that you create in this session.

    Lilybiri

Maybe you are looking for

  • Hi, do you know the lead time of the pre-release version and firefox real?

    I'm looking for answers to the following questions: 1. is there a pre-release for firefox tester program? 2. How do you get notifications of the pre-release for firefox program? 3 and what is the time between the release of the pre-release program an

  • Satellite A110 - switch WiFi does not work with the new WiFi card

    Hello everyone I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work. New wifi card is discovered and dr

  • Err0r: 0xc0000005

    Name of the failing application: L2.exe, version: 0.0.0.0, time stamp: 0x4c736b12Name of the failed module: TfWah.dll, version: 4.10.12.31, time stamp: 0x4d1d06fdException code: 0xc0000005Offset: 0x0002b4faID of the process failed: 0 x 1074Start time

  • BlackBerry Smartphones is my 9800 locked to O2

    Hi all Ive been looking around the internet, the answer to that, but is not strong evidence that my phone is now free to connect to other networks. Any help or advice would be fantastic. O2 cant/wont help because I can't give them a valid O2 mobile n

  • BlackBerry Smartphones configuration BIS service

    Hello I received my 8310 for personal work, we use a BES server, is there a way I can reconfigure the 8310 to work with BIS?  At present I can receive emails and SMS messages, but cannot respond to emails or surf the internet. Any help would be great