try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

Similar Questions

• Cannot get Windows 7 drivers for Satellite C50-A-1JQ

  I tried to install windows 7 on my C50-A-1JQ as several software packages that I use at work do not work with windows 8. After successfully installing windows 7 I have a list of connected UN-installed in my device manager. Include the Ethernet controller, network controller, PCI controller of encryption/decryption USB 2.0 - CRW. The Toshiba site has only windows 8.1 drivers listed for this model then does that mean that I will be unable to correctly install windows 7?

  Thanks in advance for any help.

  > The Toshiba site has only windows 8.1 drivers listed for this model then does that mean that I will be unable to correctly install windows 7?
  I'm scared, you're right Mr. your laptop model is not supported for Win7, so I think it will be very problematic to find all the right drivers, tools and utilities.

  What should do? Try installing the drivers found by Win7. It would be possible to install the drivers provided for other similar models supported for Win7, but it's not easy to find all the drivers.

  Can you please provide an accurate list of missing drivers?

  For example you have installed driver chipset? If this isn't the case, install the Intel chipset driver.

  By the way: you have created a recovery media before you installed Win7?

• Pavilion dv6: cannot get Windows 10 to work for more than a few days before video fails

  I have a HP Pavilion dv6 with two graphics cards (Mobile Intel (r) Graphics and Raedon (TM) HD 6490 M). I installed the new Windows 10 twice and had a lot of success for about three or four days, then the display did not work. I was able both to restore Windows 7 but I want to take advantage of the free upgrade to Windows 10. Does anyone know of an incompatibility with my HP Pavilion dv6 and 10 Windows?

  It could be windows update tries to give you updates of adapter bad display every time. You have updated automatically whenever you install windows 10? If so, update the manual and ignore all updates that show the AMD, ATI and INTEL. I had the same problem but not with windows 10, I had it on windows 7 and 8.1 with the same computer, I didn't go to http://support.amd.com/en-us/download . Then select the automatically detect and install download and run it. If the screen turns off right after finished installing your drivers, then it must be the war video card causing problems.

  Maybe it's your video drivers are fighting eachother for domination, when the screen messes up, try to hook up an external monitor, if your computer has an additional port. Let us know.

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot get windows 7 sp1 to charge through the installation... then says 'Setup sp fail' changes back

  Cannot get windows 7 sp1 to load either with download or install disk... takes a lot of time then configures up to 99% then says 'default configuration restoration of service pack changes' which can do so he can install

  Hello

  Please, try the steps outlined in the article below and check.

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  I hope this helps.

• Please someone help on how to get windows 7 drivers for compaq nc6220

  I've recently upgraded a laptop (compaq nc6220) to windows 7 and I don't seem to find find windows 7 drivers to run it.

  I need assistance on how to get windows 7 drivers, to drive the foregoing, named mobile.

  Thank you

  Hi brephosa8701,

  Unfortunately the nc6220 doesn't have Windows 7 drivers on the HP.com website, I suggest that you try to use Windows Vista drivers and see if that can solve some problems for you.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=447348&prodTypeId=321957&prodSeriesId=447371&swLang=8&TaskID=135&swEnvOID=2096

• Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. ____

  Cannot get windows media center in windows 7 ultimate 64-bit update as well as digital cable Advisor is displayed. All I have is the not the Gallery library. I tried via tasks > General > auto update > download now and via high cmd.exe cd %SYSTEMROOT%\ehome
  start/wait mcupdate-u

  Uninstalling firewall antivirus and the disabled. Also tried with firewall on and gave the program and full access to the client update. Also tried with windows firewall on and off nothing doesn't work.

  And, now that I'm home and connected to...

  As promised, here are the download links for the DCA Installer:
  x 86: http://go.microsoft.com/fwlink/?LinkId=195559
  x 64: http://go.microsoft.com/fwlink/?LinkId=195560

  Re-reading your first post, I see also (this time) your Extras Gallery is completely absent.  You probably want that, Yes?
  This post to thegreenbutton should help it get there.

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Never managed to get Windows Search to work in XP Service Pack 3, but the Research Assistant works very well.

  Original title: Windows Search

  I've never managed to get Windows Search to work in XP Service Pack 3, but the Search Wizard works fine.  I tried to index the C: drive.  I clicked on 'Rebuild' under Indexiing Options.  The c: drive shows in Indexing Options, excluding some unnecessary subdirectories.  It's all buzzing around for awhile and then says "0 indexed items" and "complete indexing.   I use Norton Internet Security.  What I am doing wrong?

  Hi Victorvan,

  You can uninstall the Search Assistant and check if it helps.

  Check out the following link to uninstall the program:

  How to change or remove a program in Windows XP

• Cannot get windows 10 app upgrade to run

  Hello

  I have a portable extensible original and active running windows 7 Home premium and I cannot get windows 10 app to run.

  I followed KB https://support.microsoft.com/en-us/kb/3081048, got the identity of the package on the two dism/Online/Get-Packages | Findstr 3035583 2952664 and still nothing. After this I run the troubleshooter of GW10appdiagnostic and it comes always freezes in "eligibility verification."

  In addition, potential interest that I got a windows error update on the module "upgrade to Windows 10".

  

  I want to get help and upgrade as soon as POSSIBLE.

  Thank you.

  Hello Madzzz

  I suggest to you that do a manual upgrade using the Windows 10 installation media. That way skip you the step of waiting for the book to come through instantly upgrade to Windows 10. A guide step by step can be found here.

  Hope this suggestion helps you Madzzz

  Yuri

• where can I get windows 7 drivers for the printer, TallyGenicom T9312 Laser stepped

  where can I get windows 7 drivers for the printer, TallyGenicom T9312 Laser stepped

  http://www.tally.com/service/default.aspx?ID=6397

  service and support page, you can send the manufacturer here on your drivers,

  I searched through the site, but is not a list, it is possible that XP is as high as it goes for compatibility.

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• Equium L300 - cannot get Windows 7 webcam drivers

  Hello

  I just upgraded my laptop Equium L300 to windows 7.
  The problem I'm having is, I can't get the webcam drivers.
  I tried vista drivers and I get the camera wizard, then the message

  "Open Webcam driver fail. "Please restart camera or computer ' tried this and still does not work.

  Like anyone else found this and could help you please.

  see you soon
  Omegauk

  Hey Omegauk,

  Can you please tell us which version of Windows 7 (32-bit or 64-bit), you installed this Equium L300 model you have exactly?

  In your case, I'll try a different driver. Currently for Equium L300 no webcam Windows 7 driver available but for similar L300 Satellite you will already find a webcam driver. You should try this one and post your result. Maybe it will work. :)

• Caught a virus. Want to just erase the HD and reinstall. Cannot get Windows original XP discs do. Help?

  Click son on some site that I can download a Trojan horse.  Disabled Malwarebytes and AVG update did not find. Saved that I need and now want to erase the hd and reinstall.  Cannot get computer to read what whatsoever. I myself once in safe mode, but now it tells me that it cannot find a hard disk.  I can refer to boot from the CD drive, but it gives me a blue screen error "cannot find a hard disk. Any help?

  Your computer most likely has SATA drive and the Windows XP installation disc does not include the SATA controller drivers so Setup can not 'see' the hard drive.  You have several options:

  1. to detect the drive, you must use the F6 method to provide the drivers of controller for the installation program, note that when you use the F6 method, the pilots MUST be provided on a diskette, the installation program will not accept the drivers from other media sources.

  Adding third-party or updated during the installation of Windows driver
  Mass storage drivers and the Setup process

  2. you can integrate the drivers into your installation CD:

  http://search.Yahoo.com/search;_ylt=A0oG7nPuhZFO4ikAUghXNyoA?p=slipstream+F6+SATA+drivers&FR2=SFP&FR=YFP-t-501&type_param=

  3. you can go into the BIOS and change the SATA controller in IDE mode and the Windows Installer will be able to detect the drive.  Most of the BIOS have this option is available, if you don't you will need to use option 1 or 2 above.

  John

• Cannot get Windows 7 homegroups to work properly. Double-click a shared library on another machine in the residential group doesn't.

  I just bought a new laptop with Windows 7 on it, so I decided to try the new homegroup in Windows 7 feature.  I activated the homegroup on my desk and apart from the music, photos and videos.  I then joined the residential group with the new portable computer using the password provided by the office shared libraries and the same 3 homegroup.  All appeard to put up correctly, but I can't browse libraries shared each machine to other machine.  I have the Homegroup and click on the other machine and I see 3 libraries, but when I click on any one of them does nothing.  This happens on both machines.   The only way I can get the residential groups to work is to first go to the other machine and provide credentials on the other machine.  After doing this, the homegroup files begin to work.  I was under the impression that the homegroup password was all I had to have access to all shared folders with the homegroup, but the only way I can get the homegroup to work is first authenticate itself to other machine using a user name and password.

  The two machines are configured with the following:

  • Network discovery is enabled
  • File sharing and printer is enabled
  • Public folder sharing is on
  • Streaming Media is on
  • File sharing connections is configured to use 128-bit encryption
  • Password protected sharing is on
  • Homegroup connections is set up to allow Windows to manage.

  I came across this forum because I had the same problem today. Real quickly, I have two laptops, one running windows 7 Home premium 32-bit and the other runs windows 7 Professional 32-bit. I have comcast for my internet provider and their cable modem attached to my belkin wireless router. I don't know if my fix will work for someone else, but it worked for me, so this is.

  1. unplug the router cable modem wireless
  2. connect the router to one of your computers using an ethernet cord
  3. open a web browser and type in the IP address of the router in the Web page bar (as when you type hotmail.com to go check your email). Mine is a belkin so 192.168.2.1 has worked for me.
  4. the control of the router page should open, and one of the options should be to reset factory settings, do this.
  5. DO NOT CONNECT THE ROUTER TO THE CABLE MODEM
  6 configure the router in the same way that you did when you first installed the router, but just to be sure, I used another name for the network
  7. Once you have the password set up and named network you can disconnect the ethernet cable.
  8. connect to the new network without wire of each computer (just like when you connect to a wireless network) choose House (rather than work or public) for the network location.
  9. at this stage my homegroup didn't work, if it is not there for you, you may need to set up the homegroup in Control Panel.
  10. once the residential group is working the way you want to connect the router wireless to the modem cable and check to see if your internet connection is working by opening a web browser and go to any old site
  Hope this helps!
  Cameron

• Pavilion g7-2118nr cannot get the wifi to work

  so I'm a 2118nr Pavilion g7 and I reinstalled windows 7 because I'm not a fan of Windows 8 what so ever. While I did the install, I was able to get all the drivers, but the wifi. I changed the default bios, that did not work. Haven't installed the wizard Hp no help either. I'm able to ride on the only threw ethernet but this is a laptop not a desktop computer, so it's not suitable for me if anyone can please help I would be very happy.

  Try this one...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_123191_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken