Try to burn a CD. The system will not recognize the blank disc or let me burn__

Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

Hello

Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

If no joy:

Please make all below even if you have done some before as it is often the set of operations which solves
the question.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

Hope these helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Can my cd-r/dvd will not recognize a blank cd to burn,.

    My cd-r/dvd player will not recognize a blank cd to burn. It will play DVDs and CDs store bought and even burn but when I try to burn one he repeats to me enter a blank cd. that I am using that is empty, I can burn one on my other computer and the game is on a fine, one I have a problem with a dell inspiron 1500.

    Hello Danielbullock29,

    Thank you for your message.  In some cases, the burners will not burn a specific brand or batch of CD/DVD.  Try a different brand and let us know the result.
    We can't wait to hear back on your part.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows does not recognize a blank disc in the DVD player.

    When you try to burn a CD and have a blank CD - R into the DVD player, I get 'Windows cannot read the disk in drive D ". I tried other discs and DVD, but it seems that Windows does not recognize a blank disc. I have another DVD drive and the same is true here as well.  I tried to update the drivers and deactivation and reactivation of readers but nothing is done. However, CDs or DVDs with the content are recognized.

    I had the same problem on Windows 7 32-bit (suspect this fix as well under Vista). After trying everything under the Sun entered Services (search for programs and files, type 'Services') and looked "Shell Hardware Detection. Found that it was disabled (not sure how he got that way). Right-click on it to get the properties. Change startup type to "Automatic", press apply then OK. Problem solved without even having to restart!

  • error 800024002 when you try to put up-to-date. system will not accept download powershell. get 0 x 4002 error and the basic error "problem occurred and will leave the download.

    Have HP Pavilion a6110n and windows Vista editions Home premium.  A reboot from recovery disc and Noah update will not work. System has also disabled the netgear router and killed a comcast modem. I think I need computer trash HP 6110.

    Hello

    Repair windows files, to do this, perform an inplace upgrade which would help.
  • cannot burn CDs, insert the blank disc rpet

    I continue to insert a blank disc, but it will not burn

    Hello

    I suggest that you follow the steps in these links and check if the problem persists.

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - click on Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

  • My system will not recognize the update 15.1

    I'm working on a series of systems, some with Maverick, some with El Capitan and Yosemite. Most of my systems easily set updated to 15.1 while others (not having nothing in common with one another) don't see 15.1 as an update. What gives?

    Hey Brock,

    Here is the direct link where you can download new updates of all creative applications Cloud 2015 for Windows and Mac OS.

    Please do not forget to follow the "important Instructions" on the page (required by Adobe) for direct links work.

    2015 all updates of Adobe CC: directly download for Mac OS links | ProDesignTools

    2015 all updates of Adobe CC: Direct for Windows download links | ProDesignTools

    Kind regards

    Navdeep Pandey

  • Satellite L - CD/DVD player will not recognize a blank BD disc

    My CARPET * A BD - CMB UJ141EL won't regonise a blank bd disk?

    Hi psykes58,

    You can also publish more information on your laptop model and operating system? A sentence is very short, what do you think? ;)

    In addition, it would be interesting to know if this drive was preinstalled or an upgrade of the road.

    It also happens with CDs and DVDs?

  • Windows 7 will not recognize driver for HP Scanjet 5370c scanner

    I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

    Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

    Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

    http://www.Hamrick.com/

  • I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

    Original title: I can not burn CD

    I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

    Hello

    1. have you tried using different CD and check?
    2. were you able to burn CDs without any problem earlier?
    3. have you made changes on the computer before this problem?

    The hotfix in the following article might help you.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  • I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

    I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

    Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

    Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

    What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

    Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

  • windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

    system will not start, I have not connection wired, software was on the laptop at the time of purchase.

    Hello

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

    I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

    Hello SteveO_1968,

    To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

    1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
    2. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
    4. Click repair your computer.
    5. Click the operating system you want to repair, and then click Next.
    6. In the System Recovery Options dialog box, click command prompt.
    7. Type Bootrec.exe, and then press ENTER.

    Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

    Bootrec.exe options

    The Bootrec.exe tool supports the following options. Use the option that suits your situation.

    Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

    • bcdedit/export C:\BCD_Backup
    • c:
    • Boot CD
    • BCD attrib s h - r
    • Ren c:\boot\bcd BCD.old
    • Bootrec /RebuildBcd

    / FixMbr

    The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

    / FixBoot

    The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

    • The boot sector has been replaced by a non-standard Windows Vista boot sector.
    • The boot sector is damaged.
    • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

    / ScanOs

    The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

    / RebuildBcd

    The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • I know that my Admin password but the system will not accept

    Today, I changed my Standard user password and now the system does not recognize my existing Admin password.  I did not define another Admin account.  What can I do to fix this?

    I did not define another Admin account.  What can I do to fix this?

    A fully tested alternative admin account is just like a spare House key. Those who did not catch sooner or later...

    1. Ask a friend to burn a CD repair system for you.
    2. Use this CD to start the machine in Repair Mode.
    3. Use system restore to restore Windows to a point before play you with your accounts.
  • During the installation of Photoshop CC (2015), I get the following error "update failed, corrupted download, try to download again (U43M1D204).»  It will not download again, how to download?

    During the installation of Photoshop CC (2015), I get the following error "update failed, corrupted download, try to download again (U43M1D204).»  It will not download again, how to download?

    Error 201 & 205 & 206 & 207 or several U43 errors

    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Maybe you are looking for

  • How to open on the phone sim card?

    Can you give me info on how to open SIM card on an iPhone 6?

  • Lost bootcamp partition

    As he tried to resize my partition bootcamp (and then removal of partition of the said) my worked before Windows partition will be is no longer visible on the startup disk selection screen. I read through some forums for similar problems, but none of

  • Microsoft Word can't open .docx files not

    I just installed El Capitan on my iMac 927-INCHES, mid YEAR 2011).  Files Word (.docx) made previously will not be open.  They report the error: If I open a file empty and save it as a .docx, it opens fine.   There seems to be an incompatibility with

  • Wireless Mobile mouse: 6000 does not?

    Wireless Mobile Mouse 6000 PDC, there was already a given solution to get them to work?  I have ensured that the proper drivers are downloaded, there are new batteries and so on.

  • MAC / PC ACCESS

    MY OLD ROUTER WRT54G IS CURRENTLY PROVIDING THE SERVICE TO MY MAC, AND HE DID A GREAT JOB.  THERE ARE A FEW PC ONLY APPS, I WOULD ALSO LIKE TO USE SO I THINK ABOUT BUYING A PC.  CAN I ACCESS A PC AND A MAC WITH THE HELP OF THIS ROUTER?  IF SO, DO I H