Try to burn a mix cd but does not burn. Help, please

I tried to burn songs to a cd and I know there is enough space for all of them but then whenever I have burn, he ends up 30% to 78% finished and says it can not burn the cd any longer and the CD do not work in any cd player or my own computer now I wonder why it won't let me burn.  The error report always says that the burner is busy, even if it burns only one of the disks.  What should I do?

I tried to burn songs to a cd and I know there is enough space for all of them but then whenever I have burn, he ends up 30% to 78% finished and says it can not burn the cd any longer and the CD do not work in any cd player or my own computer now I wonder why it won't let me burn.  The error report always says that the burner is busy, even if it burns only one of the disks.  What should I do?

=======================================
It is possible that you may have hardware problems with
the burner, but first of all, I think I'll try a different software.

The following freeware can burn an Audio CD (music)
or a data CD which could be MP3s, if your drive is
compatible with MP3s.

(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)

DeepBurner Free
http://www.DeepBurner.com/index.php?r=download
(Windows XP/Vista/7)

The following links may be worth a visit:

How to burn CD/DVD with Deep Burner
http://www.ehow.com/how_4494548_burn-CDDVD-deep-burner.html

Deep Burner free - create a Real Audio file Audio MP3 CD
http://www.YouTube.com/watch?v=CqpjCQNHdVs

Tags: Windows

Similar Questions

  • I had called a few days before asking to NOT renew my membership automatically & don't charge ME but does not. Help, please!

    He's very frustrated without any formal following up and comments after talking to your online services. Help, please!

    I shared the details in private message.

    Concerning

    Megha Rawat

  • Try to download adobe first pro, but does not appear in the computer

    Try to download adobe first pro, but does not appear in the computer

    Premiere Pro is 64-bit.

    You must run a 64-bit operating system to install and run Premiere Pro.

  • MacBook / J4580 All in One / software Parallels - does not PRINT - HELP Please

    I'm going to lose my job in real estate - I have a Macbook - when I'm on the side of Mac - the printer works - and print.  However, when I'm in Parallels - it does not recognize - only get the message "printer error".  Real estate agency associated with the elements run only windows - so I spend a lot of time in the analogies.  Our it guy at the office said to make sure I have install the CD on the side, parallels - but this doesn't work either.  Called the Apple Support - they could not answer for Parallels - cost of Parallels for their support - so I will try this forum first, before I have to pay to see if anyone else has encountered this.  Thank you!

    This can be a Parallels in question, but let's get XP work just before mess us with Paralalls:

    Verify that you can access the web page internal to the printer by its IP address.

    1. click on the 'Start' button--> printers and fax machines.
    2. under print jobs, click on "add a printer".
    3. click on 'Next' on the Add Printer Wizard window.
    4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click on 'Next' and follow the instructions.
    5. now, select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

    6. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
    7. Add the name of print spooler, and then click "next".
    8. click on "next".
    9. click on "Next" and "Finish."

  • Permissions of third-party software does not. Help, please

    I have a major problem with El Capitan at the moment and I was wondering if anyone can help or has the same problems.

    What happened completely out of the blue and everything was working fine until yesterday to the top. The Mac does not seem to be recognizing my permissions of software. I opened my copy of IK Multimedia Amplitude 4 like I do every day to work and a message pops up saying

    'AmpliTube 4 is not permitted. The 10-day grace period expired. Click OK to start the IK Multimedia Authorization Manager or click Cancel to continue. "I have already registered this product through the Manager of authorization of the IK Multimedia comes out when I install everything first. I've never seen this message before, it is not logical at all! Then I entered the codes of the series in the handler permission again and it fixed the problem (even if it's not necessary) and today I turn on the Mac and the problem has started again.

    Then I went to another application I use every day called Sibelius by Avid. Same thing happened. Then I got the registration codes, and now it seems to be okay. I tried to open another application I use Ableton Live and it says the same thing again. I double click my authorization file that I have to do this and it says that the file is not valid for this computer.

    I'm sure that there is a problem with El Capitan not recognizing my authorization to use the software, I installed. It's too much of a coincidence that 3 3 companies software different all stop working at the same time, right? I called Apple support and they tried to get me to reset the permissions on the apps but it still does not and in the end they told me to contact software manufacturers. If anyone can help I would really appreciate it I use this software for my work and I need their work as soon as POSSIBLE.

    Thank you very much

    Simon

    Unless you have purchased these applications via the Mac App Store, OS X has no mechanism to allow the use of the installed software. This is the license code is written in the app or a license of Add-ons Manager. Licensing may not be compatible with El Capitan, but this is the limit of the participation of El Capitan in the licensing process for these applications.

  • HP pavilion dv9925nr sound does not work help please

    Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic

    Hello:

    Then I recommend that you follow the instructions in the guide to the link I posted above.

    After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:

    Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

    Pilot modded by silver here

    Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
    Not to connect, install from a list or specific location,
    Select don't search, I will choose the driver to install.
    For the hardware Type select 'show all devices '.
    Remove control "Show compatible hardware" and click on 'disk '.
    Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when he complains, Reboot.

    If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.

    Paul

  • I can not load or chat it says I need 2 install adobe Flash 10 player I think I deleted a driver by mistake it says its installed but still not working help please

    I can't load my video or chat online it says I need 2 install adobe flash 10 drive I install but when I try always says I need to install 2 I think I deleted a driver by mistake help please thx

    Hello

    Flash can get corrupted

    Download and save the uninstaller flash on your desktop or wherever you like from the link below

    then right click on the uninstall program saved flash and run as administrator and uninstall flash player

    http://kb2.Adobe.com/CPS/141/tn_14157.html

    then download the latest version of the reader direct flash from adobe on the link below

    Uncheck the 1 google toolbar before downloading

    http://get.Adobe.com/flashplayer/

    and for more information on this problem if needed:

    below link is Adobe flashplayer support forums:

    http://forums.Adobe.com/community/webplayers/flash_player

    help troubleshooting Adobe flash player

    http://www.Adobe.com/support/flashplayer/

  • updates does not stop, help please

    I'll start, windows update, and a window opens which gives me a button "check for updates".  I click the button and it starts to run, looking like it is looking for updates.  But just to stay there and keeps going, never arrived.  I said "check for Updates" and the color of the bar moves from left to right as if she does something.  It will continue for a day or two sometimes and end with something indicating that it cannot check the updates.  Help, please

    Start by:

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • My application get Windows 10 does not work HELP Please

    1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:

    The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10

    2. when I click on view Confirmation it Says:

    YOUR UPGRADE IS RESERVED

    There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.

    and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10

    Please help thanks

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    or

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Comparison of simple table does not. Help, please!

    I struggled with this problem for a few days now, and I'm slowly losing my mind.

    • I am in Adobe Acrobat 10.
    • I have a field called button group: btn0, btn1, btn2, etc..
    • I have a band called text fields: txt0, txt1 txt2, etc..
    • I have a script that takes the value of txt0 and makes the legend of btn0 and so on.
    • I have a script that sets the btn0 to setFocus txt0 MouseUp action, and so on.
    • These scripts work very well.
    • I have a script that takes values of all fields txt and sort puts them in a table.
    • I have a script that takes the array element [0] and makes the legend of btn0 and so on (alphabetical list of buttons).
    • These scripts work very well.
    • I am trying to compare the value of the array element [0] to each field txt to find the match, then set the action MouseUp btn0 to setFocus to the corresponding txt field, and so on (until my alphabetical list points to the correct location).
    • It is here where I am at a loss.

    Here's what I have:

    specified fields txt

    txt0 var = this.getField ("name of Z");

    txt1 var = this.getField ("name");

    etc.

    put their values in an array named rxArray

    var rxArray = [txt0.value, txt1.value]; etc.

    sort the table

    rxArray.sort ();

    Set the legends on the sorted array elements

    for (var i = 0; i < 5; i ++) {}

    var b = ("btn" + i);

    this.getField (b) .buttonSetCaption (rxArray [i]); works very well; sort by alphabetical order of the list of buttons

    Here is what goes wrong

    for (var x = 0; x < 5; x ++) {}

    var r = ("txt" + x);

    If (rxArray [i] == r.value) {}

    var s = (r + ' ". setFocus();" ');

    this.getField (b) .setAction ("MouseUp", s);

    }

    }

    }

    end

    Here's what I know:

    Alphabetical order and labeling works very well, but the MouseUp scripts to buttons work at all. Nothing happens.

    If I change the piece next to the above script:

    If (rxArray [i] == r.value) {}

    var s = (r + ' ". setFocus();" ');

    this.getField (b) .setAction ("MouseUp", s);

    To do this:

    If (rxArray [i] == txt1.value) {}

    var s = (r + ' ". setFocus();" ');

    this.getField (b) .setAction ("MouseUp", s);

    Because rxArray [0] is equal to the value of txt1 ("name"), then the MouseUp script for btn0 Gets the value:

    Txt4.SetFocus ();

    So I know that, whenever the nested loop runs, the case statement is true, and the setFocus script updated. Until the end of the loop, leaving the setFocus as last run element. Then why my script does not work? It should only update the setFocus script IF the array element matches the txt field and it is on THIS field of txt.

    Please please help. I know I'm missing something simple somewhere.

    I don't see why you would need tables at all... For example, sortNumber.

    You can essentially all this code replace it with this:

    for (var x = 0; x)< 5;="" x++)="">

    var t = this.getField ("t" + x); the text field

    var b = this.getField ("btn" + x); the button

    b.buttonSetCaption (t.value);

    var s = "this.getField('"+_t.name_+"').setFocus()";

    b.setAction ("MouseUp", s);

    }

    It is the same for the rest of your code as well.

    With respect to the addNew function, you must add a pause command inside the if statement to prevent continue further after the first empty field has been found.

  • Dreamweaver CS4 errors, Spry widget does not. Help, please!

    I remodel a website and downloaded the this contact page html file. I opened it in Dreamweaver and I started getting this error. I opened the html file has some JavaScripts inside and I think, the scripts had a conflict with Dreamweaver CS4. I already deleted these files, I tried to open it and I always meet these errors.

    These are the errors I get:

    1. when I open Dreamweaver, this pop-up message:
    "While executing onLoad in RecordsetFind.htm, the following JavaScript error has occurred:
    In the file "RecordsetFind".
    findRs is not defined. »
    2. I click OK. Then I get this message:
    "While executing onLoad in design Notes_onOpen.htm, the following JavaScript error has occurred:
    In the file "Notes_onOpen Design".
    onOpen is undefined. »
    3. I just click OK. When I open a html file to edit or create a new, this error pops up again:
    "While executing onLoad in design Notes_onOpen.htm, the following JavaScript error has occurred:
    In the file "Notes_onOpen Design".
    onOpen is undefined. »
    4. I shall yet once just click OK, then this error:
    "The following translators were not loaded due to errors:
    ColdFusion.htm: has configuration information that is invalid.
    SpryWidget.htm: has configuration information that is invalid. »
    5 then, I will just click OK again. Then, when I'm working with projects or create a new project with Spry, it does not work properly. I got the code and update the list Spry or content manually.
    6. when I close Dreamweaver, I always have this error:
    "While executing onLoad in TeamAdminTempDelete.html, the following JavaScript error has occurred:
    In the file "TeamAdminTempDelete".
    delTempFile is not defined.

    I tried to uninstall the Dreamweaver and install again, but it did not work.

    What should I do to make the spry works again and remove all those annoying errors? Furthermore, all my Spry widgets do not work and these errors I encounter in all the Sites that I'm trying. How can I make it work again? I tried the search problems in CS4, but I couldn't see one, only in CS3.

    Help, please.

    See if the following can help (found in the Dreamweaver FAQ)

    JavaScript and other unexpected errors

    --
    Mark A. Boyd
    Keep-on-Learnine :-)
    This message was processed and published by Jive.
    It will not be considered an accurate representation of my words.
    She may not even have been designed as a response to your message.

  • Inserting a record does not. Help, please

    Hello;
    I'm puzzled. I am trying to get this code to insert a new record, but as it passes through the code, it loses the record and he does not db insert. What Miss me? I can't understand.

    My code:

    < isDefined ("Form.newEdit_OK") cfif >

    < isDefined ("Form.RecordID") cfif >
    Here's my query, if it is updated and existing record
    < cfelse >
    < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
    INSERT INTO news
    (title, newsDate, htmlList)
    VALUES (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.title #" >,)
    < cfqueryparam cfsqltype = 'cf_sql_date' value = "#form.newsDate #" >.
    < cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.body #">) "
    < / cfquery >
    < cflocation url = "news_RecordView.cfm" >
    < / cfif >

    What did I miss? I can't understand.

    CFmonger

    I have correct if/else for problems like this:


    true

    fake

  • I try to use Lovefilm with Silverlight, but does not work. Also how to make a permision in Silverlight for Lovefiulm box

    Siverlight I give permissions. How can I Lovefilm in this box, so I can use it to watch movies like this will not work in Loveilm.

    Hi MayflyQT,

    1. what browser do you use?

    2. What is the exact error message that you receive?

    You can follow this link & check if the problem persists:

    https://www.LOVEFiLM.com/help/dyn_faqs.html?editorial_id=40849

    Hope the helps of information.

  • I had to re - download the Firefox browser and don't have the "most visited" tab and followed suggestions, but does not. Help

    I went to about: config and clicking browser.newtabpage.enabled clicked on it and then right click and rest, then went to browser.newtab.url and clicked on it and then right click but reset is not active, so can not click on it. How can I get the most visited tab?

    What the page that you get if you open the topic: newtab page via the address bar?

    See also this article on the page tab (topic: newtab):

  • My time machine is just stuck on the preparation of backup but does not - any help appreciated.

    Hi, my Apple Time Machine is just sitting on "Preparing Backup"... .initially it says cannot backup disks so I hard re - adjust time machine and now he is right on "Preparing backup" for hours and hours, any help would be appreciated.

    'Préparation' is going to take ages if you did a Hard Reset on the Time Capsule.

    Make sure that you are not trying to save more wireless, which will take 3 - 5 times longer, on average, that direct Ethernet connection between your Mac and the time Capsule.

    Even with a direct Ethernet connection, you might see "Préparation" for a few hours before the real return to start.

Maybe you are looking for