Try to connect the XBOX to the PC, need to be upgraded to Vista or Windows 7?

Similar Questions

• try to connect the blue ray player to my laptop, everything works except the connection to the gateway?

  try to connect the blue ray player to my laptop, everything works except the connection

  Hi ArnoldWalterArnold,

  What exact error message that you receive?
  How do you connect your Blu - ray player to your laptop?
  This thread may contain information that can help you:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/playing-an-external-Blu-ray-drive-on-laptop/cfeeeacc-043d-45B7-9570-dbefb9c9172d

• "Gateway router not found" error when you try to connect the TiVO DVR with DLink router.

  Original title: gateway router not found

  try to connect the tivo series 2 to the internet with dlink router that he used to work with previous tivo but not with tivo now, it says gateway router not found
  However, my laptop works fine with the router, I tried tivo support nothing helps, too, if I use the phone line works of tivo, but do not store a lot and is running out of room so it will not work fo rme, helllpppppppp thanks

  Hello

  Where exactly you get this error message?

  See the troubleshooting suggested in "Network error message N07 or C107" steps from this link.

  If you try to connect the tivo series 2 to the internet with dlink router then check out the link below:

  http://support.TiVo.com/app/answers/detail/A_ID/400

  Please contact the manufacturer.

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• "When I try to load the game Empire Total War I have a Microsoft window error ' Empire: Total War has stopped working"

  Original title: when I try to load the game Empire Total War I have a Microsoft window error

  Empire: Total War has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2 have you tried the troubleshooting steps to solve the problem?

  I suggest you try the steps and check them off below.

  Step 1: Update the video card driver.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download and install the latest version of DirectX.

  Reference:
  How to download and install DirectX
  http://support.Microsoft.com/kb/179113

  Step 3: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also try contacting the seller game to help on this issue.
  http://forums.Sega.com/

  I hope this helps.

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the check disk error

  I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the following message and there's like this. I tried to cancel the disk check with in 10 seconds by pressing a key, but it still is not.
  Message:
  "Checking file system on C:.
  The type of the file system is NTFS.
  One of your disks needs to be checked for consistency. You can cancel the disk check, but it is highly cool that you continue.
  To check the disk a press any in 10 second (s). »

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1?

  I have Vista 32 bit Home Premium.It does not support Windows Mail.Which is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1? I do not have a touch screen system, my system is five years old.

  Original title: upgrade

  Hello WilliamPopat,

  If you want to buy an another operating system, you would do better to buy the latest version, i.e., Windows 8.1 it doesn't matter that you don't have a touch screen like Windows 8.1 will work just as well on a desktop PC / laptop normal.

  However, before rushing and buying a copy of Windows 8.1, I suggest that you look at this link http://www.eightforums.com/tutorials/11885-windows-8-upgrade-assistant-download-run.html the link above shows Windows 8 Upgrade Wizard you can download (free) and allows you to check that your PC is compatible with the latest version of Windows.

  According to me, one of my office machines is around 5 or 6 years and Windows 8/8.1 works fine on it.  However, it is best to check your own machine with the wizard upgrade just in case.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I'm upgrading from Vista to Windows 7 and download repeat myself "content of the file could not be verified."

  I tried to download the upgrade from Vista to Windows 7 (32 bit) and get the following message is displayed.

  "The file could not be verified."

  Please directly contact the Microsoft Store.

• The upgrade from Vista to Windows 7: How can I make sure that I keep Microsoft Office

  A few months back I took advantage of this offer to upgrade from Vista to Windows 7 for a discounted price. After that I downloaded the upgrade file, Upgrade Advisor told me that because I'm using Vista business and I was upgrade 7, that my computer would probably be home must pass through with a 'clean install', thus wiping my hard drive.

  That's fine with me, I could just move my documents and Favorites on an external hard drive. But I'm afraid that the upgrade will be wipe my Microsoft Office programs.

  I bought this computer a few years ago. I don't even know if I bought the program with office bundled with it, or if I bought it separately (and probably the discs are somewhere in storage).

  How can I make this update without losing Microsoft Office? Is it possible to confirm if my word has come with my computer or if I installed it separately. If it came with it, and I lose it, certainly there must be a free way for me to recover. Right?

  Any other advice for someone planning on the upgrade?

  Thank you!

  You're the one who knows if you installed Office.

  Office (Word, etc.) comes for free with Windows. you have to buy.

  If Office is preinstalled, it was a test.

  A clean installation will wipe everything.

  You cannot transfer programs.

  It needs to be reinstalled from the original media.

  If you do not have the desktop drive:

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• I try to connect the Qosmio F20 for TV

  Hello

  I'm trying to connect my laptop to TV F20.
  Using S-video - cable Composit
  shown in pic blew :-|

  http://aycu32.Webshots.com/image/21471/2000131229832581606_rs.jpg
  ATTENDANT: to display in my laptop on the TV.

  But infortunaly doesn't worke with me.
  Could you help me please?

  Hello. try to get an s-video cable SCART like this:

  http://www.Redcoon.es/index.php/cmd/shop/a/ProductDetail/PID/B105731/CID/9016/Monster_Cable_S_Video_Scart_THX_2M/

  then with the computer laptop power supply, connect the s-video out "s-video" port of the laptop and plug the SCART to tv. Turn on the laptop and the TV. When the operating system is fully loaded, click the magic button (buttons below the screen) monitor out (with a TV and an arrow going right symbol) and click on the remote control tv set to AV.
  now, what you were writing on the laptop must be seen on the TV.

• Error 800703eb when you try to connect the network printer

  HII guys, can someone help me on this problem?

  I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

  The following vbs code to connect the computer to the network printer:

  1. '
  2. ' Printers.vbs - Windows Logon Script.
  3. Set objNetwork = CreateObject
  4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

  I am very grateful to the response of anyone on this issue, thank you very much.

  Hello

  (1) have you made changes before the start of this issue?

  (2) what is the brand and model of the printer?

  Perform a clean boot and try to connect to the printer:

  Step 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Try to download and install the latest printer drivers.

  Please visit the websites below:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• Try to connect the Svideo TV

  I am trying to hook up a TV with S-Video with my laptop.  I plug the cables & when I go to the screen & my 2nd monitor/tv is not an option.  It's only as 1 to my laptop screen.  I'm trying to detect & still no solution...

  Most of the standard definition TVs supports only video composite or S-video connections. If your computer supports one of them, you may be able to connect it to your TV. However, both of these connection types will result in displays that are not as sharp as the results you get with an HDTV or a standard computer monitor.

  The following scenarios show you how you can connect a computer to a standard definition television:

  If your computer has this type of output port	It should work with this type of TV input port	By using this type of cable
  Composite video	Composite video	Composite video composite video
  S video	S video	S video S-video

  Connect your computer to your TV

  1. After that you have the right cable, follow these steps to connect your computer to your TV:

  2. Turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.

  3. Connect the video cable appropriate to your computer's output to your TV.

  4. Turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.

  5. Turn on your computer.

     You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably need to adjust the reference resolution in Windows. For more information, seeGetting the best display on your monitor.

     If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

  Notes

  • Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported audio signals, but not all HDMI-enabledvideo audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from computersound directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, cards seeSound: frequently asked questions.

  • If your computer does not support the type of video connection you need, you may be able to install a newvideo card that has the right connection.

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.