Try to download itunes HELP!

Similar Questions

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• Every time I try to download iTunes I get error 2096

  When I try to download iTunes I get error 2096 remove iTunes and download again

  The third section on the next page might be worth a visit:

  iTunes for Windows: how to disable Compatibility Mode
  http://support.Apple.com/kb/index?page=search&src=support_site.kbase.search&locale=en_US&q=2096

• Try to download itunes.

  Try to download itunes for my ipod on Windows Vista Edition home premium and get the error message: windows service install could not be accessed.  This can happen if the installation program is not properly installed.

  Hello tizerinkdom,

  Method 1:

  You can also check using provided below steps for windows service installation state. After the reset of the service, you can check if the problem is solved-

  a. go to Start and click on ControlPanel

  b. then all theelements of thePanel control, and then AdministrativeTools .

  c. here, click Services , and double-click the Windows Installerservice.

  d. set the startup type of the service Manual.

  e. now right-click and click Start to start the service. Note the error message, if any.

  f. click Ok.

  Method 2:

  Reregister Windows install

  To re-register the Windows Installer, verify the location of the Msiexec.exe file on your hard disk and in the Windows registry, and then re-register Windows Installer. To do this, follow these steps.

  Determine the location of the Msiexec.exe file on your hard drive. To do this, follow these steps:

  a. click Start, click run, type %windir%\system32and then click OK.

  Note This step opens the folder where the Msiexec.exe file is located.

  (b) take note of the location of the Msiexec.exe file. The location of theMsiexec.exe file will be a combination of the value in the text box address and the name of the file Msiexec.exe himself.

  For example, if the address text box contains a value of C:\Windows\system32, the location of the Msiexec.exe file is C:\Windows\system32\Msiexec.exe.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Make sure that the location of the Msiexec.exe file in the registry editor is correct. To do this, follow these steps:

  a. click Start, click run, and type regedit in the Open text box, and then click OK.

  b. expand HKEY_LOCAL_MACHINE, expand SYSTEM, expand CurrentControlSet, expand Services, and then click MSIServer.

  c. in the pane on the right, right-clickImagePath, and then click change.

  d. inthe value data text box, type the location of the Msiexec.exe file that you determined in step 1, followed by the valueof/v/v, and then clickOK.

  For example, if the location of the Msiexec.exe file is C:\Windows\system32\Msiexec.exe, type the following text in the value data text box:

  C:\WINDOWS\System32\msiexec.exe /V

  e. click OK to close the dialog box change the channels .

  f. click on the file menu and then click Exit to close the registry editor.

  Start your computer in safe mode, and then register the Msiexec.exe file. To do this, follow these steps:

  a. clickStartand then click shut down the computer or Shut Down.

  b. Select therestart option, and then click OKor clickrestart.

  c. press F8 before the Windows splash screen appears.

  d. in Windows Advanced Option menu, use the arrow keys to select theSafe Mode option and then press ENTER.

  e. If you use a un ordinateur computer dual-boot or multiboot, select the operating system in the list that appears and press ENTER.

  f. connect to the computer.

  g. click Start, click run, type msiexec/regserver in theOpen text box and then clickOK.

  Note For 64-bit operating systems, you must also register the 64-bit MSI installer again. To do this, click Start, click run, type %windir%\Syswow64\Msiexec/regserver in theOpen text box, and then clickOK.

  On 64-bit Windows operating system editions, the binary 32 bits are located in the %systemroot%\SysWow64 folder. Files 64-bit binaries are located in the %systemroot%\System32 folder.

  h. clickStartand then click shut down the computer or Shut Down.

  i. Select therestart option, and then click OKor clickrestart.

  Method 3: Reinstall Windows install

  To reinstall Windows Installer, rename the damaged Windows Installer files, and then reinstall the Windows Installer. To do this, follow these steps:

  1. click on Start, click run, type cmd in the Open text box, and then clickOK.

  2. type cd %windir%\system32and then press ENTER.

  3. type attrib-r-s-h dllcacheand then press ENTER.

  4 type ren msi.dll msi.old, and then press ENTER.

  5. type ren msiexec.exe msiexec.oldand then press ENTER.

  6 type ren msihnd.dll msihnd.old, and then press ENTER.

  7. type exitand press ENTER.

  8. at the command prompt, typeexitand press ENTER.

  9. click on Startand then click shut down the computer orShut Down.

  10 select the restart option, and then click OKor click restart.

  11 log in the computer.

  12. download and install the latest version of Windows Installer. For more information about how to obtain Windows Installer, click on the number below to view the article in the Microsoft Knowledge Base:

  893803 (http://support.microsoft.com/kb/893803/) Windows Installer 3.1 v2 (3.1.4000.2435) is available

  13. click on Startand then click shut down the computer or Shut Down.

  14 select the restart option, and then click OKor click restart.

  Method 4:

  Also, try to uninstall and reinstall itunes:

  http://support.Apple.com/kb/HT1923

  Kind regards

  Savan Microsoft technical support.

• DEP stopped the program when you try to download iTunes

  Original title: try dwnld, computer iTunes won't let me. Is it really a threat

  Arrested DEP. program saying that it was dangerous.

  Hello DeBorah Dixon,.

  Data Execution Prevention (DEP) is a security feature of Windows, tracks how programs use memory. If DEP finds memory used incorrectly, DEP closes the program and let you know.

  Step 1:

  Try the following steps to turn off DEP for iTunes and check if you can download iTunes.

  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.

  b. click on advanced system settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. running, click settings.

  d. click the Data Execution Prevention tab and then click on turn on DEP for all programs and services except those I select.

  e. restart and see if it is resolved.

  Check out the link:

  Change Data Execution Prevention settings

  http://windowshelp.Microsoft.com/Windows/en-us/help/1d9bb9b4-f6ba-466D-AC2B-7b8c4f8361611033.mspx

  If you're still having problems, you can read the following article and try to uninstall and reinstall iTunes:

  http://support.Apple.com/kb/HT1923

• get rid of Win32 application when you try to download itunes for windows xp

  I am trying to download itunes on my laptop with Windows XP. Whenever I have start downloading, a pop-up window appears indicating that itunes is not a valid win32 application. How can I fix this problem?

  Hello

  I suggest you follow the troubleshooting steps form these links and check if it helps.

  iTunes: Windows reports that "the iTunesSetup.exe is not a valid Win32 application".

  http://support.Apple.com/kb/ts1406

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/ht1926

• try to download itunes but it said done but with errors

  Im trying to re install itunes, but at the bottom left of the page that it is said in fact but with errors on the page, any help please...

  You can try to contact Google or Apple for assistance.

• no solution does not work when you try to download itunes 10, I'm at my wits end. What can we do?

  I have everything all except unistall Windows Vista, is there something else I can do?

  You could try and uninstall all references to iTunes on your computer.

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. QuickTime
  3. Apple Software Update
  4. Apple Mobile Device Support
  5. Hello
  6. Application of Apple Support (iTunes 9 or later)

     Then a few solutions that worked is to install and erarlier version of iTunes as there have been some problems with version 10.

     If you work with Microsoft supports a call, it would be better to continue with this support.

     Otherwise, I would contact Apple for support of iTunes.

  Sincerely,

  Marilyn

• Unknown Publisher, no digital certificate valid when you try to download iTunes on Apple site

  Hello

  I can't install itunes from the apple website. Windows detects an error message Unknown Publisher 'digital certificates valid'.

  I have a Windows xp service pack 3 and internet explorer 8.

  Can you please provide instructions and the resolution of this problem of Windows.

  Concerning

  Peter

  Hello

  1. are you able to install other programs through Internet explore?

  2. what version of iTunes you trying to install?

  Method 1: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers

  Method 2: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

  Hope this information is useful.

• Try to download iTunes but get message that it is dangerous

  I disabled the microsoft security essentials and mcafee but my computer keeps saying: it was considered unsafe. What should I do?

  Heather

  Hello

  You have programs Microsoft Security Essantials both of McAfee Anti-Virus installed?

  You must have AN antivirus installed

  having more than one AV installed will cause system problems

  Here is the McAfee removal tool

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

• Apple won't let me download iTunes

  Hello

  When I try to download iTunes 32-bit (this is my system) it asks me to download iTunes 64-bit because my PC is 64-bit. It is not, it is 32-bit. When I try to download 64 bit, Windows just says: "this is not a valid Win32 application". Help?

  If you have trouble downloading the installation file from iTunes to the current address try; Uncheck the box "Keep me updated", clear the cache of your browser, change the settings of the blocker, a right-click or ctrl - click on the download button, using a different browser, or by using the direct links here.

  See troubleshoot problems with iTunes for Windows updates if you have additional problems at the facility.

  TT2

• Try to download QuickTime and this happens QuickTimeInstaller.exe has been reported as dangerous. How can I download?

  Try to download QuickTime and it comes up with a warning that quicktimeinstaller.exe has been reported as unsafe. This also occurs when you try to download ITunes 10.5.   How can I download the two of them then?

  If you could help it would be great.
  Thank you

  Do not run the installation from its current location, instead, save it locally on your hard drive in the downloads folder and then run the Setup file from there to iTunes and QuickTime.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Trouble installing iTunes or QuickTime for Windows

  iTunes for Windows Vista or Windows 7: Troubleshooting ...

• Try to install iTunes but computer says that administrator has set policies to prevent this installation.

  original title: help please

  try to download itunes on my computer, but it says administrator has set policies to prevent this installation how do I get it to where I can change this and download itunes

  You can download other programs or is this just a problem with iTunes. ?

  I suggest that you do a right-click on the itunes file and select "Run as Administrator".
  This helps to get installed it?

  Answer please come back and let us know.

  Thank you

• Cannot download itunes on windows XP displays error 7 (windows error 193)

  Try to download itunes on my computer. It shows error 7 (windows error 193). I got it on my computer recently, but after I synchronize with an ipad that won't work so I deleted and tried to download.

  My apple on my desktop password is different than on my ipad. Could be the problem?
  Help!

  Hi maureengaunt,

  Follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Apple.com/kb/HT1926

  How to solve problems when you install or uninstall programs on a Windows computer

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Reference: http://support.apple.com/kb/TS1421

• I can't download itunes

  I am running windows vista family premium, I try to download Itunes one send a message [there is a problem with this windows package install.] A program required for this install to complete could not be run. Contact your provider to support personal or package.  What should I do to enable installation complete

  You are in the wrong forum.  This forum is for the installation of Windows itself.  ITunes is a program from Apple.  You must use the Apple help to

  http://www.Apple.com/support/iTunes/

  and answers Vista forum programs at the

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs?tab=all